The enclosure protects the recorder against unauthorized access or theft. The enclosure is made of steel with a thickness of 1mm. It is equipped with lock and two tamper switches, indicating enclosure opening and detachment from the wall. Due to the vertical installation and low depth, it is ideal for places where deeper enclosures or cabinets type Rack19" cannot be installed. After opening the enclosure, the front cover is held in a horizontal position, providing easy access to the buttons on the front panel of DVR. Dimensions: 320 x 430 x 82 + 14 mm. Dimensions of the recorder compartment: 260 x 250 x 62 mm. Material: sheet DC01 1mm. Enclosure: IP20. Distance from wall: 14 mm. Tamper protection: 1x microswitch: opening. Closing: Lock MR008. Destination: indoor. Operating temperature: -10 to +40°C

The enclosure protects the recorder against unauthorized access or theft. The enclosure is made of steel with a thickness of 1mm. It is equipped with lock and two tamper switches, indicating enclosure opening and detachment from the wall. Due to the vertical installation and low depth, it is ideal for places where deeper enclosures or cabinets type Rack19" cannot be installed. After opening the enclosure, the front cover is held in a horizontal position, providing easy access to the buttons on the front panel of DVR. The enclosure is fitted with a special adjustable handle for installation of recorders with the following dimensions: Width from 145 mm to 345 mm. Height: from 40 mm to 100 mm. External dimensions: 435 x 500 x 130 mm. Internal dimensions: 385 x 495 x 110 mm. Finish: sheet DC01, thickness 1 mm, corrosion protection. Protection class: IP20. Antisabotage protection: 2x microswitch: opening and detachment of the enclosure. Locking: lock. Application: indoor. Distance from the wall: 8 mm.

The enclosure protects the recorder against unauthorized access or theft. The enclosure is made of steel with a thickness of 1mm. It is equipped with lock and two tamper switches, indicating enclosure opening and detachment from the wall. Due to the vertical installation and low depth, it is ideal for places where deeper enclosures or cabinets type Rack19" cannot be installed. After opening the enclosure, the front cover is held in a horizontal position, providing easy access to the buttons on the front panel of DVR. The enclosure is fitted with a special adjustable handle for installation of recorders with the following dimensions: Width from 145 mm to 345 mm. Height: from 40 mm to 100 mm. External dimensions: 435 x 500 x 130 mm. Internal dimensions: 385 x 495 x 110 mm. Finish: sheet DC01, thickness 1 mm, corrosion protection. Protection class: IP20. Antisabotage protection: 2x microswitch: opening and detachment of the enclosure. Locking: lock. Application: indoor. Distance from the wall: 8 mm.

The enclosure protects the recorder against unauthorized access or theft. The enclosure is made of steel with a thickness of 1mm. It is equipped with lock and two tamper switches, indicating enclosure opening and detachment from the wall. Due to the vertical installation and low depth, it is ideal for places where deeper enclosures or cabinets type Rack19" cannot be installed. After opening the enclosure, the front cover is held in a horizontal position, providing easy access to the buttons on the front panel of DVR. The enclosure is fitted with a special adjustable handle for installation of recorders with the following dimensions: Width from 245 mm to 445 mm. Height: from 40 mm to 100 mm. External dimensions: 535 x 650 x 130 mm. Internal dimensions: 490 x 630 x 110 mm. Finish: sheet DC01, thickness 1 mm, corrosion protection. Protection class: IP20. Antisabotage protection: 2x microswitch: opening and detachment of the enclosure. Locking: lock. Application: indoor. Distance from the wall: 8 mm.

The enclosure protects the recorder against unauthorized access or theft. The enclosure is made of steel with a thickness of 1mm. It is equipped with lock and two tamper switches, indicating enclosure opening and detachment from the wall. Due to the vertical installation and low depth, it is ideal for places where deeper enclosures or cabinets type Rack19" cannot be installed. After opening the enclosure, the front cover is held in a horizontal position, providing easy access to the buttons on the front panel of DVR. The enclosure is fitted with a special adjustable handle for installation of recorders with the following dimensions: Width from 245 mm to 445 mm. Height: from 40 mm to 100 mm. External dimensions: 535 x 650 x 130 mm. Internal dimensions: 490 x 630 x 110 mm. Finish: sheet DC01, thickness 1 mm, corrosion protection. Protection class: IP20. Antisabotage protection: 2x microswitch: opening and detachment of the enclosure. Locking: lock. Application: indoor. Distance from the wall: 8 mm.

Enclosure construction is compliant with requirements of General Data Protection Regulation (GDPR), as personal data must be protected and stored securely. Surface mounted enclosure DVR/Monitor/RACK/vertical white protects recorder/monitor/switch against unauthorized access or theft. Made of 1,2 mm steel plate. In enclosure there is installed bracket with stripes for mounting recorder and another bracket for mounting monitor max. 22”. Set includes: two locks (different code), two keys/each lock, mounting plate for monitor, RACK brackets - 4U, stripes for mounting recorder, tamper switch indicating enclosure opening, screws (RAS4 – 2pcs, M4x10 - 4 pcs), three pole connector with fuse, screws for mounting power distribution unit.

Vertical surface-mounted RACK 3U enclosure is universal solution for organizing and protecting against unauthorized access or theft of devices in RACK 19 ” standard with total height of up to 3U. It has special system for hanging devices with possibility of choosing 3 mounting heights and convenient way to remove devices from enclosure. There are also special holders for mounting straps for devices without RACK mounting standard. Inside is double ~ 230 V power socket with power connector equipped with glass fuse. Space for battery: 4x7Ah / 2x17Ah. Tamper protection: YES. Material: 1mm sheet, RAL9003 color. Closing: twisted 2x cheese screw. Distance from the wall 14mm. Working temperature: -10 ° C ÷ 40 ° C. Mounting space: 530x380x155mm. Position of RACK 19'' profiles: 380mm or 324mm or 268mm. Internal dimensions: 535x540x165mm.

The transformers are destined for supplying devices requiring AC voltage U1 or U2. (intercom, electric strike). Power supply voltage: 230 VAC. Power supply output: 11.5V/0.8Amp or 14V/0.6Amp. Power: 10VA. Notes: epoxy encapsulated. Protection rating: IP64. Cable length L2: 1610mm. Cable length L1: 1025mm. Operating temperature: -10º C÷40º C. Heat class: Ta 40B. Dimensions: 88 x 54 x 70 mm.

The transformers are affected to supply voltage to the devices that require an AC power supply isolated from the 230 VAC mains. At the output we obtain the AC voltage: 24V, 27V or 33V. The transformer has protection: (1) fuse protection in the power circuit (T 1Amp / 250V), (2) overload in the form of a 130° C thermal fuse. Designed to operate in sections of power alarm systems . Supply voltage: V DC230V AC. Output voltage: 24, 27, 33V. Power: 100VA. Dimensions: 110 x 52 mm. Operating temperature: -10 ... + 40° C.

Transformers are intended for supplying devices requiring AC power supply insulated from 230V AC mains. On the output we get the AC voltage: 16V lub 18V. The transformer has protection: (1) protection in the form of a fuse in the power supply circuit (T 315mA/250V), (2) overload in the form of a thermal fuse 130° C. Input voltage: 230V AC. Power: 40VA. Outputs: 16V / 2.2Amp or 18V / 2.0Amp. Dimensions: 93 x 60 x 65 mm. Working temperature: -10° C÷ 40° C.

The transformer is designed for continuous operation, powered with AC 230V. On the output we get the AC voltage: 16V or 18V. The transformer is protected: (1) Protection in the form of a fuse in the power supply circuit (T 315mA 250V), (2) Overload in the form of thermal fuse 130° C. Designed to work in sections power alarm systems. Supply voltage: 230V AC. Current consumption: 0.20Amp. Output voltage: 16, 18V AC. Power: 40VA. Dimensions: 124 x 72 x 70 mm. Operating temperature: -10 ... +40° C. Protection class: 30IP.

Power: 60VA. Power supply: 230V/50Hz/0.33A. Power supply output: 18V/3,3A or 20V/3,0A. Enclosure: PC/ABS, V-O, IP43. Thermal fuse 130ºC. Notes: epoxy encapsulated. For mounting on a DIN rail, required bracket: AWO466.

The transformer is designed for continuous operation, powered with AC 230V. On the output we get the AC voltage: 17V 24V or 30V. The transformer is protected: (1) protection in the form of a fuse in the power supply circuit (T 630mA 250V), (2) Overload. Designed to work in sections power alarm systems. Supply voltage: 230V AC. Current consumption: 0.40Amp. Output voltage: 17, 24, 30V AC. Dimensions: 136 x 95 x 76 mm. Operating temperature: -10 ... +40° C. Protection class: 43IP.

A buffer PSU is intended for an uninterrupted supply to alarm system devices requiring stabilized voltage of 12V DC (+/-15%). Alinear stabilizing system, which has been used in the unit, provides voltage with a lower level of noise and a quicker response to interference when compared to a switched-mode regulator. The PSU provides voltage of Uout = 12,8V ÷ 13,8V DC during buffer operation. In case of power decay, a battery back-up is activated immediately. The PSU is housed in a metal enclosure which can accommodate a 1,2Ah/12V battery. It features a micro switch (TAMPER) that indicates door opening (front cover). Power supply: 230VAC/50Hz. Power supply output: 1A/13,8VDC. Battery charging current: 0,1A. Fitting battery: 1,2Ah/12V. Protections: SCP, OLP, UVP, tamper (opening of the enclosure). Dimensions: W=170 H=180 D+D1=82+8 [+/- 2mm]. Notes: surface mounted enclosure, locking – bolted.

A buffer PSU is intended for an uninterrupted supply to alarm system devices requiring stabilized voltage of 12V DC (+/-15%). Alinear stabilizing system, which has been used in the unit, provides voltage with a lower level of noise and a quicker response to interference when compared to a switched-mode regulator. The PSU provides voltage of Uout = 12,8V ÷ 13,8V DC. In case of power decay, a battery back-up is activated immediately. The PSU is housed in a metal enclosure which can accommodate a 7Ah/12V battery. It features a micro switch (TAMPER) that indicates door opening (front cover). Power supply: 230VAC/50Hz. Power supply output: 1A/13,8VDC. Battery charging current: 0,1A. Fitting battery: 7Ah/12V. Protections: SCP, OLP, UVP, tamper (opening of the enclosure). Dimensions: W=200 H=230 D+D1=82+8 [+/- 2mm]. Surface mounted enclosure, locking – bolted.

The buffer power supply is designed in accordance with the requirements of the EN 50131-6 standard, grade 1÷2 and II environmental class. It is intended for an uninterrupted supply of alarm system devices requiring stabilized voltage of 12 V DC (+/-15%). Alinear stabilizing system, which has been used in the unit, provides voltage with a lower level of noise and a quicker response to interference when compared to a switched-mode regulator Power supply: 230VAC/50Hz. Power supply output: (1) 2A/13,8VDC – for general application (2) 1,1A/13,8VDC – for grade 1, 2. Battery charging current: 0,4A/0,9A. Fitting battery: 17Ah/12V. Current consumption by PSU systems: 15 mA max. Protections: SCP, OLP, OVP, UVP, tamper (opening of the enclosure). Technical outputs OC type: EPS – 230V power failure AC, PSU – power supply failure, APS – battery failure. Compliance with the standards: EN50131-6. Dimensions: W=230 H=300 D+D1=82+8 mm [+/- 2mm]. Surface mounted enclosure, locking – bolted.

A buffer PSU is intended for an uninterrupted supply to alarm system devices requiring stabilized voltage of 12V DC (+/-15%). Alinear stabilizing system, which has been used in the unit, provides voltage with a lower level of noise and a quicker response to interference when compared to a switched-mode regulator. The PSU provides voltage of Uout = 12,8V ÷ 13,8V DC during buffer operation. In case of power decay, a battery back-up is activated immediately. The PSU is housed in a metal enclosure which can accommodate a 7Ah/12V battery. It features a micro switch (TAMPER) that indicates door opening (front cover). Power supply: 230VAC/50Hz. Power supply output: 2A/13,8VDC. Battery charging current: 0,3A. Fitting battery: 7Ah/12V. Protections: SCP, OLP, UVP, tamper (opening of the enclosure). Dimensions: W=200 H=230 D+D1=82+8 [+/- 2mm]. Surface mounted enclosure, locking – bolted.

A buffer PSU is intended for an uninterrupted supply to alarm system devices requiring stabilized voltage of 12V DC (+/-15%). A linear stabilizing system, which has been used in the unit, provides voltage with a lower level of noise and a quicker response to interference when compared to a switched-mode regulator. The PSU provides voltage of Uout = 12,8V ÷ 13,8V DC during buffer operation. In case of power decay, a battery back-up is activated immediately. The PSU is housed in a metal enclosure which can accommodate a 17Ah/12V battery. It features a micro switch (TAMPER) that indicates door opening (front cover). Power supply: 230VAC/50Hz. Power supply output: 3A/13,8VDC. Battery charging current: 0,7A. Fitting battery: 17Ah/12V. Protections: SCP, OLP, UVP, tamper (opening of the enclosure). Dimensions: W=230 H=300 D+D1=92+8 [+/- 2mm]. Surface mounted enclosure, locking – bolted.

The buffer power supply is designed in accordance with the requirements of the EN 50131-6 standard, grade 1÷2 and II environmental class. It is intended for an uninterrupted supply of alarm system devices requiring stabilized voltage of 12 V DC (+/-15%). Alinear stabilizing system, which has been used in the unit, provides voltage with a lower level of noise and a quicker response to interference when compared to a switched-mode regulator. Power supply: 230VAC/50Hz. Power supply output: (1) 3A/13,8VDC - for general application (2) 1,4A/13,8VDC - for grade 1, 2. Battery charging current: 0,4A/0,9A. Fitting battery: 17Ah/12V. Current consumption by PSU systems: 15 mA max. Protections: SCP, OLP, OVP, UVP, tamper (opening of the enclosure). Technical outputs OC type: EPS - 230V power failure AC, PSU - power supply failure, APS – battery failure. Compliance with the standards: EN50131-6. Dimensions: W=230 H=300 D+D1=82+8 mm [+/- 2mm]. Surface mounted enclosure, locking – bolted.

Backup power supply designed in accordance with the requirements of EN 50131, grade 1 ÷ 2. It is intended for an uninterrupted supply of alarm system devices that require a stabilized voltage of 12 VDC (+/- 15%). The linear stabilization system, which has been used in the unit, provides voltage with a lower noise level and a faster response to interference compared to a switched mode regulator. Power supply: 230VAC / 50Hz. Power supply output: (1) 2A / 13.8VDC - for general application (2) 0.58A / 13.8VDC - for grade 1, 2. Battery charging current: 0.2A / 0.5A. Supported battery: 7Ah / 12V. Current consumption by PSU systems: 15 mA max. Protections: SCP, OLP, OVP, UVP, sabotage (opening of the enclosure). Technical outputs type OC: EPS - 230V AC power failure, APS - battery failure. Compliance with standards: EN50131, level 1 ÷ 2, EN60839-11. Dimensions: 205 x 237 x 82 [+/- 2mm] (ground clearance: 8mm). Surface mounted box, locked - bolted.

Backup power supply designed in accordance with the requirements of EN 50131, grade 1 ÷ 2. It is intended for an uninterrupted supply of alarm system devices that require a stabilized voltage of 12 VDC (+/- 15%). The linear stabilization system, which has been used in the unit, provides voltage with a lower noise level and a faster response to interference compared to a switched mode regulator. Power supply: 230VAC / 50Hz. Power supply output: (1) 3A / 13.8VDC - for general application (2) 1.41A / 13.8VDC - for grade 1, 2. Battery charging current: 0.5A / 1A. Supported battery: 17Ah / 12V. Current consumption by PSU systems: 15 mA max. Protections: SCP, OLP, OVP, UVP, sabotage (opening of the enclosure). Technical outputs type OC: EPS - 230V AC power failure, APS - battery failure. Compliance with standards: EN50131, level 1 ÷ 2, EN60839-11. Dimensions: 235 x 305 x 82 [+/- 2mm] (ground clearance: 8mm). Surface mounted box, locked - bolted.

Backup power supply designed in accordance with the requirements of EN 50131, grade 1 ÷ 2. It is intended for an uninterrupted supply of alarm system devices that require a stabilized voltage of 12 VDC (+/- 15%). The linear stabilization system, which has been used in the unit, provides voltage with a lower noise level and a faster response to interference compared to a switch mode regulator. Power supply: 230VAC / 50Hz. Power supply output: (1) 5A / 13.8VDC - for general application (2) 1.41A / 13.8VDC - for grade 1, 2. Battery charging current: 0.5A / 1A / 2A. Supported battery: 17Ah / 12V. Current consumption by PSU systems: 15 mA max. Protections: SCP, OLP, OVP, UVP, sabotage (opening of the enclosure). Technical outputs type OC: EPS - 230V AC power failure, APS - battery failure. Compliance with standards: EN50131, level 1 ÷ 2, EN60839-11. Dimensions: 305 x 305 x 105 [+/- 2 mm] (ground clearance: 8 mm). Surface mounted box, locked - bolted.

Backup power supply designed in accordance with the requirements of EN 50131, grade 1 ÷ 2. It is intended for an uninterrupted supply of alarm system devices that require a stabilized voltage of 12 VDC (+/- 15%). The linear stabilization system, which has been used in the unit, provides voltage with a lower noise level and a faster response to interference compared to a switched mode regulator. Power supply: 230VAC / 50Hz. Power supply output: (1) 5A / 13.8VDC - for general application (2) 3.33A / 13.8VDC - for grade 1, 2. Battery charging current: 0.5A / 1A / 2A. Supported battery: 1 x 7Ah / 1 x 17Ah / 1 x 40Ah (12V). Current consumption by PSU systems: 15 mA max. Protections: SCP, OLP, OVP, UVP, sabotage (opening of the enclosure). Technical outputs type OC: EPS - 230V AC power failure, APS - battery failure. Compliance with standards: EN50131, level 1 ÷ 2, EN60839-11. Dimensions: 335 x 385 x 173 [+/- 2mm] (ground clearance: 8mm). Surface mounted box, locked - bolted.

The buffer power supply is designed in accordance with the requirements of the EN 50131-6 standard, grade 1÷2 and II environmental class. It is intended for an uninterrupted supply of alarm system devices requiring stabilized voltage of 24V DC (+/-15%). A linear stabilizing system, which has been used in the unit, provides voltage with a lower level of noise and a quicker response to interference when compared to a switched-mode regulator. Power supply: 230VAC/50Hz. Power supply output: (1) 2A/27,6VDC - for general application (2) 0,58A/27,6VDC - for grade 1, 2. Battery charging current: 0,4A. Fitting battery: 2x7Ah/12V. Current consumption by PSU systems: 15 mA max. Protections: SCP, OLP, OVP, UVP, tamper (opening of the enclosure). Technical outputs OC type: EPS - 230V power failure AC, PSU - power supply failure, APS – battery failure. Compliance with the standards: EN50131-6. Dimensions: W=230 H=300 D+D1=92+8 mm [+/- 2mm]. Surface mounted enclosure, locking – bolted.