Expansion module with 4 outputs relays for LightSYS™ and ProSYS™ / ProSYS™ Plus main panels. Certified EN50131 GRADE 3. Each output can be activated by different events related to the system, partitions, zone or user. Possibility of programming NO or NC. Only the circuit without box is supplied. 4 output relays of 3A. Connection to BUS. Max. distance: 300m. Consumption 25mA (typical), 140mA (max).

Additional Expander Module with 32 zones on BUS for LightSYS and ProSYS/ProSYS Plus RISCO control panels. Grade 3 Certified. Each BUS Zone Expander creates a separate BUS branch. Each Expander can be configured to support 8, 16, 24 or 32 detectors on the BUS. The BUS branch increases the overall security of the system in the event that a certain BUS detector is sabotaged. It has the function of isolator and concentrator. Risco BUS detectors allow remote adjustment.

1-zone wired expander BUS module for LightSYS™ and ProSYS™ / ProSYS™ Plus main panels. 1 zone miniature module to connect detectors in BUS. The detector relay can be assigned to any zone number. Reduced size allowing installation in the detector. Dimensions: 11 x 38 mm. Connection to BUS. Max. distance: 300m. Consumption: 20mA (typical).

Z-Wave smart universal on / off plug. Manufacturer: Fibaro FGD-212. Wireless dimming of lights. Up to 2.5 kW of power. Power supply: 100 V - 240 V.

Z-Wave intelligent universal dimmer on / off. Manufacturer: Fibaro FGD-212. Wireless dimming of lights. Up to 2.5 kW of power. Power supply: 100 V - 240 V.

Z-Wave smart plug with "F" connection type. White color. Colored LED for display of consumption. Power supply: 110-230 V. Maximum power: 2500W. Manufacturer: Fibaro FGWPF-102.

Z-Wave smart plug with "F" connection type. White color. Power supply: 110-230 V. Maximum power: 3000W. Manufacturer: TKB TZ68G.

Z-Wave garage shutter/door controller. Manufacturer: Philio PAN08. Full and partial up/down function. Power: 90 ~ 240VAC Maximum load: 1100W Overload protection. Self-calibration Repeater

Z-Wave dimmer smart plug with "F" connection type. White color. Wireless regulation of lights. Power supply: 110-230 V. Maximum power: 300W (Only for incandescent lamps). Manufacturer: TKB TZ67G.

Pluggable 4G communication module for WiComm Pro control panel. Grade 2. Supports multi-channel communications. Includes antenna for mounting in plastic box. Easy to install, it connects directly to the control panel board. Allows communication through 4G / GSM networks for transmission of events to CRA and with connection to the cloud. Allows remote access to the panel through the configuration software. It can be used as primary communication or as a backup for IP or PSTN communications.

Multi-Socket Pluggable 4G GSM Module for Grade 2 Polycarbonate Case for Agility (from version 5.62); LightSYS (from version 6.05) and ProSYS Plus™ (from version 1.4.3). The 4G Communication Module is a plug-in module, enabling RISCO Control Panels to communicate via 4G/3G/2G networks for reporting, control and remote programming. It can be used as the primary communication or as backup for the IP and Wi-Fi communication module. The module supports the SIA/IP, SIA and Contact ID reporting formats. The 4G Communication Module is compatible with LightSYS, ProSYS Plus, Agility and WiComm Pro and is supplied with an antenna. A 3-meter antenna extension can be ordered separately. The 4G Communication Module is also compatible with the COB (Cellular on Bus). With the COB, the 4G Communication Module can be installed along the system bus of a LightSYS or ProSYS Plus alarm system and thus, be placed up to 300 meters away from the control panel. The Multi-Socket 4G Communication Module supports parallel notification and reporting of events to RISCO Cloud, Monitoring Stations and Follow Me destinations (via email and/or SMS). Voice reports can be executed only if the fallback option to 2G or 3G is supported by the network provider. The 4G Communication Module also supports remote access to the panel using CS for configuration and diagnostics.

3G GSM Multi-Socket module + antenna for ProSYS™ Plus or LightSYS™ version 5.2x or higher. EN50131 Grade 2 certificate. GSM / GPRS module 3G Multi-Socket plus antenna for mounting in metallic box. Communication with CRA through the cloud or "Software IP Receiver" of RISCO™ (SIA, Contact ID). Users can receive system messages, SMS, voice messages and emails. Supports remote programming of the panel using the "Configuration Software". Plug in plate.

Multi-Socket TCP / IP module for Agility™ (from version 4.xx), LightSYS™ (from version 5.xx) and ProSYS™ Plus. EN50131 GRADE 3 certificate. Communication through a TCP / IP network. Multi-Socket. Communication with CRA through the cloud or "Software IP Receiver" of RISCO™ (SIA, Contact ID ...). It allows sending emails to end users containing alarm notices. Supports remote programming of the panel using the "Configuration Software". Plug-in connection to board directly.

GSM 4G Multi-Socket module for Grade 3 metal box for LightSYS (from version 6.05) and ProSYS Plus ™ (from version 1.4.3). The 4G communication module is a plug-in module that allows RISCO control panels to communicate over 4G / 3G / 2G networks for reporting, remote control and programming. It can be used for main communication or as a backup for the IP and WiFi communication module. The module supports SIA / IP, SIA, and Contact ID report formats. The 4G communication module is compatible with LightSYS, ProSYS Plus, Agility and WiComm Pro and is supplied with an antenna. A 3 meter antenna extension can be ordered separately. The 4G communication module is also compatible with the COB (Cellular on Bus) module. With the COB, the 4G Communication Module can be installed via the system bus of a LightSYS or ProSYS Plus panel and therefore can be placed up to 300 meters away from the control panel. The Multi-Socket 4G communication module supports notifications and parallel reports of events to RISCO Cloud, alarm receiving centers and private numbers (by email and / or SMS). The 4G communication module also supports remote access to the panel via the CS for configuration and diagnostics.

GSM 4G pluggable Multi-Socket Grade 3 module for LightSYS+.

Wireless repeater for RISCO bidirectional accessory. 868 MHz. 2 ways. Range 300m. Up to 4 repeaters per alarm center. Power supply and rechargeable backup battery (included). Up to 32 bidirectional detectors (8 photodetectors). 3 sirens, 3 keyboards, 16 remote controls (8 on WiComm Pro) and 1 I / O module per repeater. Functional remote controls on all repeaters.

Digital voice module (multilingual: multi-language support) for LightSYS™ and ProSYS™ Plus main panels. Provides audible information about the state of the system. Full-Duplex communications from any phone. Allows any remote touch-tone telephone (DTMF) to serve as the system's keypad. Connection to BUS. Grade 3.

External antenna for installing the Wifi module in a metal box.

2G/3G/4G antenna with 3m cable.

Additional external antenna with 3m cable for GSM/GPRS module for LightSYS+ control panels.

Allows the connection for up to 232 Z-Wave devices. It communicates with the Risco cloud through an Ethernet connection. It incorporates a Z-Wave controller in one of its USB ports. It works on Linux. It contains an SD card with the operating system and settings. Includes 220 Vac power supply. Dimensions: 55 x 55 x 106 mm.

Kit del Marco de Empotrar para Teclado Elegant.

Recessed frame kit for the wireless Panda keyboard.

13.56 MHz Proximity reader. Only PCB, does not include housing. The proximity reader allows you to connect and disconnect the system without using the keypad. The same reader supports multiple partitions. Up to 16 proximity readers according to system.