Surface push button, normally open, recommended for all types of doors, even narrow frames. Surface mount. Mechanical life: 500,000 keystrokes. Material: Silver Alloy, steel button.

Door release buttons are the most common and the most frequently used in the access control systems. Mainly used by public institutions, banks, large, small and medium-sized enterprises, stores and residences. Stainless steel Panel with Elegant Style. 500.000 Cycles tests. Three Contact Output. Suitable for all kinds of Locks Releases.

ACL800FL-PB is a flush mount request-to-exit button, it will work independently (standalone) or can equally be connected via a controller to provide exit from a secured area (Push button input). Includes a buzzer and a dual LED with internal or external control. ACL800FL-PB can work in pulse (3, 5, 10 seconds) or latch mode.

The CL800-PB series is a surface mount push button requesting an output request, operates independently or can also be connected through a controller to provide output from a secure area (push button input). It includes buzzer and a double status LED. It can work in pulse mode of 3, 5, 10 sec or lock. It can be used with all standalone ACL87xsu / FL-Bx biometric readers. Dimensions: 92x51x27mm. Power 9 to 14 VDC.

The CL800-PB series is a surface mount push button requesting an output request, operates independently or can also be connected through a controller to provide output from a secure area (push button input). It includes buzzer and a double status LED. It can work in pulse mode of 3, 5, 10 sec or lock. It can be used with all standalone ACL87xsu / FL-Bx biometric readers. Dimensions: 92x51x27mm. Power 9 to 14 VDC.

The CL800-PB series is a surface mount push button requesting an output request, operates independently or can also be connected through a controller to provide output from a secure area (push button input). It includes buzzer and a double status LED. It can work in pulse mode of 3, 5, 10 sec or lock. It can be used with all standalone ACL87xsu / FL-Bx biometric readers. Dimensions: 92x51x27mm. Power 9 to 14 VDC.

Exit request pushbutton, surface mounting. Dimensions: 76 x 72 x 32 mm. Weight: 25gr.

1 channel touchless transmitter in black polycarbonate. Frequency: 433.92 MHz. Modulation: AM / ASK. Coding: Keelog Rolling Code. Compatible with all CDVI® receivers. Visual and sound signaling. Dimensions: 105 x 70 x 23.5 mm. IP55. Operating temperatures: -20ºC to 80ºC. Power supply: 1 x ER14505 Lithium battery.

1-channel white polycarbonate touchless transmitter. Frequency: 433.92 MHz. Modulation: AM / ASK. Coding: Keelog Rolling Code. Compatible with all CDVI® receivers. Visual and sound signaling. Dimensions: 105 x 70 x 23.5 mm. IP55. Operating temperatures: -20ºC to 80ºC. Power supply: 1 x ER14505 Lithium battery.

Wireless transmitter to install in standard wall electrical box, with 4 channels. Fit for blinds and awnings. Frequency: 433.92 MHz. Modulation: AM / ASK. Coding: Keelog Rolling Code. Compatible with all CDVI® receivers. Up to 200m (in open field). Dimensions: 80 x 80 x 15 mm. Requires 1 CR2032 battery.

1 channel wall transmitter for outdoor installation. Ideal for activating exterior lights, garage doors and gates or barriers. Frequency: 433.92 MHz. Modulation: AM / ASK. Coding: Keelog Rolling Code. Compatible with all CDVI® receivers. Up to 800m (in open field). Dimensions: 93 x 67 x 66 mm. Power supply: 230 VAC - 50 Hz. IP55.

1 channel touch transmitter in black polycarbonate. Frequency: 433.92 MHz. Modulation: AM / ASK. Coding: Keelog Rolling Code. Compatible with all CDVI® receivers. Visual and sound signaling. Dimensions: 105 x 70 x 23.5 mm. IP55. Operating temperatures: -20ºC to 80ºC. Power supply: 1 x ER14505 Lithium battery.

1-channel white polycarbonate touch transmitter. Frequency: 433.92 MHz. Modulation: AM / ASK. Coding: Keelog Rolling Code. Compatible with all CDVI® receivers. Visual and sound signaling. Dimensions: 105 x 70 x 23.5 mm. IP55. Operating temperatures: -20ºC to 80ºC. Power supply: 1 x ER14505 Lithium battery.

Large active goal area. High quality stainless steel. Suitable for handicapped environments (people with reduced mobility). Recessed installation. Internal and external use. Dimensions: 130 x 130 x 72 mm.

Our range of infrared exit switches have a brushed stainless steel faceplate and are supplied surface mounted. These switches fit onto a standard UK back box, making them very flexible to install. Infrared detection allows switch activation with just a hand wave at 3-15 cm adjustment range, without needing to make contact with the device. This touch-free activation is ideal for sterile environments, DDA compliant installations and general high traffic areas such as hospitals, public buildings and colleges. The RTE-WIR can be connected directly to an access control device to be used as an exit button. The bi-coloured LED indicator gives visual verification of the device status. Sensor: infrared adjustable 3-15cm. Input Power: 12-24VDC. Operating Current: Stand By - 13mA, Active - 45mA. Relay Timed: 0.1 sec – 30 sec. Contact Rating: 24vdc 2A. Output Contact: Single Pole NO/NC/COM. Mechanical Life: 500,000. Operating temperature: -20°C to 55°C. Dimensions: 86 x 86 x 14mm.

Our range of infrared exit switches have a brushed stainless steel faceplate and are supplied surface mounted. Infrared detection allows switch activation with just a hand wave at 3-15 cm adjustment range, without needing to make contact with the device. This touch-free activation is ideal for sterile environments, DDA compliant installations and general high traffic areas such as hospitals, public buildings and colleges. The RTE-AIR can be connected directly to an access control device to be used as an exit button. The bi-coloured LED indicator gives visual verification of the device status. Sensor: infrared adjustable 3-15cm. Input Power: 12-24VDC. Opertaing Current: Stand By - 10mA, Active - 33mA. Relay Timed: 0.1 sec – 30 sec. Contact Rating: 24Vdc 2A. Output Contact: Single Pole NO/NC/COM. Mechanical Life: 500,000. Operating temperature: -20°C to 55°C. IP68 rated. Dimensions: 80 x 32 x 23mm.

The CDVI SIE-SSA is an LED traffic light system that can be used in access control solutions to let people know when they can and cannot enter a premises. For example, it can be used as part of Hikvision’s Density Control Solution to limit the number of people on a premises at any one time. This solution saves business owners time and money when enforcing social distancing in the fight against Coronavirus. Architrave sized design. 115 (L) x 44 (W) x 33 (D) mm. 12V DC.

The CDVI SIS-SSA is an LED traffic light system that can be used in access control solutions to let people know when they can and cannot enter a premises. For example, it can be used as part of Hikvision’s Density Control Solution to limit the number of people on a premises at any one time. This solution saves business owners time and money when enforcing social distancing in the fight against Coronavirus. Architrave sized design. 115 (L) x 44 (W) x 33 (D) mm. 12V DC.

Our range of infrared exit switches have a brushed stainless steel faceplate and are supplied surface mounted. Infrared detection allows switch activation with just a hand wave at 3-15 cm adjustment range, without needing to make contact with the device. This touch-free activation is ideal for sterile environments, DDA compliant installations and general high traffic areas such as hospitals, public buildings and colleges. The RTE-AIR can be connected directly to an access control device to be used as an exit button. The bi-coloured LED indicator gives visual verification of the device status. Sensor: infrared adjustable 3-15cm. Input Power: 12-24Vdc. Relay Timed: 0.1 sec – 30 sec. Contact Rating: 24Vdc 2A. Output Contact: Single Pole NO/NC/COM. Mechanical Life: 500,000. Operating temperature: -20°C to 55°C. IP68 rated. 80 x 32 x 23mm.

Vaulted exit button. Ergonomic design with ultrasensitive contact. Green. Flush mount. Very simple installation High reliability The connection is made using a microswitch on the back of the button. Vandal resistant Available versions: With wiring (ref. BNONFCHOCCAB). With wiring and trim frame (ref. BPNONFCHOCCAB). Possibility of surface mounting (ref. CBP).

Indoor narrow exit switch. Plastic exit switch for internal use. Supplied with a flush narrow back box.

Indoor standard exit switch. Plastic exit switch for internal use. Supplied with a flush back box, the platform is the UK standard back box, therefore the switch will fit on all UK single gang flush boxes.

Large active goal area. High quality stainless steel. Suitable for handicapped environments (people with reduced mobility). Flush installation. Internal and external use. Dimensions: 85 x 85 x 42 mm.

Surface box for BPNONF, BPNONFE and BPNONFCHOCCAB.