English
Español
  • Search
    • +34 902930427

    0.00 €

    Locks & Strikes

    Products 654
    Surface Box for DORCAS® V7 Solenoid Bolt Lock [V70]
    Surface Box for DORCAS® V7 Solenoid Bolt Lock
    Ref.: V70
    DORCAS® V7 electric bolt Overlay Accessory. Special covers for surface mounts.
    V.A.T. included
    Consult
    DORCAS® V7 Solenoid Bolt Lock [V7]
    DORCAS® V7 Solenoid Bolt Lock
    Ref.: V7
    The V7 electric bolt has an inverted or "normally open" operation: while the door is closed, they receive current and the bolt remains out; when pressing, the electrical flow is interrupted and the pin is hidden; when we close again, the magnet detects the closed position and activates the piston sensor, actuating the bolt and blocking the door again. The front of the piston and the frame to be installed in the frame stand out for its narrowness (22 mm) that makes the V7 suitable for all types of doors as well as being reversible. Among its uses, banks, access controls and security facilities stand out. It can be ordered with special covers for surface mounts.
    V.A.T. included
    Consult
    DORCAS® V11 Solenoid Bolt Lock [V11]
    DORCAS® V11 Solenoid Bolt Lock
    Ref.: V11
    The V11 electric bolt operates in inverted mode (fail safe) protecting the user's safety in the event of a power failure. It operates at 12V in direct current and has 4 levels of operating timing (0, 3, 6 and 9 seconds). The lock has a sensor in the bolt that serves as monitoring to know if the door is open or closed.
    V.A.T. included
    Consult
    DORCAS® V10 Solenoid Bolt Lock [V10]
    DORCAS® V10 Solenoid Bolt Lock
    Ref.: V10
    Electric bolt equipped with adjustable timing system. It works from 12 to 24V in DC. Its operation can be set for inverted mode (fail safe) and for normal operation (fail secure). It is suitable for double-leaf doors and has a monitoring sensor that identifies whether the door is open or closed. It is made of stainless steel and is fire resistant.
    V.A.T. included
    Consult
    CDVI® KDX200 Profile for DX200I [F0529000018]
    CDVI® KDX200 Profile for DX200I
    Ref.: F0529000018
    Aluminum profile with surface mounting. Housing for surface mounting for DX200I.
    V.A.T. included
    131.89 €
    CDVI® Solenoid Bolt Lock DX200I [F0529000016]
    CDVI® Solenoid Bolt Lock DX200I
    Ref.: F0529000016
    High security solenoid bolt lock. Free voltage: 12 to 24 VDC. Dead locking and spinning bolt with diameter of 14mm. Dry contact outputs (lock and door status). Round edges of the faceplate. Dimensions of the faceplate and the front face are identical, allowing the two elements to be inverted if required. Timer and monitored.
    V.A.T. included
    240.79 €
    CDVI® I180ER Electromagnetic Lock [F0515000002]
    CDVI® I180ER Electromagnetic Lock
    Ref.: F0515000002
    Mortice mount electromagnetic lock. Complete with armature plate. Monitored (lock status). Holding force: 180 Kgs. Built-in varistor (Electronic protection to eliminate back EMF). Outdoor installation. Made of stainless-steel.
    V.A.T. included
    219.01 €
    CDVI® V3S Electromagnetic Lock [F0526000001]
    CDVI® V3S Electromagnetic Lock
    Ref.: F0526000001
    EM Lock, surface mount, monitored (relay + door contact). Holding force: 300 Kgs. BLUE color LED (POWER ON). Includes safety rope. Built-in varistor (Electronic protection to eliminate back EMF).
    V.A.T. included
    Consult
    UTC™ Electromagnetic Suction Cup 15020N [FE390]
    UTC™ Electromagnetic Suction Cup 15020N
    Ref.: FE390
    15020N electromagnetic lock. Surface mounting. LED monitoring and relay output. Power 12 / 24V. Consumption: 330/170 mA. Dimensions: 218 x 35.5 x 30 mm, Weight less than 1.3 Kg. Temperature range: -40ºC to + 60ºC.
    V.A.T. included
    Consult
    UTC™ Electromagnetic Suction Cup 6000N [FE372]
    UTC™ Electromagnetic Suction Cup 6000N
    Ref.: FE372
    Electromagnetic lock of 6000N aluminum. Surface assembly. With double monitoring. Power supply to 12VDC / 24VDC. Dimensions: 268 x 73 x 40 mm.
    V.A.T. included
    Consult
    UTC™ Electromagnetic Suction Cup 5400N [FE371-N]
    UTC™ Electromagnetic Suction Cup 5400N
    Ref.: FE371-N
    Electromagnetic lock of 5400N. Surface mounting. LED monitoring and relay output. Power 12 / 24V. Consumption: 500/250 mA. Dimensions: 268 x 73 x 40 mm, Weight less than 4 Kg. Temperature range: -40ºC to + 60ºC.
    V.A.T. included
    Consult
    UTC™ Electromagnetic Suction Cup 2430N [FE323-N]
    UTC™ Electromagnetic Suction Cup 2430N
    Ref.: FE323-N
    2430N electromagnetic lock. Surface mounting. LED monitoring and relay output. Power 12 / 24V. Consumption: 500/250 mA. Dimensions: 238 x 26 x 48 mm, Weight less than 2 Kg. Temperature range: -40ºC to + 60ºC.
    V.A.T. included
    Consult
    UTC™ Electromagnetic Suction Cup 1800N [FE310]
    UTC™ Electromagnetic Suction Cup 1800N
    Ref.: FE310
    1800N stainless steel electromagnetic lock. Surface assembly. With monitoring. Power supply to 12VDC / 24VDC. Dimensions: 166 x 39 x 21 mm.
    V.A.T. included
    Consult
    UTC™ Electromagnetic Suction Cup 6000N [FE370]
    UTC™ Electromagnetic Suction Cup 6000N
    Ref.: FE370
    Electromagnetic lock of 6000N aluminum. Surface assembly. Without monitoring. Power supply to 12VDC / 24VDC. Dimensions: 268 x 50 x 25 mm.
    V.A.T. included
    Consult
    UTC™ Electromagnetic Suction Cup 3000N [FE321]
    UTC™ Electromagnetic Suction Cup 3000N
    Ref.: FE321
    Electromagnetic lock of aluminum of 3000N. Surface assembly. Without monitoring. Power supply to 12VDC / 24VDC. Dimensions: 268 x 50 x 25 mm.
    V.A.T. included
    Consult
    UTC™ Dual Electromagnetic Suction Cup (2 x 3000N) [FE130MD]
    UTC™ Dual Electromagnetic Suction Cup (2 x 3000N)
    Ref.: FE130MD
    Double electromagnetic lock, 2 x 3000N of holding force, monitored, for surface mounting. Power supply to (12VDC / 440mA or 24VDC / 220mA) x 2. Dimensions: 500 x 47 x 26 mm.
    V.A.T. included
    Consult
    UTC™ Electromagnetic Suction Cup 6000N [FE160MS]
    UTC™ Electromagnetic Suction Cup 6000N
    Ref.: FE160MS
    Electromagnetic lock, 6000N holding force, monitored, for surface mounting. Power supply to 12VDC / 450mA or 24VDC / 225mA. Dimensions: 266 x 73 x 40 mm.
    V.A.T. included
    Consult
    UTC™ Electromagnetic Suction Cup 3000N [FE130MS]
    UTC™ Electromagnetic Suction Cup 3000N
    Ref.: FE130MS
    Electromagnetic lock, 3000N holding force, monitored, for surface mounting. Power supply to 12VDC / 440mA or 24VDC / 220mA. Dimensions: 250 x 47 x 26 mm.
    V.A.T. included
    Consult
    UTC™ Electromagnetic Suction Cup 3000N [FE130MM]
    UTC™ Electromagnetic Suction Cup 3000N
    Ref.: FE130MM
    Electromagnetic lock, 3000N retention force, monitored, for recessed mounting. Power supply to 12VDC / 450mA or 24VDC / 225mA. Dimensions: 228 x 38 x 27 mm.
    V.A.T. included
    Consult
    UTC™ Electromagnetic Suction Cup 1500N [FE110US]
    UTC™ Electromagnetic Suction Cup 1500N
    Ref.: FE110US
    Electromagnetic lock, 1500N of holding force, not monitored, for surface mounting. Power 12VDC / 460mA or 24VDC / 230mA. Dimensions: 166 x 38 x 22 mm.
    V.A.T. included
    Consult
    CDVI® EM Handle PBO800RN60 [F0519000056]
    CDVI® EM Handle PBO800RN60
    Ref.: F0519000056
    Aluminium handle with 2 magnet lock of 400 Kgs and end caps in satin finish. Option for glass door: UBKPBO400RN40. Voltage input: 12/24 VDC (depending on installation).
    V.A.T. included
    461.01 €
    CDVI® EM Handle PBO400RN40 [F0519000046]
    CDVI® EM Handle PBO400RN40
    Ref.: F0519000046
    Aluminium handle with 1 magnet lock of 400 Kgs and end caps in satin finish. Option for glass door: UBKPBO400RN40. Voltage input: 12/24 VDC (depending on installation).
    V.A.T. included
    283.14 €
    CDVI® EM Handle P600RP [F0519000024]
    CDVI® EM Handle P600RP
    Ref.: F0519000024
    Aluminium handle with 2 magnet lock of 300 Kgs to install in any kind of door. Voltage input: 12/24 VDC (depending on installation). Options available.
    V.A.T. included
    442.86 €
    CDVI® EM Handle P300RP [F0519000023]
    CDVI® EM Handle P300RP
    Ref.: F0519000023
    Aluminium handle with 1 magnet lock of 300 Kgs to install in any kind of door. Voltage input: 12/24 VDC (depending on installation). Options available.
    V.A.T. included
    263.78 €
    SYSAWAY© 2024 All rights reserved