Shock and vibration detector plus magnetic contact for window, door, wall or ceiling. Digital shock detector, with a magnetic door / window contact for internal use. The attack is detected as soon as the intruder tries to force, break, pierce or even see through the protected window, door, wall or ceiling. Power 9V - 16 VDC 8.5 mA (17 mA Max). Dimensions: 25 x 85 x 95 mm detector, 10 x 12 x 58 magnetic contact.

White inertial detector with magnetic contact for mounting in roof, wall, frameworks and windows. 6 meters reach. Requires GS615 card to connect to the central. Dimensions: 72 x 27 x 25 mm.

White autonomous inertial detector for mounting in roof, wall, frameworks and windows. 6 meters range. Requires GS615 card to connect to the central. Dimensions: 72 x 27 x 25 mm.

White autonomous inertial detector for mounting in roof, wall, frameworks and windows. 6 meters range. Led indicador. Comes with adhesive. Dimensions: 93 x 30 x 25 mm.

Optical, thermal and thermo-velocity smoke via radio detector. Extraction protection. Auto adjustable sensitivity level. Status information led. Frequency 868Mhz (GEN 2). Reach via 150m outdoor radio. Includes siren 85dB at 3m (continuous sound). Dimensions: 142x61mm. CPD Certificate (EN14604).

Bidirectional 868 MHz radio flood detector. Grade 2. Cable of a 1 meter included. Contains back tamper and box tamper. 128 bit encrypted radio protocol. Operating temperature: -10 to 40 ºC. Power: 1 CR2 battery.

Wireless photoelectric smoke detector. With 85 dB at 3 m built-in sounder. EN50131 Certificate, Grade 2. Compatible PYRONIX ™ systems. Fully supervised: Tamper, failure, low battery. It works with 1 lithium battery, type CR123A of 3 V.

Z-Wave timer switch. Compatible with Risco - EL system. Allows control through APP. Schedule programming. On / Off Control. Dimensions: 85mm x 85mm x 44m.

Smoke and heat detector via unidirectional / bidirectional radio, 868MHz frequency. Anticipated detection of fire alarm in different environments and the reduction of false alarms. It has two heat sensors which measure the fixed temperature and the rapid increase of it, with precise measurements and high immunity against false alarms. CR123 3V lithium battery included. Compatible with RISCO™ unidirectional and bidirectional wireless systems.

Optical and thermal smoke via radio detector, frequency 433Mhz (63bit). Selectable detection technology, smoke and heat, or smoke or heat. Siren included 85dBA at 3 meters, test button with led, 8 selectable sound tones. Heat sensitivity from 58º to 72º C. 2 batteries. Certificate with respect to EN14604: 2005 / AC: 2008 and BS5446-2: 2003. Dimensions: 109x62mm.

The GS960 series are acoustic glass break detectors that emit an alarm when the glass breaks in intrusion attempts through windows, doors and glass walls. They use an advanced microcontroller technology that is programmed to take into account many relevant acoustic factors. Using “Digital room compensation”, these detectors can distinguish between a true glass break and other irrelevant sounds. In parallel, the design of the detectors makes them suitable for wall or ceiling mounting, as long as they have a free “line of sight” for the window being protected. The GS960AM is also equipped with an AM function, a separate relay, which emits an alarm to sabotage the microphone. By completely sealing the microphone with elastic material, such as chewing gum or insulating tape, it will be detected. When these materials are removed, the sensor will return to its normal state. Certified model in Grade III. Three detection ranges: Zone 1: 4 to 9 m Zone 2: 2 to 4 m Zone 3: 1 to 2 m. Dimensions: 68x109x40mm.

Tool to calibrate the GS960xx series detectors. The GS960-TR tester is a specially developed tool to calibrate and adjust the GS960 for optimal operation in the acoustic space; the procedure of digital compensation of DRC rooms. Using this tool to test the detector settings, it is not necessary to open it again, as the tester will communicate acoustically with the detector.

GS960-RB is a plug-in EOL line end resistance card. It allows you to easily integrate GS960 into an existing Advisor Advanced system without the hassle of adding line end resistors.

The GS960 series are acoustic glass break detectors that emit an alarm when the glass breaks in intrusion attempts through windows, doors and glass walls. They use an advanced microcontroller technology that is programmed to take into account many relevant acoustic factors. Using the “Digital compensation of the room”, these detectors can distinguish between a true glass break and other irrelevant sounds. In parallel, the design of the detectors makes them suitable for wall or ceiling mounting, as long as they have a free “line of sight” for the window being protected. Certified model in Grade II. Three detection ranges: Zone 1: 4 to 9 m Zone 2: 2 to 4 m Zone 3: 1 to 2 m. Dimensions: 68x109x40mm.

Acoustic glass break detector (Hardened or Laminated) in white colour for surface mount. Range of 7,6 meters x 360º. Working temperature from -18ºC to 50ºC. Dimensions: 65 x 25 x 35 mm.

Test unit for any microphone detector.

Test unit for GS Glass break detectors. 9 V battery. 8 hours autonomy.

Glass break autonomous passive detector in White colour. Provide with a 3 meters cable. Relay output. IP67. Working temperature from -25ºC to 70ºC. Dimensions: 37 x 19 x 12 mm. Radio range of 20 meters.

Glass break autonomous passive detector in White colour. Provide with a 3 meters cable. Relay output. IP67. Working temperature from -25ºC to 70ºC. Dimensions: 37 x 19 x 12 mm. Radio range of 6 meters.

Glass break autonomous passive detector in White colour. Provide with a 3 meters cable. Relay output. IP67. Working temperature from -25ºC to 70ºC. Dimensions: 37 x 19 x 12 mm. Radio range of 2 meters.

Acoustic glass break detector (Hardened or Laminated) in white colour for surface mount. Range of 7,5 meters x 360º. Working temperature from -18ºC to 50ºC. Dimensions: 83 x 45 x 23 mm.

Laminated glass break autonomous passive detector in White colour. Provide with a 3 meters cable. IP67. Working temperature from -25ºC to 70ºC. Dimensions: 37 x 19 x 12 mm. Radio range of 20 meters.

Laminated glass break autonomous passive detector in White colour. Provide with a 3 meters cable. IP67. Working temperature from -25ºC to 70ºC. Dimensions: 37 x 19 x 12 mm. Radio range of 6 meters.

Glass break autonomous passive detector in White colour. Provide with a 2 meters cable. IP67. Working temperature from -25ºC to 70ºC. Dimensions: 37 x 19 x 12 mm. Radio range of 20 meters.