English
Español
  • Search
    • +34 902930427

    0.00 €

    Public audio

    Products 701
    TOA™ RC-001T Remote Control Module [Y4770M]
    TOA™ RC-001T Remote Control Module
    Ref.: Y4770M
    Interface module to connect between the 9000M2 Series amplifier and the ZM-9011, ZM-9012, ZM-9013, or ZM-9014 Remote control panel of data communication type. Up to 16 remote control panels can be connected to the RC-001T. Weight: 110 g. Dimensions: 440 x 550 x 205 mm.
    V.A.T. included
    Consult
    TOA™ AN-9001 Ambient Noise Sensing Microphone [Y4770H]
    TOA™ AN-9001 Ambient Noise Sensing Microphone
    Ref.: Y4770H
    Electret condenser microphone designed for ambient noise detection. It is used in conjunction with the AN-001T Ambient Noise Sensor Input module in the 9000 Series system. It can be mounted in a 1-gang electrical box in the ceiling or wall. Weight: 340 g. Dimensions: 160 x 170 x 60 mm.
    V.A.T. included
    Consult
    TOA™ C-001T Input/Output Control Module [Y4770F]
    TOA™ C-001T Input/Output Control Module
    Ref.: Y4770F
    Control I/O expansion module designed for use with the 9000 Series amplifiers and can provide up to 8 channels each of input and output expansion. Since the main unit has 4 preinstalled inputs and outputs each, the control input and output can be expanded to up to 12 channels each when the C-001T is used. Weight: 100 g. Dimensions: 440 x 550 x 205 mm.
    V.A.T. included
    Consult
    TOA™ ZP-001T Telephone Zone Paging Module [Y4770E]
    TOA™ ZP-001T Telephone Zone Paging Module
    Ref.: Y4770E
    Zone paging module designed for use with the 9000 Series amplifiers and functions as interface to connect the 9000 Series amplifier to an analog PABX, allowing zone paging to be initiated from the PABX. There are two operation modes: ring signal and paging port modes. Broadcast can be initiated regardless of operation mode. Weight: 100 g. Dimensions: 440 x 550 x 205 mm.
    V.A.T. included
    Consult
    TOA™ AN-001T Ambient Noise Controller Module [Y4770D]
    TOA™ AN-001T Ambient Noise Controller Module
    Ref.: Y4770D
    Plug-in module of 2-channel ambient noise detector designed for use with the 9000 series amplifiers. It automatically adjusts the output volume in response to the change of ambient noise level. The AN-001T can handle input signals from microphone level (-60 dB) to line level (-10 dB) by controlling the gain in 9 steps. Phantom power (+24 V) can be supplied for condenser microphone use. Weight: 90 g. Dimensions: 88 x 105 x 40 mm.
    V.A.T. included
    Consult
    TOA™ T-001T Dual Line Output Expansion Module [Y4770C]
    TOA™ T-001T Dual Line Output Expansion Module
    Ref.: Y4770C
    T-001T is a plug-in module designed for use with the 9000 Series amplifiers and can provide two independent balanced outputs. It can drive load of 600 ? up to +16 dB. It can process effect for TONE/EQ/COMPRESSOR to two outputs independently. Weight: 8,4 kg. Dimensions: 550 x 440 x 205.
    V.A.T. included
    Consult
    TOA™ D-001R Line Input Module [Y4770B]
    TOA™ D-001R Line Input Module
    Ref.: Y4770B
    Line input plug-in module designed for use with the 9000 Series amplifiers. It has 2-channel unbalanced inputs of RCA jacks. Input signals to both channels are mixed together. The D-001R can process effect for TONE/EQ/COMPRESSOR to two inputs independently. Input Sensitivity: -60 to -10 dB. Weight: 120 g. Dimensions: 440 x 550 x 205 mm.
    V.A.T. included
    Consult
    TOA™ D-001T Plug-in Module [Y4770A]
    TOA™ D-001T Plug-in Module
    Ref.: Y4770A
    Plug-in module designed for use with the 9000 Series amplifiers and can provide two independent balanced inputs. The D-001T can handle signals ranging from microphone level to line level by controlling their input sensitivity in 9 increments from -60 dB to -10 dB. Phantom power (+24 V) can be supplied for condenser microphone use. The D-001T can process effect for TONE/EQ/COMPRESSOR to two inputs independently. Weight: 120 g. Dimensions: 550 x 440 x 205 mm.
    V.A.T. included
    Consult
    TOA™ M-9000M2 Series Pre-Amplifier [Y4770]
    TOA™ M-9000M2 Series Pre-Amplifier
    Ref.: Y4770
    Pre-Amplifier is designed to be used in conjunction with optional modules and can be configured for up to 8 inputs and 8 outputs. 9000 series modules as well as existing 900 series input modules can be used. The most appropriate modules can be selected depending on applications. It is equipped with signal processing and control functions necessary for sound reinforcement, permitting all parameters to be set at the mixer. Settings data can be stored inside the unit and called up using the keys on the front panel. Dimensions: 420 mm x 107,6 mm x 353,2 mm. Finish: black aluminium and steel. Weight: 6 kg.
    V.A.T. included
    Consult
    TOA™ RM-320F Fireman"s Microphone Extension [Y4984ME]
    TOA™ RM-320F Fireman"s Microphone Extension
    Ref.: Y4984ME
    Extension unit for increasing the number of function keys of TOA's Remote Microphones. Dimensions: 175 x 215 x 70 mm. Weight: 1,35 kg.
    V.A.T. included
    Consult
    TOA™ RM-300MF Fireman"s Microphone [Y4984M]
    TOA™ RM-300MF Fireman"s Microphone
    Ref.: Y4984M
    Fireman's Microphone is designed for exclusive use with the VM-3000 Series. It is equipped with an emergency activation key, permitting pre-recorded evacuation and alert announcements to be activated, and microphone announcement to be made in emergency situations. By connecting the RM-320F Fireman's Microphone Extension to the RM-300MF, the number of function keys can be expanded. The zone selection or failure acknowledgment function can be assigned to such function keys. According to: EN-60849. Dimensions: 200 x 215 x 82,5 mm. Weight: 1,8 kg.
    V.A.T. included
    Consult
    TOA™ VM-3240E Extension Amplifier [Y4982E2]
    TOA™ VM-3240E Extension Amplifier
    Ref.: Y4982E2
    Multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with the speaker output section which has an internal attenuator and 6-output selector. In addition, the unit features the surveillance function which automatically checks the system for failures. According to: EN-60849 and EN54. Dimensions: 482 x 132,6 x 407 mm (3 u rack). Weight: 16,5 kg.
    V.A.T. included
    Consult
    TOA™ VM-3360E Extension Amplifier [Y4982E3]
    TOA™ VM-3360E Extension Amplifier
    Ref.: Y4982E3
    Multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with the speaker output section which has an internal attenuator and 6-output selector. In addition, the unit features the surveillance function which automatically checks the system for failures. According to: EN-60849 and EN54. Dimensions: 482 x 132,6 x 407 mm (3 u rack). Weight: 19 kg.
    V.A.T. included
    Consult
    TOA™ VM-3240VA Voice Alarm System Amplifier [Y4980A2]
    TOA™ VM-3240VA Voice Alarm System Amplifier
    Ref.: Y4980A2
    Multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with audio inputs including the background music input, and the speaker output section which has an internal attenuator and 6-output selector. It permits not only general-purpose broadcast, but also Emergency broadcast based on the EN60849 Standard which gives pre-recorded voice instructions in the emergency situation. Emergency broadcast can be made from an optional RM-300MF Fireman's Microphone as well as from the amplifier, and can be remotely controlled from external equipment. In addition, the unit features the surveillance function which automatically checks the system for failures. Dimensions: 482 x 132,6 x 431,2 mm (3 u rack). Weight: 16,5 kg.
    V.A.T. included
    Consult
    TOA™ VM-3360VA Voice Alarm System Amplifier [Y4980A3]
    TOA™ VM-3360VA Voice Alarm System Amplifier
    Ref.: Y4980A3
    Multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with audio inputs including the background music input, and the speaker output section which has an internal attenuator and 6-output selector. It permits not only general-purpose broadcast, but also Emergency broadcast based on the EN60849 Standard which gives pre-recorded voice instructions in the emergency situation. Emergency broadcast can be made from an optional RM-300MF Fireman's Microphone as well as from the amplifier, and can be remotely controlled from external equipment. In addition, the unit features the surveillance function which automatically checks the system for failures. Dimensions: 482 x 132,6 x 431,2 mm. Weight: 19 kg.
    V.A.T. included
    Consult
    LDA® LOOP Expansion Module up to 10 units [LDAONELOOP10S01]
    LDA® LOOP Expansion Module up to 10 units
    Ref.: LDAONELOOP10S01
    Loop expansion module and license for ONE systems expandable up to 4 units. 1 unit required for equipment configured as master in ONE expandable system. Up to 60 zones. RS-485 communication Dimensions 120 x 100 x 80 mm
    V.A.T. included
    2,078.96 €
    LDA® LOOP Expansion Module up to 4 units [LDAONELOOP04S01]
    LDA® LOOP Expansion Module up to 4 units
    Ref.: LDAONELOOP04S01
    Loop expansion module and license for ONE systems expandable up to 4 units. 1 unit required for equipment configured as master in ONE expandable system. Up to 24 zones. RS-485 communication Dimensions 120 x 100 x 80 mm
    V.A.T. included
    1,294.93 €
    19'' Rack Mount for LDA® ONE-500 [LDAONERMA2S01]
    19'' Rack Mount for LDA® ONE-500
    Ref.: LDAONERMA2S01
    The ONE-RMA2 bracket allows you to install a ONE-500 unit in a 19'' rack cabinet. At just 2U tall (with ONE-500 installed) it provides a solid mounting base for your gear.
    V.A.T. included
    52.59 €
    LDA® ONE-500 Wall Mount Bracket [LDAONEWMAS01]
    LDA® ONE-500 Wall Mount Bracket
    Ref.: LDAONEWMAS01
    The ONE-WMA bracket allows you to install a ONE-500 unit on the wall. Manufactured from 1.5mm galvanized sheet metal, it provides a solid fixing base for the equipment with only 5mm depth. Once the ONE-500 unit is fixed, the bracket is completely hidden. The ONE-WMA bracket has four holes for wall mounting, and two fixings for the ONE-500 unit.
    V.A.T. included
    155.13 €
    LDA® Activation Card for EN54-4 Battery Charger [LDAONEBC1S01]
    LDA® Activation Card for EN54-4 Battery Charger
    Ref.: LDAONEBC1S01
    EN 54-4 Battery Charger Upgrade and Activation Card for ONE-500. Once activated, the card becomes a key for the charger to work permanently.
    V.A.T. included
    500.60 €
    LDA® TFL-2 Line Terminator [LDATFL2S01]
    LDA® TFL-2 Line Terminator
    Ref.: LDATFL2S01
    Filtered load impedance for improvement of loudspeaker line measurement accuracy on 70 / 100V lines. It allows to add precision to the connection integrity check between the speakers and the PA / VA system. It is a small device very easy to install and with a very low consumption. Multiple devices can be connected to the same line of speakers. Does not require return lines to the system.
    V.A.T. included
    128.89 €
    LDA® VAP-1 Blind Extension Module [LDAVAP1ECS01]
    LDA® VAP-1 Blind Extension Module
    Ref.: LDAVAP1ECS01
    Controller for 10 dimmer lines with remote control signal input for each line, 1 sub-D15 type control input, 1 RJ-45 type ethernet control input, 1 general dimmer activation input with loop-throw-output EUR type.
    V.A.T. included
    102.43 €
    LDA® ONE-500 Compact Public Address and Evacuation System [LDAONE500S01]
    LDA® ONE-500 Compact Public Address and Evacuation System
    Ref.: LDAONE500S01
    The EN 54-16 certified LDA ONE500 public address and voice alarm system ensures fast, safe and controlled emergency evacuation. ONE is the most versatile and cost effective voice and public address alarm system thanks to its innovative features, excellent audio quality and flexibility in the smallest space. It has 2 class D amplifiers, 6 zones, 3 audio inputs, 6x6 audio matrix, DSP and LCD display. The system can be configured without the need for software or a PC, thanks to its Plug & Set configuration mode for PA and VA. The audio and automatic mixing inputs provide great versatility for PA use in small installations. It incorporates EN 54-4 battery charger and works with a single 12V battery, minimizing the cost of system maintenance thanks to its advanced energy-saving control. The innovative Wall & Rack design allows for autonomous wall mounting or rack mounting.
    V.A.T. included
    3,231.22 €
    LDA® Communications and Power Adapter for VCC-64 [LDAVCC64PSKS01]
    LDA® Communications and Power Adapter for VCC-64
    Ref.: LDAVCC64PSKS01
    The VCC-64 PSK Communications and Power Adapter enables the installation of LDA VCC-64 devices in the system, using a single CAT5 cable for the entire device bus. The equipment has an input for continuous power supply with a nominal voltage of 12V. It consists of a two-pole + and - female power jack connector that will be connected to the positive and negative poles of the power supply supplied with the equipment. The connection is made using a male power jack connector with an internal diameter of 2.1 mm, an external diameter of 5.5 mm and a length of 9.5 mm.
    V.A.T. included
    331.46 €
    SYSAWAY© 2024 All rights reserved