Viper GLX ASIC controlled Shock Sensor, Switch selectable patented Double Knock and Remote LED reset options. Dual sensitivity control, auto reset of relay contacts. First to alarm option (Viper GLX only). Integral door contact (Viper GLX with contacts only). Switch selectable patented Double Knock. Remote LED reset options. Dual sensitivity control, auto reset of relay contacts. Walk Test facility LED can be controlled remotely. 5mA quiescent. Coverage: nominally 2.5m radius. Sensitivity individually adjustable. Dimensions (h x w x d): 85 x 25 x 23mm.

The Viper perimeter products offer the most extensive range and are tailored to the needs of both the installer and the end user. First to alarm option (Viper GLX only). Integral door contact (Viper GLX with contacts only). Non gravity dependent. Walk test facility. Remote reset. White or brown option. Patented “commando boot” base.

CO GEN 2 via radio detector with frequency 868AM for exclusive residential applications, includes electrochemical sensor (10 year service life) with detection range of 50, 100, 300 PPM and with an alarm response time of less than 3 minutes, acoustic siren and led indicator. Powered by 1.5V alkaline batteries type AAA included. Compatible with the ATS1235 radio receiver and the ATS Advanced and Master control panel range, it can also operate autonomously without connection to any intrusion panel. Dimensions: 119x70x47mm.

Wireless flood / freeze sensor has two technologies on board in a fairly small housing: one is capable of detecting water while the other will check if the ambient temperature drops below a specific value. It comes with a support that is placed on the sensor and mounted on the floor or on the wall to prevent it from moving in case of flooding. Due to its small size, the sensor can be placed under sinks, toilets, hot water tanks, in a basement or behind a washing machine, which makes it ideal for high-risk areas and reduces the potential for environmental risks. The freeze detection function warns if there is a possibility that the pipes will freeze. If the sensors detect water or the temperature drops below 5 ° C, an alarm message will be sent to the control panel. Coverage 14º to 70º, maximum reach 15mx13m. Dimensions: 70x120x75mm. IP 65

Bidirectional wireless CO detector. 85 dB built-in sounder. EN50131 certificate, grade 2. Compatible for PYRONIX™ systems. Fully supervised: Tamper, failure, low battery. It works with 3 AA batteries. Autonomy 2 years.

Carbon monoxide detector. 868 MHz Frequency. EN50291 Certified. High sensitivity electrochemical sensor. LED status viewer with buzzer test button. Supplied with 9V alkaline battery. Roof installation.

Unidirectional radio gas detector, frequency 868Mhz Detects the accumulation of cooking and heating gases, including butane, propane and methane (Natural Gas), which could indicate a leak and potential danger." Lithium battery CR123 3V included.Compatible with RISCO™ unidirectional and bidirectional wireless systems.

The FP-2500E sensor combines flame detection and infrared detection up to 10 meters away, pet immune option and adjustable detection area for the infrared part, alarm memory, and time selection for flame detection. Independent detection outputs, combined “AND” detection output for a configurable time period, and forced alarm skip regardless of the setting for reoccurring or continuous flame detection for more than 15 or 30 seconds.

Ideal for outside rooms where glass breakage may not be audible, the Breakglass 2000 security sensor will alert you if glass is broken or flexed on your property. With its exclusive frequency detection protocol, the Breakglass 2000 sensor eliminates the excess noise that could trigger false alarms and only focuses on the relevant frequencies. Maximum range of 8 m to the glass. 360 ° coverage. Microprocessor technology Detection of breaking and flexing frequency. Installation test mode. Option for blocking mode. Dimensions: 90 x 90 x 30 mm. Grade 2.

Flame detector with intrusion detection system output. Range up to 10m (Flame of 7cm).Includes omnidirectional support. With 80dB inner buzzer.

Flame detector with intrusion detection system output. Range up to 10m (Flame of 7cm). Adjustable detection zone. With 80dB inner buzzer.

Glass break detector. 2m range (in 3mm glass). Alarm indication LED. TAMPER. IP67. EN50131-2-6 Grade 2, class III.

Flame detector with intrusion detection system output. Range up to 10m (Flame of 7cm). Working with batteries or DC extern power supply. With 80dB inner buzzer.

Flame detector with intrusion detection system output. Range up to 10m (Flame of 7cm). Working with batteries (2 alkaline batteries type 3) or DC extern power supply. With 80dB inner buzzer.

Detector with dual self-powered outdoor technology. Coverage 12 m. X-band microwave frequency (10,525 GHz). Mounting height 1m. Active IR anti-masking. Dual layer digital detection. 5 adjustable detection ranges. 5 detection pattern options. Small animal tolerance function. Detection pattern of 90º, rotatable 180º. Auxiliary input for use with a second device or photocell. IP55 environmental protection. Temperature range: -20 to 45 ºC. Powered by 3 to 9 Vdc alkaline or lithium battery (not included), types CR123 x 3 (PL30), CR2 x 3, 1 / 2AA x 3 or 6 pcs. (PL36). Battery holder not included (ref. RBB01). Transmitter not included. Maximum consumption: 8 mA at 3 Vdc. Dimensions: 185.9 x 71.3 x 105.5 mm.

Detector with dual self-powered outdoor technology with anti-masking. Coverage from 2.5 to 12 m, independently configurable both in distance and intensity. 14 horizontal detection stripes. Small animal immunity. Possibility of masking an unwanted detection area with internal masking plates included with the detector. Wall or pole mounting (with accessory ref. PMP-01). Mounting height: 0.8 to 1.2 m. Possibility of installation at 2.0 m with reduction of the PIR distance to 9 m. Temperature range: -20 to 45 ° C. Powered by 3 to 3.6 Vdc alkaline or lithium battery (not included), types CR123 x 1 (3 Vdc, 1300 mAh), CR2 x 1 (3 Vdc, 750 mAh) or 1 / 2AA x 1 (3, 6 Vdc, 1000 mAh). Battery holder not included (ref. RBB01). Transmitter not included. Maximum consumption: 6 mA at 3 Vdc. Dimensions: 201.5 x 91.7 x 124.3 mm.

Dual technology (IR + MW) 90º via radio detector with Learn Mode technology. Supervised every 17 minutes. Reach: 12 meters. Installation height: 1.8 to 3m. Transmission conditions: Alarm, tamper and low battery. Frequency 868Mhz (GEN2). Outdoor range: 400m. Working temperature: -10ºC to 50ºC. Dimensions: 120x70x50mm. Certificate Degree of Security 2.

Volumetric coverage of 12 meters. Volumetric lens with 85° coverage, 60 zones and 7 planes. Dual technology detector. Technology via bidirectional radio Enforcer. Instantaneous bidirectional control device (ITDC, for its acronym in English). Transmitter to 868 MHz FM technology. Indicators of signal strength (SSI). Optimum installation height of 1.8 ~ 2.4 meters. Automatic sensitivity Protection of zero angle zone. 3 microwave frequencies to avoid interference. Digital temperature compensation. Blue Wave technology. Digital compensation of temperature. Independent LED indicators. Includes front and back protection against tampering. Includes 2 CR123A 3V lithium batteries. Minimum battery life of 2 years. Storage temperature of -20° C ~ 50° C. Certified operating temperature of -10° C ~ 40° C. Rated operating temperature of -10° C ~ 50° C. Dimensions (without support): 117 (H) x 69 (W) x 59 (F) mm. ABS plastic. EN50131 Grade 2 certificate, environmental class II.

La serie WXS es la nueva apuesta de OPTEX por sensores con detección panorámica 180 grados, con flexibilidad en la distancia y configuración del área de detección, así como opción de montaje bajo (0,8-1,2 m) o montaje alto (2 m), lógica de autoaprendizaje IR y anti-enmascaramiento. Ideal para protección de perímetro o techos planos en instalaciones residenciales o comerciales. Hasta 12m, 180 grados, PIR para exteriores con anti-enmascaramiento. Doble tecnología (4PIR + 2MW), detección de tres capas e inmunidad animal. Opción de montaje bajo (0,8m-1,2m) o alto (2m). Detección y salida de alarma independientes izquierda/ derecha - ideal para CCTV.

10 meters dual volumetric technology motion detector. Coverage of 5 planes and 52 zones. Immunity to pets up to 20 kg. Technology via bidirectional radio Enforcer. Indicators of signal strength (SSI). Long battery life with instantaneous bidirectional control device (ITDC). Highly secure 868 MHz transmitter, FM technology. Optimum installation height of 1.8 ~ 2.4 meters. Automatic sensitivity Blue Wave technology. Digital temperature compensation. 3 microwave frequencies to avoid interference. Includes front and back protection against tampering. Independent LED indicators. Includes 2 CR123A 3V lithium batteries. Minimum battery life of 2 years. Storage temperature of -20° C ~ 50° C. Certified operating temperature of -10 ° C ~ 40 ° C. Rated operating temperature of -10° C ~ 50° C. Dimensions (without support): 117 (H) x 69 (W) x 59 (F) mm. ABS plastic and sealed optics. EN50131 Grade 2 certificate, environmental class II.

PIR outdoor wireless detector, with double technology (double pyro-sensor and microndas), and active LED antimasking. Main features: Flexible range (2.5-3.5-6-8.5-12m), sensitivity adjustment (H, M, L), and advanced processing logic SMDA (Super Multi-Dimension Analysis) to avoid false alarms. Double conductive mesh (patented) to avoid interference. Ceramic plate microwave module. Reach up to 12m, 90 °. Mounting height 0.8 - 1.2m. IP55. It includes a protected box on the back to house the via radio transmitter. Power from 3 to 9 V.

Volumetric detector via radio 868 MHz, triple technology (2PIR + MW) for outdoor. Coverage 10 m and 85 ° with 78 zones at 5 levels. Immunity to pets up to 10 kg. Active anti-mask system adjustable between 0 and 1 m. Vegetation roll filter, to avoid false alarms in windy weather conditions. Self-adjusting sensitivity according to environmental conditions. Blue Wave technology (BWT), the detector is immune to the infrared noise of the environment. New system of 3D optics that allows a better infrared focus. Digital temperature compensation. Protection against high levels of UV rays. Built-in buzzer to facilitate test during installation. 3 different microwave frequencies to avoid interference. Radio protocol encrypted 128 bits. Installation height 2, 4 m. Temperature: -30 to 55 ºC. IP55 protection. Power supply: 2 3V / 5Ah batteries (ref BATT-ES1). Autonomy: 3 years. Dimensions: 180 x 80 x 105 mm.

DT detector with outside metal enclosure. Reach up to 30m. Three lens options (27m x 15m, 30m x 10m, 38m x 6m). Joint performance of Doppler stereo microwave and passive IR. Controlled by microprocessor. Digital control of sensitivity. Enhanced immunity to birds and pets. Power: 8.5 to 20 VDC. Consumption: 150 mA @ 12 VCDC (LED off). Working temperature -40ºC to + 70Cº). Output relay 0, 1A 50V.

Outdoor/Indoor Waterproof Anti-masking Detector. * Two PIR sensors. Microwave sensor. Waterproof and all-weather resistant. Frontal Anti-masking, by active infrared. Anti-case-shifting, by inertial switch: Alerts when detector has been shifted. Microprocessor controlled. Selectable PIR detection sensitivity. Adjustable Microwave detection sensitivity. Selectable detection combination type (AND / OR). Memory latched input. Wide-angle (1100) field-of-view. Auto temperature compensation. High level of RFI/EMI immunity. Vertical adjustment.