MIFARE ™ card reader - 13.56 Mhz. ABS. Wiegand output 26 bits. The ISO 14443 card readers are designed to read from contactless smart cards. They are compatible, very safe and elegant.

Mounting kit (back side) for 40/40K readers. Black (for Signo™ readers).

Contactless Smart Card Reader, Wall Switch. Mobile Credentials powered by Seos® (HID® Mobile Access). SEOS™, iCLASS™ SE®, iCLASS™ SR®, iCLASS®, MIFARE™ Classic (SIO™, CSN/UID and Custom Data), MIFARE™ DESFire™ EV1/EV2/EV3 (SIO™, CSN/UID and Custom Data), FeliCa™ Idm and CEPAS™ (SIO™ and CSN/UID). Includes support for 125 kHz credentials such as HID Prox™ or Indala™. Suited for mullion-mount door installations or any flat surface mounting. Dimensions: 45 x 121.5 x 19.5 mm. Operating Temperature & Humidity: -35° C to +66° C. 0% to 95% non-condensing. UL294 Outdoor and Indoor rated, IP65. Interfaces: Wiegand and RS-485 Half Duplex (OSDP). EAL 6+ Certified Secure Element Hardware.

The AC-10F is a stand alone flush mount access keypad. The unit is constructed of cast zinc and will hold up to 100 codes for access. The AC-10F provides two dry contacts for door release or mag lock activation.

The AC-10S is a stand alone access keypad. It is designed to match the look of Aiphone's JK-DV, JF-DV or MK-DV door stations. The unit is constructed of cast zinc and will hold up to 100 codes for access. The AC-10S provides two dry contacts for door release or mag lock activation.

Reader that allows the door to be opened when a multi-frequency proximity card or key fob (EM (125KHz), MIFARE (13.56MHz) and HID (125KHz, ISOProxII) is approached. Only authorized cards or key fobs will operate the device. No need a physical contact Acoustic confirmation of acceptance or rejection of the card or key ring presented Access control module, to be incorporated in SKYLINE and CITYLINE door entry / video entry panels Recommended for indoor and outdoor Readers are Wiegand 26, allowing to equip to the access control installation of an anti-sabotage security, by not incorporating the door opening mechanism or the exit button connection. These functions are supported by the door controller that uses the Wiegand 26 protocol and therefore are left out of the scope of manipulations The door controller will be installed inside (safe area) and the reader outside.Autonomous configuration: Capacity of up to 1,000 user cards or key chains. It requires a door controller (ref. 5276) for its connection and operation. 12Vdc supply.

Reader that allows the door to be opened by bringing a proximity card or key fob closer. Only authorized cards or key fobs will power the device. No physical contact is necessary. Proximity reader that through a dipswitches configuration (SW2) that it incorporates can work in an autonomous or centralized system. Configuration as AUTONOMOUS: (1) Capacity of up to 400 user cards or key fobs. (2) Reader and controller integrated in the same module. It allows configuration as CENTRALIZED MDS-AC Plus and configuration as CENTRALIZED with Wiegand 26 protocol or Data / Clock.

Access control module, to be incorporated into door entry / video entry panels. Telephone-type keypad that allows the door to be opened by entering a previously programmed code of up to 6 digits. Aluminum color. Autonomous access control system. For installations where simple access control is required, without incident logging, to complement the electronic door entry system and allow neighbors access to the building, for example: offices, small offices, garages. Up to 100 user codes.

Reader that allows the door to be opened by bringing a proximity card or key fob closer. Only authorized cards or key fobs will power the device. No physical contact is necessary. Proximity reader that through a dipswitches configuration (SW2) that it incorporates can work in an autonomous or centralized system. Configuration as AUTONOMOUS: (1) Capacity of up to 400 user cards or key fobs. (2) Reader and controller integrated in the same module. It allows configuration as CENTRALIZED MDS-AC Plus and configuration as CENTRALIZED with Wiegand 26 protocol or Data / Clock.

Telephone-type keypad that allows the door to be opened by entering a previously programmed code of up to 6 digits. Aluminum color. Autonomous access control system. For installations where simple access control is required, without incident logging, to complement the electronic door entry system and allow neighbors access to the building, for example: offices, small offices, garages. Up to 100 user codes (Code length from 4 to 6 digits).

Reader that allows the door to be opened when a multi-frequency proximity card or key fob (EM (125KHz), MIFARE (13.56MHz) and HID (125KHz, ISOProxII) is brought in. Only authorized cards or key fobs will operate the device. No need a physical contact Acoustic confirmation of the acceptance or rejection of the card or keyfob presented Recommended for interiors and exteriors The readers are Wiegand 26, allowing the access control installation to be provided with anti-sabotage security, by not incorporating the door opening mechanism or exit button connection. These functions are supported by the door controller that uses the Wiegand 26 protocol and therefore are out of the reach of manipulations. The door controller will be installed indoors (safe area) and the reader in the exterior Configuration as AUTONOMOUS: (1) Capacity of up to 1,000 cards or user keyfobs. (2) Requires door controller (ref. 5276) for its connection and operation. (3) 12Vdc power.

Reader that allows the door to be opened by bringing a proximity card or key fob closer. Only authorized cards or key fobs will power the device. No physical contact is necessary. Proximity reader that through a dipswitches configuration (SW2) that it incorporates can work in an autonomous or centralized system. Capacity of up to 400 user cards or key fobs. Reader and controller integrated in the same module.

Anti-vandalism proximity reader, narrow profile and small dimensions. It allows to work in autonomous or centralized mode, depending on the Wiegand 26 controller to which it is connected. Maximum capacity of up to 1,000 users. IP66.

Vandal resistant keypad with integrated proximity, narrow profile and small dimensions. It allows to work in autonomous or centralized mode. Maximum capacity of up to 600 users. The keypad has a door sensor input (can be enabled or disabled). If activated and the door is opened without prior authorization, an alarm will be triggered until a valid identifier is presented and the door is closed. It will also trigger an alarm if the door remains open for more than 1 minute after valid access. The keypad is supplied with two master cards that allow registering or canceling cards or key chains, not codes. The codes are registered through the keypad itself. Centralized mode: Wiegand 26 / 8bits. IP66.

The MEMOKEY RESISTANT KIT, for autonomous vandal-proof access control by keypad and proximity, allows the management of up to 600 users. It includes an IP66 / IK9 keypad with a slimline, slim profile integrated controller (ref. 5293), 3 proximity cards (ref. 52750), 2 key fobs (ref. 52740) and a 12VAC / 1A power supply (ref. 4802). The access code is entered by dialing 4-6 digits + #. Multi-card / PIN type access requires several identifiers. For example, if it is programmed with 3 identifiers, in order to activate the door, the user will present their valid card and until the two additional cards are passed (example of the guards), the door will not open. The kit can be expanded with a second keypad (ref. 5293) or with a proximity reader WG26 (ref. 5296), adding an additional 12Vdc source (ref. 4813): (1) The keypad can work as INTERLOCK (opening one door with automatic locking of another). (2) The reader (ref.5296) will act on the same door.

The RESISTANT PROXIMITY KIT includes a vandal-proof proximity reader, with a narrow profile and small dimensions, allowing it to be installed on narrow profile doors. It allows managing up to 1,000 users thanks to the MINI autonomous external controller (ref. 5276). This controller includes two MASTERS cards (HIGH / LOW) and an infrared IR keypad for card and parameter programming, 3 proximity cards (ref. 52750), 2 key fobs (ref. 52740) and a 12Vac / 1A power supply (ref. 4802). The controller allows up to 2 different types of access when installing a proximity reader. Card only; Multi-card. By presenting 2 to 9 valid cards, the door will open. Multi-card type access requires several identifiers. For example, if it is programmed with 3 identifiers, in order to activate the door, the user will present their valid card and until the two additional cards are passed (example of the guards), the door will not open.

Access control equipment with memokey keypad. Indicated for offices, offices, garages ... It allows the opening of a door or access from the keypad by entering a PIN code. Supports up to 100 different users / codes. It allows activating another device from the keypad: 2nd door, alarm, lights, etc ... Includes: Cityline memokey reader, Ref. 6991. Power supply, Ref. 4800.

Access control equipment that allows entry to an area only to people who have a personal card enabled. To open the door, just bring the card closer to the reader. For applications in offices, offices, warehouses, single-family homes, buildings, etc. The system allows up to 400 different cards, each with a unique and unrepeatable code. Includes: 6992 - Proximity Reader. 4515 - Proximity keyfob. 23361 - Proximity Card with magnetic stripe (5 units). 4802 - PSU.

Telephone-type keypad that allows the door to be opened by entering a previously programmed code of up to 6 digits. Autonomous access control system. For installations where simple access control is required, without incident logging, to complement the electronic door entry system and allow neighbors access to the building, for example: offices, small offices, garages. Autonomous Power: 12 Vac / Vdc. Up to 100 user codes (Code length from 4 to 6 digits).

Fingerprint reader with keypad for autonomous surface mounting that includes buzzer and three-color LED to indicate the status (access granted, access denied or inactive). Up to 100 users, plus 1 as administrator and another installer. Compatible with reader, keypad or biometric slave, via RS485 connection. Exit request push button input. Embellisher not included. NO / NC relay output. Power supply 9 to 14 VDC. Protection: IP65. Compatible with ACL800FL-RU2-W module. Dimensions: 100x94x30mm. Silver color.

Independent digital keypad for access control applications with backlit keys, with 99 user codes, 2 output relays and 1 output request push button input. This black surface mount keypad. Authorized users can be assigned specific codes for use in access control, electrical switching and arming / disarming alarm systems. It supports configuration so that the user can activate output 1 or output 2 or both outputs. In case of wrong code the system will remain locked for 30 seconds. Dimensions: 80x80x9mm. Weight 70 gr. Power 9 to 14 VDC. Does not include trim.

Independent digital keypad for access control applications with backlit keys, with 99 user codes, 2 output relays and 1 output request push button input. This recessed mounting keypad is designed to fit a DIN electrical back box and is available in three different finishes. Authorized users can be assigned specific codes for use in access control, electrical switching and arming / disarming alarm systems. It supports configuration so that the user can activate output 1 or output 2 or both outputs. In case of wrong code the system will remain locked for 30 seconds. Dimensions: 80x80x9mm. Weight 70 gr. Power 9 to 14 VDC. Does not include trim.

Fingerprint and proximity reader protocol Mifare 13.56 Mhz, supports Mifare Classic, DESFire, EV1, EV2, Plus, Ultralight. Number of bytes CSN Mifare 4S50 and 7S70. Type: ISO14443A. for autonomous surface mounting that includes buzzer and three-color led to indicate status (access granted, access denied or inactive). Up to 100 users, plus 1 as administrator and another installer. Compatible with reader, keypad or biometric slave, via RS485 connection. Exit request push button input. Embellisher not included. NO / NC relay output. Power supply 9 to 14 VDC. Protection: IP65. Compatible with ACL800FL-RU2-W module. Dimensions: 100x94x30mm. Color: Black.

Aluminum keypad for autonomous surface mounting, for 99 users, with backlit metal keypad, status leds, buzzer, tamper protection, 30mA standby and 100mA consumption, relay output 2A and 1 250mA transistor, includes wiring 1 meter in length , installation for outdoor IP65, power supply 9-14V DC, temperature range -20ºC to + 50ºC. Dimensions 92 x 51 x 25 mm. Silver color.