English
Español
  • Search
    • +34 902930427

    0.00 €

    Intrusion

    Products 1561
    • Access Control Readers
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    HONEYWELL™ Intelligent Relay Board - G2 [4204EU2]
    HONEYWELL™ Intelligent Relay Board - G2
    Ref.: 4204EU2
    The 4204 Intelligent Relay Board adds relays which are connected to the Control/Communicator via the control's console wiring. The relay outputs are programmed by the appropriate control for a variety of functions. The 4204 is ideal for applications that require additional sounding devices, strobe lights or other devices that need or desire to be controlled by the control panel. The 4204 is housed in a white plastic case for wall mounting and can be mounted in a Universal Can. If the 4204 is remotely mounted, there are provisions to tamper protect the cover, and the unit so that it cannot be disconnected from the console wiring without detection be the control.
    V.A.T. included
    108.52 €
    HONEYWELL™ Wired Zone Expander - G2 [4219EU2]
    HONEYWELL™ Wired Zone Expander - G2
    Ref.: 4219EU2
    Wired Zone Expander. Adds up to 8 end-of-line supervised zones. Connection made to the control's console wires. Supported on VISTA-12 & VISTA-48.
    V.A.T. included
    167.88 €
    32 Zones RISCO™ Expansion Module - G3 [RP128EZB000C]
    32 Zones RISCO™ Expansion Module - G3
    Ref.: RP128EZB000C
    Additional 32 zone BUS expander module for LightSYS™ and ProSYS™ / ProSYS™ Plus main panels. EN50131 GRADE 3 certificate. Each BUS zone expander creates a separate BUS branch. Each expander can be configured to support 8, 16, 24 or 32 detectors in BUS. The BUS branch increases the total security of the system in case a certain BUS detector is sabotaged. It has the function of isolator and concentrator. The RISCO™ BUS detectors allow its remote adjustment. Connection to BUS. Max. distance: 300m. Consumption: 20mA (typical).
    V.A.T. included
    Consult
    Universal Z-Wave Switch for RISCO™ [ 1RPZWVB868EU]
    Universal Z-Wave Switch for RISCO™
    Ref.: 1RPZWVB868EU
    Z-Wave timer switch. Manufacturer: Secure SIR321. Power supply: 230V at 50Hz. Maximum control power: 3000W.
    V.A.T. included
    167.55 €
    RISCO™ Wireless Video Module [RP432EWV8000A]
    RISCO™ Wireless Video Module
    Ref.: RP432EWV8000A
    Video Expander for Wireless ProSYS™ Plus. To directly connect the main panel.
    V.A.T. included
    Consult
    16 Zones RISCO™ Expansion Module - G3 [RP512EZ1600A]
    16 Zones RISCO™ Expansion Module - G3
    Ref.: RP512EZ1600A
    Expansion module of 16 conventional wired zones for ProSYS™ Plus. EN50131 GRADE 3 certificate. Allows the extension of wired zones. Each zone can be NO / NC EOL-DEOL-TEOL with 1ms response time. Connection to BUS. Max. distance: 300m. Consumption: 20mA (typical), 100mA (max).
    V.A.T. included
    Consult
    16 Zones RISCO™ X-10 Expansion Module [RP296EXT]
    16 Zones RISCO™ X-10 Expansion Module
    Ref.: RP296EXT
    X-10 expander module for LightSYS™ and ProSYS™ / ProSYS™ Plus main panels. It allows to control up to 16 X-10 devices. The activation of X-10 devices can be done by the user or automatically. Provides physical communication interface between the control panel and the X-10 devices. Connection to BUS. Max. distance: 300m. Consumption: 3mA (typical).
    V.A.T. included
    Consult
    8 Outputs RISCO™ Expansion Module - G3 [RP296E08000A]
    8 Outputs RISCO™ Expansion Module - G3
    Ref.: RP296E08000A
    Expander module with 8 open collector outputs for LightSYS™ and ProSYS™ / ProSYS™ Plus main panels. EN50131 GRADE 3 certificate. Each output can be activated by different events related to the system. Possibility of programming NO or NC. Only the circuit without box is supplied. 8 outputs of 100mA open collector. Connection to BUS. Max. distance: 300m. Consumption: 25mA (typical), 30mA (max).
    V.A.T. included
    Consult
    Wireless 433-868 MHz Converter for UTC™ LoNa™ (10 Pcs. Pack) [RF-9201-07-1-KIT-10P]
    Wireless 433-868 MHz Converter for UTC™ LoNa™ (10 Pcs. Pack)
    Ref.: RF-9201-07-1-KIT-10P
    433 MHz 63bit or 433 MHz LoNa support selectable. Compact size and modern design. No external antennas. Visualization of sensor RSSI, Noise Floor Level, Battery level. Board only.
    V.A.T. included
    2,932.73 €
    Wireless 433-868 MHz Converter for UTC™ LoNa™ [RF-9201-07-1]
    Wireless 433-868 MHz Converter for UTC™ LoNa™
    Ref.: RF-9201-07-1
    433 MHz 63bit or 433 MHz LoNa support selectable. Compact size and modern design. No external antennas. Visualization of sensor RSSI, Noise Floor Level, Battery level. Board only.
    V.A.T. included
    268.89 €
    UTC™ LoNa® Bidirectional Via Radio 433MHz I/O Module [RF-IO100-K4]
    UTC™ LoNa® Bidirectional Via Radio 433MHz I/O Module
    Ref.: RF-IO100-K4
    Bidirectional inputs/outputs module wired and via radio with LONA protocol, 433Mhz frequency. Easy to install, includes tamper against tampering. Dimensions: 155x144x44mm.
    V.A.T. included
    Consult
    UTC™ QuikBridge 433 MHz [RXI4N8]
    UTC™ QuikBridge 433 MHz
    Ref.: RXI4N8
    The RXI4N8 Quikbridge Loop Receiver is a universal wireless receiver compatible with any standard hardwired control panel. Available with a wide range of wireless devices, including keyfobs, passive-infrared detectors, door/window detectors, smoke detectors and medical panic buttons, every system can now be virtually wire-free.The Quickbridge features patented Learn-ModeTM technology, which means that each device has its own factory-programmed identity, so the receiver automatically recognises each device. This dramatically reduces installation time and eliminates programming errors in the field.
    V.A.T. included
    191.63 €
    UTC™ Interface for glass break detectors [GS330]
    UTC™ Interface for glass break detectors
    Ref.: GS330
    Interface to connect GS200 glass break detector to ATS centrals. Dimensions: 85 x 85 x 26 mm.
    V.A.T. included
    108.92 €
    UTC™ Zone expansion modules Gen2 [TX-9001-03-1]
    UTC™ Zone expansion modules Gen2
    Ref.: TX-9001-03-1
    Relay via radio 868Mhz Gen2. Allows expand the signal distance for any 868Mhz Gen2 device. With sabotage tamper. Doble antenna for better transmission quality . Supervision from the central. Have diagnostic tools. Power source: 12VDC
    V.A.T. included
    Consult
    UTC™ Advisor Advanced Zone expansion modules - G2 [ATS1235]
    UTC™ Advisor Advanced Zone expansion modules - G2
    Ref.: ATS1235
    16 Zones radio receiver module for Advisor Advanced and Advisor Master centrals, totally supervised. BUS connection. 868Mhz Frequency (GEN2). Work temperature from 0ºC to 60ºC. 12Vcc Power source. Dimensions without antenna: 104 x 132 x 27 mm. Dimensions with antenna: 192 x 132 x 27 mm. Security grade 2 certified.
    V.A.T. included
    196.83 €
    UTC™ Relay Module for Seismic Detectors [VVI770]
    UTC™ Relay Module for Seismic Detectors
    Ref.: VVI770
    NC outputs relay plate for seismic detector VV700. Dimensions: 60 x 50 x 12 mm.
    V.A.T. included
    89.99 €
    UTC™ Card for inertial connectors [GS615]
    UTC™ Card for inertial connectors
    Ref.: GS615
    Connection card up to 20 interial connectors from GS700 serie to ATS centrals.
    V.A.T. included
    84.30 €
    UTC™ ATS1821 Relay Expansion Module [ATS1821]
    UTC™ ATS1821 Relay Expansion Module
    Ref.: ATS1821
    Expandable board of 8 open collector outputs for ATS centrals and ATS1201E expander module and ATS1250 door controllers module. Security grade 3 certified.
    V.A.T. included
    Consult
    UTC™ ATS1820 Relay Expansion Module [ATS1820]
    UTC™ ATS1820 Relay Expansion Module
    Ref.: ATS1820
    Expandable board of 16 open collector outputs for ATS centrals and ATS1201E expander module and ATS1250 door controllers module. Security grade 3 certified
    V.A.T. included
    Consult
    UTC™ ATS1811 Relay Expansion Module [ATS1811]
    UTC™ ATS1811 Relay Expansion Module
    Ref.: ATS1811
    Expandable board of 8 relay outputs (C,NC y NA) for ATS Master central, ATS1201E, ATS1250 y ATS624 modules expander. Security grade 3 certified. Compatible con Advanced central with ATS624 board. Power source 10.5-13.8 VDC (Nominal 12 VDC) .
    V.A.T. included
    203.33 €
    UTC™ ATS1810 Relay Expansion Module [ATS1810]
    UTC™ ATS1810 Relay Expansion Module
    Ref.: ATS1810
    Expandable board of 4 relay outputs (C,NC y NA) for ATS Master central, ATS1201E, ATS1250 y ATS624 modules expander. Security grade 3 certified. Compatible con Advanced central with ATS624 board. Dimensions: 80 X 52 mm. Power source 10.5-13.8 VDC (Nominal 12 VDC) .
    V.A.T. included
    107.01 €
    UTC™ RC213 Relay Expansion Module [RC213]
    UTC™ RC213 Relay Expansion Module
    Ref.: RC213
    Relay board to convert a open collector outputs in a free tension contact (C, NC o NA).
    V.A.T. included
    20.32 €
    UTC™ ATS1211E Zone Expander Module [ATS1211E]
    UTC™ ATS1211E Zone Expander Module
    Ref.: ATS1211E
    Expander module with 8 inputs expandable to 16 and 8 OC outputs with ATS1810, ATS1811 o ATS1820 board connector in a steel box with tamper. Up to 16 outputs. Power sourced by the same bus. Dimensions: 124 X 84 X 34 mm. Security grade 3 certified.
    V.A.T. included
    317.48 €
    UTC™ ATS1204E Zone Expander Module [ATS1204E]
    UTC™ ATS1204E Zone Expander Module
    Ref.: ATS1204E
    8-zones expander module, expandable to 32 by ATS1202 with connector for ATS1810, ATS1811 o ATS1820 outputs boards (Up to 16 outputs) in a steel box with tamper and a siren output. Power source to 220VAC. Dimensions PDB: 175 X 90 mm. Security grade 3 certified. ATS1642 box, dimensions: 460 x 475 x 160 mm. Power source: 13,8Vcc/3A.
    V.A.T. included
    745.55 €
    SYSAWAY© 2024 All rights reserved