Two-channel, ultra-high resolution Feedback suppressor with built-in parametric equalizer. With 24-bit A/D and D/A converters and 64/128 times over-sampling, it has 24 fully programmable parametric filters that can be set manually or via MIDI. Each filter provides single-shot, auto and manual modes. In manual mode the unit allows setting 2x12 parametric filters, including frequency, bandwidth and gain. Its 24-bit ultra high performance DSP processor guarantees signal's resolution and dynamic range, automatically searching and destroying up to 12 frequencies per channel.

Mixer Preamplifier for flush mounting with 2 balanced microphone signal inputs and 2 aux signal inputs. Microphone inputs with phantom power selection. Balanced output of 0 dB, 600 ohms. Power supply 230 V AC, 24 V DC or Phantom. Dimensions: 173 x 132 x 61.25 mm.

Mixer Preamplifier for wall mounting with 2 balanced microphone signal inputs and 2 aux signal inputs. Microphone inputs with phantom power selection. Balanced output of 0 dB, 600 ohms. Power supply 230 V AC, 24 V DC or Phantom. Dimensions: 173 x 132 x 61.25 mm.

Priority paging card with 2 inputs of 0 dB sensitivity and 1 output with adjustable level between + 2 dB and - 73 dB. Both the inputs and the output can be balanced using transformers T-700 . The output switches from one input to another when priority is activated.

MP3 messages player card with capacity up to 127 messages of different lenght. Recording capacity depends on MMC used memory (1 min / Mb approx.). Evacuation messages (up to 16) and for general purpose. Repetition intervals between messages (endless, or 0 to 63 s). Remote activation or via the front panel. Adjustable audio output. Additional amplified audio output for supervision with confirmation function. It includes 512 MB MMC. Weight: 440 g.

Universal preamplifier card to insert into the PM main frame. Programmable input sensitivity (MICRO, AUX AUX H and L). It has bass and treble controls, with removable buttons. Audio signal can be assigned to program output or to priority output from PM preamplifier. It includes an independent output which allows addressing the audio signal to another preamplifier or power unit. Frontal LED to indicate priority control activation. RJ45 inputs / output connectors.

Universal preamplifier card to insert into the PM main frame. Programmable input sensitivity (MICRO, AUX AUX H and L). It has bass and treble controls, with removable buttons. Audio signal can be assigned to program output or to priority output from PM preamplifier. It includes an independent output which allows addressing the audio signal to another preamplifier or power unit. Frontal LED to indicate priority control activation. DIN input connector and RJ45 output connector. Weight: 380 g.

Modular Mainframe with capacity for up to 12 electronic cards (preamplifier with adjustable sensitivity, prerecorded messages, telephone messages, automatic level control ...) and with 2 internal audio 0 dB channels: a priority one, for pagings, and a program one, for music sources. Linkable with other mainframes. Power supply 24 V DC.

The 2N SIP Speaker is an IP paging device with many useful functions. It can be used at the workplace, in schools, offices and other public spaces. You can use it with a loudspeaker as a simple PA system or with a microphone as a two-way intercom. The link between IP technology and an SIP protocol enables announcements to be sent to all the devices in the system, to select individual zones or call a specific device. With an external microphone and button, an end station can call up to three pre-selected numbers. It is then possible to control one external switch from these workplaces with any function based on the needs of the given operation. – Standalone Box Bundle (includes Speaker and Mic).

Interconnect the radio switchboard with the telephone system and use it for announcements through your telephone. 2N® SIP Audio Converter converts the sound of SIP telephone systems in the traditional analog form. Thanks to this, it will allow you to broadcast live announcements, or pre-configured announcements, over the IP network at any distance. Communicator both ways. Multicast transmission Built-in relay

1 x RJ-45 Ethernet interface 10/100 Full duplex, 2 x SUB-D9 RS-232 interface (5 wires), 1x Euroblock 12 cts Interface 10 configurable GPIO I / O, 1 x Euroblock 6 cts Interface 2 x IR + 1 x RS-485 (Half-Duplex), 1 x miniUSB (A / B) Configuration interface + 5V DC 500mA power supply. Power supply and USB cable included. Color RAL 9005, Dimensions in mm (height x width x depth): 21.3 x 139 x 62 mm.

The EST-ISLE is both a communication module that allows integration with external systems through the RS485 protocol, and an audio signal splitter. Address Settings - Number of addresses in the range 0-F (16 addresses). Local audio input - 4 input channels on the 8-pin connector. For easier and faster connection of audio sources, Phoenix type connectors can be used. The LOCAL AUDIO IN connector (Phoenix 8-pin connector) is bridged to local audio output (RJ-45). Uput Amplifiers - RJ-45 connector for the 4-channel amplifier. Local AUDIO OUT - RJ-45 connector for input signals to the system.

DTMF phone interface to access public address systems from any line or analog extension of telephone system. The audio output is configurable (-60, -20, 0, and +4 dB). Incorporates security paging relay, priority contact associated with the audio output and audio input level contro. Allows configuration of the ringtones before answering, password, hung tone detection time, communication time and activation of the noise gate. 230 V AC, consumption 20 mA. Weight 1.6 kg. Dimensions 213 x 44 x 235 mm. Finished in iron black RAL 9005, with black skinplate.

OPTIMUS expands the SIP compatibility options of its public address equipment with the IA-10SIP model, a SIP interface to analog audio that allows audio to be transmitted from any SIP device to an analog public address equipment: amplifier, preamplifier, power stage ... The equipment is configured from a web server and is powered by PoE or by a 5 V DC source. It has several audio outputs, one direct to an 8 ohm speaker and 2 W of power, and two to connect the public address equipment, one with AUX level (0 dB) and the other with MIC level (-60 dB). The equipment also provides a signal to activate the priority (open collector activated in connection) and a remote control (relay) activated by DMTF from the SIP equipment. This interface is a family with the IA-20SIP model, which adds to the IA-10SIP features the possibility of connecting a microphone or analog sound source and converting it to SIP. It is a device that allows, therefore, standard intercom or public address functions using the SIP telephony network.

IP/SIP PAS audio Interface for PA system and intercom. Parameters configuration through WEB server. 5 Vdc or PoE Power supply. Audio Outputs 8ohms, 2W, AUX level (0 dB) and MIC level (-60 db). Audio input AUX level (0 dB) or MIC level (-60dB). Contact Input for call (intercom) or priority (PAS). Output relay contact activated by DMTF tone. Open-collector output contact activated with activated call.

Allows you to send email notifications about SIME CONTROL and SIME CALENDAR. Requires internet connection on the server and use of external SNMP server. Delivery time 3 weeks

System control and supervision system through Ethernet networks for voice evacuation functionalities. The system allows monitoring of the message and zone that is being activated at all times during an evacuation / alert process through the color coding of the zone button. The notification menu is included at the bottom of the interface through a dropdown. Completely independent VAP system for emergency management (redundancy of emergency operating position). It allows the emergency management of multiple NEO islands through ethernet communication, as well as supervision through direct monitoring of NEO equipment.

System control and supervision software through ethernet networks for the NEO system. Quick and easy installation, no configuration required. It allows central control of the system, includes volume and routing management, a prerecorded message playback module, emergency management and system profiles. It allows to include the installation plan. Single-seat license.

Includes Verbo playback engine in Spanish language. Other languages can be purchased separately. Allows you to select zones and manage messages directly from SIME™.

AG Automatic Gain Control Module for SIME™. Requires probe microphones.

It includes calendar module for programming of events in the local system, and within their corresponding zones. Programming can be done by day, weeks or months.

CAG Automatic Gain Control Module for SIME™. Requires probe microphones.

Unlimited areas. Control system and system supervision through Ethernet networks. Multiplatform access (PC, linux, iPad, etc). Based on webservices, does not require client license installation. It allows controlling the system in a centralized manner, including volume and routing management, pre-recorded message reproduction module, emergency management and system profiles. Includes 4 user accounts (1 administrator account, 1 monitoring account and 2 operator accounts).

App (Android and iOS) to manage COMPACT and OPTIMAX2 systems.