Redwall-V™ Outdoor PIR detector with zero angle independent detector (5m x 5m). Range: 50m x 30m. Covering (Zero zone): 3 x 5 m installed at 2,3 m height, 6 x 9 m installed at 4 height. Detection of ambient temperature and light for an automatic management of the sensitivity. Advanced detection algorithm. Piro-elements Double dual/uno quad with Double patented conductive shield for core area.

Redwall-V™ Outdoor PIR detector with advanced detection algorithm. Range: 30m x 20m. Installation height: 2,3 to 4 m. These detectors have anti-rotation and anti-masking functions. Likewise it can detect vandalism attempts or sensor manipulations. These functions improves security during operation. Operating temperature: -25 to +60°C, -40 to +60°C with heating unit.

Passive Infrared (PIR) sensor that includes a sophisticated short-range anti-masking system designed to activate an alarm when it detects any attempt to bypass the sensor by obstruction. Also noteworthy is the activation against possible attempts to manipulate or remove the sensor 24 hours a day thanks to the front and rear tampers. The MX-12FAM PIR detector performs a simultaneous analysis in two zones (Dual): horizontal and descending, thus avoiding false alarms caused by small animals, inclement weather and vehicles at the edge of the area. An important novelty is the double configuration that allows choosing between a detection of up to 12m, differentiating between the left and right area, with a 90º angle and configurable 180º coverage, with an output for the activation of a CCTV or additional devices. With its detection pulse count and sensitivity adjustment, the MX-12FAM PIR sensor is able to maintain operational stability even under extreme conditions.

Outdoor digital infrared detector. Coverage: 11x11 meters, 90º angle. UV protected lens. Dual optics filtering system. Multilevel sensitivity adjustment. Two operating modes: addressable with Digiplex Evo ™ and conventional relay operation. -35 ° C ~ + 50 ° C operating temperature. Housing resistant to impacts and sudden changes in temperature. Housing sealed with injected rubber. Ball joint SB85. Certificate Grade 2 according to EN 50131.

The WXS series is OPTEX's new commitment to sensors with 180 degree panoramic detection, with flexibility in the distance and configuration of the detection area, as well as low mounting option (0.8-1.2 m) or high mounting (2 m), IR self-learning and anti-masking logic. Ideal for perimeter protection or flat roofs in residential or commercial facilities. Up to 12m, 180 degrees, outdoor PIR with anti-masking. 4 PIR offering double detection left / right, with animal immunity. Mounting option low (0.8m-1.2m) or high (2m). Independent left and right alarm detection and output - ideal for CCTV.

PIR tiple reflector. Range up to 15m x 80°, Mounting height 2 - 6m, IP55. Anti pets. Configurables detection area. With antimasking. Available in white or black (White lens only).

Outdoor PIR via Radio. Range: Up to 12m x 90°, head with adjustable dual sensor. Back box. Compatible with large part of transmitters available in the market (Transmitter and batteries not included). Ultra low power consumption that provides a long life for the battery and alarm outputs and solid state tamper (NA/NC), Compatible with most important wireless transmitters and better diffusion for rapid implementation in remote areas or with difficulties to be wired. Its Outdoor implementation against intruders is perfect to activate CCTV, lights, or warning for domestic, commercial and industrial applications.

Outdoor infrared passive detector, range 12m, frequency 868Mhz. Mounting with ball joint not included. Detection method: 2 PIR channels with 2 separate detection areas and adjustable range, antimass. Mounting with ball joint and optional long-range lens. Outdoor installation, with visor and IP65 environmental protection. Mounting height: From 0.80 to 1.20 meters. 3V Lithium battery included. Dimensions: 230 x 121 x 123 mm. Compatible with RISCO™ unidirectional wireless systems.

PIR tiple reflector. Range up to 15m x 80°, Mounting height 2 - 6m, IP55. Anti pets. Configurables detection area. Disponible in White or black (White lens only).

D-TECT 50 is a motion detector which comply BS8418 standards and combine advanced signal processing and a unique optical system allowing to configure beam Range between 25 and 50 meters. Allows to prevent traspasar property limits, its particularly effective for perimeter detection.

Outdoor PIR. Range: Up to 12m x 180°, 2 ajustable detector heads. Holds dual zone detection system for exterior detection of problem-free movements, by integrate key details such as daytime/nocturnal discrimination, alarm timer or variable time alarm relay, NA/NC output, impulse counter and sensiblility adjustment.

PIR wired color camera for Flex V3. IR coverage range 11 x 12m. Selectable sensitivity regulation. Immunity to pets up to 36 kg. Resolution of the camera 640 x 352 pixels. Capacity of up to 100 images. Switching to B & W and IR LEDs to capture images in low light conditions. Capture of images in alarm, pre-alarm and on demand. Power 8.2VDC min - 15VDC max. Dimensions 145 x 64 x 65 mm. EN50131-2-2 Grade 2 certificate.

Infrared sensor (passive) via radio. Scope: 11 m x 12 m. Compatible with Domonial, Vista and Galaxy® systems. Double temperature compensation with automatic threshold adaptation. Pulse counter and sensitivity selectable. TAMPER: opening and wall mounting. Bidirectional communication via radio (RF). Power supply: 1 LI03V battery (supplied) duration: 5 years. Dimensions: 112 x 60 x 40 mm. EN50131-2-2 Certificate: 2008 Grade 2 environmental class II. Adjustable immunity option for pets, from 0 to 36 kg.

Adapter cable for GPRS antenna. Pack of 5 units.

Bidirectional IP communicator for Galaxy Flex v3 (Intellibus) panels. TCP / IP encrypted communication protocol ATS 6. NIC 10/100 Mbits.

Modem for remote bidirectional communications and local programming of some controls (see specifications). It works with power 220 V, 50 hz; and it is supplied with a 9 VAC plug-in transformer. Communication speed up to 2400 Baud. It uses a standard RS232 modem cable with a DB25 connector. It has a separate modular telephone jack to connect a local telephone device; interface cable supplied. Dimensions 150 x 160mm x 45 mm. Contains indicators for: CD Detection Carrier (carrier), OH Offline. RX Receive Data. TX Transmit Data. DTR Terminal Data List.

Serial Interface Module. Interface for printer for: VISTA-120. Direct wire download interface for : 4140XMP, VISTA-120.

The GSM/GPRS module can be used to equip sites with no telephone line (e.g., a second home) and allows remote monitoring to be set on partially or fully unbundled sites with no Internet connection available for the alarm system. Includes: GSM/GPRS (800/1800 MHz). SIM Card slot. Built-in antenna.

The GSM/GPRS and Ethernet module can be used to equip sites with no telephone line (e.g., a second home). The Ethernet feature allows the alarm and remote monitoring to be set on partially or fully unbundled sites. Includes: GSM/GPRS (800/1800 MHz), SIM Card slot, Built-in antenna, Ethernet (10 MHz), RJ45 Connector.

Bidirectional GSM / GPRS communicator for Galaxy Flex v3 (Intellibus) panels. Encrypted communication protocol ATS 6.

Provides alarm signalling and remote servicing support for Galaxy systems via 10 Base T Ethernet LAN/WAN supporting TCP/IP protocol. Compliant to EN50131-3:2009, EN50131-6:2008, PD6662:2010, Security Grade 3, Environmental Class II, ATS Class 4.

Communication module designed for integration industrial systems such as alarms, central fire control systems, etc ... The E20GD module incorporates the following ports: 1 x RS232, 1 x Ethernet (ADSL, LAN, etc ...), 1 x Modem GSM (GSM, SMS, GPRS). 2 x Open-Collector Outputs. • The drive configuration is done through console commands, SMS and the E20Term program configuration. Compatible with Galaxy Dimension Alarm Panels GPRS with SIA 3 and 4 protocol. Compatible with Honeywell R-receiving TCP / IP for Galaxy SIA and R20 ALWON. Integrated in the Galaxy Dimension panel through serial port. Bidirectional with Galaxy Dimension Panel for GPRS and Ethernet. Compatible with Dynamic IP and installations DNS supports. Power: from 12 Vdc to 30 Vdc.

This module provides alarm signaling and remote servicing support for Galaxy systems via 10 Base T Ethernet LAN/WAN supporting TCP/IP protocol. This is a direct mount Ethernet module, and can be mounted into the existing control panel housing, thus resulting in time and cost savings due to no extra box to install and wire. Savings can also be made as there are no extra costs for additional cabling requirements.

This module provides alarm signaling and remote servicing support for Galaxy systems via 10 Base T Ethernet LAN/WAN supporting TCP/IP and GPRS protocol. This is a direct mount Ethernet module, and can be mounted into the existing control panel housing, thus resulting in time and cost savings due to no extra box to install and wire. Savings can also be made as there are no extra costs for additional cabling requirements.