Gate with passage obstacle in clear toughened glass. Motorized opening in both directions (BIDIRECTIONAL). The obstacle is mechanically locked in its closed position. 900 mm passage width (high: 900 mm, consult options up to 1200 mm). AISI 304 stainless steel panels. Dimensions: 1115 x 215 x 1030 mm. Easy access to users with reduced mobility

Emergency battery set for GUNNEBO® motor-driven aisles of the FP series.

Emergency battery set for GUNNEBO® motor-driven aisles of the FP series.

Standard machining under methacrylate of maximum 110 x 110 mm. Needed 2 per step (readers not included).

Standard machining under methacrylate of maximum 110 x 110 mm. Needed 2 per step (readers not included).

Bidirectional motor-driven door with tempered glass panel, 10 mm thick, 1800 mm high. Detection of presence by means of 10 parametrisable photo-cells + photo-cell security distributed in the length of the piece of furniture that allows the detection of multiple combinations of totally programmable pass both valid and undue, passage of wheelchairs, carts, etc. Control logic capable of activating operations designed to protect the user. Internal customization panel with more than 120 parameters. 3 detection levels pre-programmed and 1 special for wheelchairs. Buffer for the storage of multiple opening requests. Encoder and electronic management of speeds and strength of the opening and closing of the doors. Pivoting doors that open in the direction of the passage for an optimal welcome effect. Minimum surface occupation. Minimalist design with high customization capacity. Connection interface with MP2000 control console. Dimensions: [Tall furniture: 1000 mm; Furniture width 170 mm; Long furniture 1500 mm; Panel height 1800 mm from ground level].

Bidirectional motor-driven door with tempered glass panel, 10 mm thick, 1800 mm high. Detection of presence by means of 10 parametrisable photo-cells + photo-cell security distributed in the length of the piece of furniture that allows the detection of multiple combinations of totally programmable pass both valid and undue, passage of wheelchairs, carts, etc. Control logic capable of activating operations designed to protect the user. Internal customization panel with more than 120 parameters. 3 detection levels pre-programmed and 1 special for wheelchairs. Buffer for the storage of multiple opening requests. Encoder and electronic management of speeds and strength of the opening and closing of the doors. Pivoting doors that open in the direction of the passage for an optimal welcome effect. Minimum surface occupation. Minimalist design with high customization capacity. Connection interface with MP2000 control console. Dimensions: [Tall furniture: 1000 mm; Furniture width 170 mm; Long furniture 1500 mm; Panel height 1800 mm from ground level].

Bidirectional motor-driven door with tempered glass panel, 10 mm thick, 1800 mm high. Detection of presence by means of 10 parametrisable photo-cells + photo-cell security distributed in the length of the piece of furniture that allows the detection of multiple combinations of totally programmable pass both valid and undue, passage of wheelchairs, carts, etc. Control logic capable of activating operations designed to protect the user. Internal customization panel with more than 120 parameters. 3 detection levels pre-programmed and 1 special for wheelchairs. Buffer for the storage of multiple opening requests. Encoder and electronic management of speeds and strength of the opening and closing of the doors. Pivoting doors that open in the direction of the passage for an optimal welcome effect. Minimum surface occupation. Minimalist design with high customization capacity. Connection interface with MP2000 control console. Dimensions: [Tall furniture: 1000 mm; Furniture width 170 mm; Long furniture 1500 mm; Panel height 1800 mm from ground level].

Bidirectional motor-driven door with tempered glass panel, 10 mm thick, 1800 mm high. Detection of presence by means of 10 parametrisable photo-cells + photo-cell security distributed in the length of the piece of furniture that allows the detection of multiple combinations of totally programmable pass both valid and undue, passage of wheelchairs, carts, etc. Control logic capable of activating operations designed to protect the user. Internal customization panel with more than 120 parameters. 3 detection levels pre-programmed and 1 special for wheelchairs. Buffer for the storage of multiple opening requests. Encoder and electronic management of speeds and strength of the opening and closing of the doors. Pivoting doors that open in the direction of the passage for an optimal welcome effect. Minimum surface occupation. Minimalist design with high customization capacity. Connection interface with MP2000 control console. Dimensions: [Tall furniture: 1000 mm; Furniture width 170 mm; Long furniture 1500 mm; Panel height 1800 mm from ground level].

Bidirectional motor-driven door with 1800 mm sliding panels high and 900 mm width of passage. Detection of presence by means of parametrisable photo-cells spread over the length of the piece of furniture that allows the detection of multiple combinations of totally programmable pass both valid and undue, passage of wheelchairs, carts, etc ... Speed of step up to 40 people per minute (proximity). "tailgating" algorithm for fraudulent step detection: step in the opposite direction, crawling and excess passing time.

Bidirectional motor-driven door with 1800 mm sliding panels high and 900 mm width of passage. Detection of presence by means of parametrisable photo-cells spread over the length of the piece of furniture that allows the detection of multiple combinations of totally programmable pass both valid and undue, passage of wheelchairs, carts, etc ... Speed of step up to 40 people per minute (proximity). "tailgating" algorithm for fraudulent step detection: step in the opposite direction, crawling and excess passing time.

Bidirectional motor-driven door with 1800 mm sliding panels high and 550 mm width of passage. Detection of presence by means of parametrisable photo-cells spread over the length of the piece of furniture that allows the detection of multiple combinations of totally programmable pass both valid and undue, passage of wheelchairs, carts, etc ... Speed of step up to 40 people per minute (proximity). "tailgating" algorithm for fraudulent step detection: step in the opposite direction, crawling and excess passing time.

Bidirectional motor-driven door with 1800 mm sliding panels high and 550 mm width of passage. Detection of presence by means of parametrisable photo-cells spread over the length of the piece of furniture that allows the detection of multiple combinations of totally programmable pass both valid and undue, passage of wheelchairs, carts, etc ... Speed of step up to 40 people per minute (proximity). "tailgating" algorithm for fraudulent step detection: step in the opposite direction, crawling and excess passing time.

Intermediate Cabinet with two barrier for 1100mm passage lane. Sensors (Transmitters Tx) on one side and sensors (Receivers Rx) on the other side. 10mm safety glass panels, transparent, height - 850mm. Cabinet height: 975 mm. Cabinet length: 1450mm. Cabinet width: 210 mm (same cabinet width forstandard passage lane and DDA passage lane). Barrier height: 690 mm. Base and housing: Brushed stainless steel. 13,8VDC Fail-Safe motor (Unlocking security in case of power failure). Access Light (with integrated proximity reader bracket)/Lane Light not included. Power supply not included.

Intermediate Cabinet with individual barrier for standard passage lane (550mm or 600mm passage). Sensors (Transmitters Tx) on one side and sensors (Receivers Rx) on the other side. 10mm safety glass panels, transparent, height - 850mm. Cabinet height: 975 mm. Cabinet length: 1450mm. Cabinet width: 210 mm (same cabinet width forstandard passage lane and DDA passage lane). Barrier height: 690 mm. Base and housing: Brushed stainless steel. 13,8VDC Fail-Safe motor (Unlocking security in case of power failure). Access Light (with integrated proximity reader bracket)/Lane Light not included. Power supply not included.

Intermediate Cabinet without glass panel. Sensors (Transmitters Tx) on one side and sensors (Receivers Rx) on the other side. Cabinet height: 975 mm. Cabinet length: 1450mm. Cabinet width: 210 mm (same cabinet width forstandard passage lane and DDA passage lane). Barrier height: 690 mm. Base and housing: Brushed stainless steel. 13,8VDC Fail-Safe motor (Unlocking security in case of power failure). Access Light (with integrated proximity reader bracket)/Lane Light not included. Power supply not included.

Lateral Cabinet without glass panel. Sensors (Receivers Rx) only on one side. Cabinet height: 975 mm. Cabinet length: 1450mm. Cabinet width: 210 mm (same cabinet width for standard passage lane and DDA passage lane). Barrier height: 690 mm. Base and housing: Brushed stainless steel. 13,8VDC Fail-Safe motor (Unlocking security in case of power failure). Access Light (with integrated proximity reader bracket)/Lane Light not included. Power supply not included.

Lateral Cabinet with individual barrier for standard passage lane (550mm or 600mm passage). Sensors (Transmitters Tx) only on cristal wing side. Glass wing 10 mm. Cabinet height: 975 mm. Cabinet length: 1450mm. Cabinet width: 210 mm. Base and housing: Brushed stainless steel. 13,8VDC Fail-Safe motor (Unlocking security in case of power failure). Access Light (with integrated proximity reader bracket)/Lane Light not included. Power supply not included.

Furniture with 2 crystals (INTERMEDIATE) for aisle / automatic gate. Manufactured in AISI-304L stainless steel, bidirectional electrical operation, standard sliding panels of security glass 10 mm thick (transparent color), height 991 mm (glass doors 900 mm high). Includes standard external support for integration of reader on unit and pictogram. Railings 1184 mm long). To make 2 corridors of 550 mm of passage width. Power supply 110-240 VAC (+/- 10%).

END UNIT handrail for aisle/automatic gate. Made of stainless steel AISI-304L, height 991 mm (glass doors 900 mm high). Furniture length: 1184 mm. To configure aisle closures. Power supply 110-240 VAC (+/- 10%).

INTERMEDIATE handrail for aisle / automatic gate. Made of stainless steel AISI-304L, height 991 mm (glass doors 900 mm high). Furniture length: 1184 mm. To configure aisle closures. Power supply 110-240 VAC (+/- 10%).

INTERMEDIATE short cabinet for aisle/automatic gate, with service lane. Made of stainless steel AISI-304L, bidirectional electrical operation, sliding panels of SPECIAL or HYBRID width of security glass 10 mm thick (transparent color), height 991 mm (glass doors 900 mm high). Includes standard external support for integration of reader on unit and pictogram. Railings 1555 mm long). To make 2 corridors of 550 mm of passage width. Power supply 110-240 VAC (+/- 10%).

INNER short cabinet for aisle / automatic gate. Made of AISI-304L stainless steel, bidirectional electrical operation, standard sliding panel security glass 10 mm thick (transparent color), height 991 mm (glass doors 900 mm high). Includes standard external support for integration of reader on unit and pictogram. Handrails of length 1555 mm. To form a corridor with a width of 550 mm. Power supply 110-240 VAC (+/- 10%).

Short END UNIT for aisle / automatic gate. Made of AISI-304L stainless steel, bidirectional electrical operation, standard sliding panel security glass 10 mm thick (transparent color), height 991 mm (glass doors 900 mm high). Includes standard external support for integration of reader on unit and pictogram. Handrails of length 1555 mm. To form a corridor with a width of 550 mm. Right or left. Power supply 110-240 VAC (+/- 10%).