Backup power supply designed in accordance with the requirements of EN 50131, grade 1 ÷ 2. It is intended for an uninterrupted supply of alarm system devices that require a stabilized voltage of 12 VDC (+/- 15%). The linear stabilization system, which has been used in the unit, provides voltage with a lower noise level and a faster response to interference compared to a switched mode regulator. Power supply: 230VAC / 50Hz. Power supply output: (1) 2A / 27.6VDC - for general application (2) 0.58A / 27.6VDC - for grade 1, 2. Battery charging current: 0.5A / 1A. Batteries supported: 2 x 7Ah / 12V. Current consumption by PSU systems: 15 mA max. Protections: SCP, OLP, OVP, UVP, sabotage (opening of the enclosure). Technical outputs type OC: EPS - 230V AC power failure, APS - battery failure. Compliance with standards: EN50131, level 1 ÷ 2, EN60839-11. Dimensions: 205 x 305 x 82 [+/- 2mm] (ground clearance: 8mm). Surface mounted box, locked - bolted.

Backup power supply designed in accordance with the requirements of EN 50131, grade 1 ÷ 2. It is intended for an uninterrupted supply of alarm system devices that require a stabilized voltage of 12 VDC (+/- 15%). The linear stabilization system, which has been used in the unit, provides voltage with a lower noise level and a faster response to interference compared to a switched mode regulator. Power supply: 230VAC / 50Hz. Power supply output: (1) 3A / 27.6VDC - for general application (2) 1.41A / 27.6VDC - for grade 1, 2. Battery charging current: 0.5A / 1A. Batteries supported: 2 x 7Ah / 2 x 17Ah (12V). Current consumption by PSU systems: 15 mA max. Protections: SCP, OLP, OVP, UVP, sabotage (opening of the enclosure). Technical outputs type OC: EPS - 230V AC power failure, APS - battery failure. Compliance with standards: EN50131, level 1 ÷ 2, EN60839-11. Dimensions: 335 x 385 x 173 [+/- 2mm] (ground clearance: 14mm). Surface mounted box, locked - bolted.

Power supply output: 2A/13.8VDC - for general purpose application. 0.58A/13.8VDC - GRADE 1 and 2. Compliant with standards: (1) Construction compliant with EN50131, GRADE 1 and 2; (2) Access control norm EN60839-11:2013, Grade 1 and 2. Battery charging current: 0.2A/0.5A. Battery: 1 x 7Ah. Current consumption by PSU systems: 11mA max. Dimensions: 205 x 237 x 82 [+/-2 mm], distance from floor: 8 mm. Protections: SCP, OLP, OVP, UVP, tamper – opening of enclosure. Technical outputs OC type: (1) EPS – AC power failure, (2) APS – battery failure. LED optical indication. Material: sheet metal DC01, 0.7mm, RAL9003 (white), metallic. IP20.

Power supply output: 3A/13.8VDC - for general purpose application. 1.41A/13.8VDC - GRADE 1 and 2. Compliant with standards: (1) Construction compliant with EN50131, GRADE 1 and 2. (2) Access control norm EN60839-11:2013, Grade 1 and 2. Battery charging current: 0.5A/1A. Battery: 1 x 7Ah / 1 x 17Ah. Current consumption by PSU systems: 10mA max. Dimensions: 235 x 305 x 82 [+/-2 mm], distance from floor: 8 mm. Protections: SCP, OLP, OVP, UVP, tamper – opening of enclosure. Technical outputs OC type: (1) EPS – AC power failure, (2) APS – battery failure. LED optical indication. Material: sheet metal DC01, 0.7mm, RAL9003 (white), metallic. IP20.

Power supply output: 5A/13.8VDC. 1.41A/13.8VDC - GRADE 1 and 2. Compliant with standards: (1) Construction compliant with EN50131, GRADE 1 and 2. (2) Access control norm EN60839-11:2013, Grade 1 and 2. Battery charging current: 0.5A/1A/2A. Battery: 1 x 7Ah / 1 x 17Ah. Current consumption by PSU systems: 11mA max. Dimensions: 305 x 305 x 105 [+/-2 mm], distance from floor: 8 mm. Protections: SCP, OLP, OVP, UVP, tamper – opening of enclosure. Technical outputs OC type: (1) EPS – AC power failure, (2) APS – battery failure. LED optical indication. Material: sheet metal DC01, 0.7mm, RAL9003 (white), metallic. IP20.

Power supply output: 5A/13.8VDC - for general purpose application. 3.33A/13.8VDC - GRADE 1 and 2. Compliant with standards: (1) Construction compliant with EN50131, GRADE 1 and 2. (2) Access control norm EN60839-11:2013, Grade 1 and 2. Battery charging current: 0.5A/1A/2A. Battery: 1 x 7Ah / 1 x 17Ah / 1 x 40Ah. Current consumption by PSU systems: 11mA max. Dimensions: 335 x 385 x 173 [+/-2 mm], distance from floor: 14 mm. Protections: SCP, OLP, OVP, UVP, tamper – opening of enclosure. Technical outputs OC type: (1) EPS – AC power failure, (2) APS – battery failure. LED optical indication. Material: sheet metal DC01, 1mm, RAL9003 (white), metallic. IP20.

Power supply output: 2A/27.6VDC - for general purpose application. 0.58A/27.6VDC - GRADE 1 and 2. Compliant with standards: (1) Construction compliant with EN50131, GRADE 1 and 2. (2) Access control norm EN60839-11:2013, Grade 1 and 2. Battery charging current: 0.5A/1A. Battery: 2 x 7Ah. Current consumption by PSU systems: 14mA max. Dimensions: 205 x 305 x 82 [+/-2 mm], distance from floor: 8 mm. Protections: SCP, OLP, OVP, UVP, tamper – opening of enclosure. Technical outputs OC type: (1) EPS – AC power failure, (2) APS – battery failure. LED optical indication. Material: sheet metal DC01, 1mm, RAL9003 (white), metallic. IP20.

Power supply output: 3A/27.6VDC - for general purpose application. 1.41A/27.6VDC - GRADE 1 and 2. Compliant with standards: (1) Construction compliant with EN50131, GRADE 1 and 2. (2) Access control norm EN60839-11:2013, Grade 1 and 2. Battery charging current: 0.5A/1A. Battery: 2 x 7Ah / 2 x 17Ah. Current consumption by PSU systems: 14mA max. Dimensions: 335 x 385 x 173 [+/-2 mm], distance from floor: 14 mm. Protections: SCP, OLP, OVP, UVP, tamper – opening of enclosure. Technical outputs OC type: (1) EPS – AC power failure, (2) APS – battery failure. LED optical indication. Material: sheet metal DC01, 1mm, RAL9003 (white), metallic. IP20.

Enclosure with a cable frame 400x400. AWO644 enclosures are used in the ICT and telecommunication sectors. They are designed to store excessive fiber optic cable. The enclosure is compliant with the requirements of the ZN96/TPSA-009 standard. The possibility of coiling of up to 120 meters of fiber optic cable, depending on its diameter. The cover protects the cable against mechanical damage. The cover is mounted with a single screw. Dimensions: 400 x 400 x 105 [+/-2 mm]. Installation: surface-mounted. Material: sheet metal DC01, 1.2mm, RAL7035 (grey), metallic. IP protection class: IP20.

Power supply for cameras 24VAC in ABS enclosure, hermetic IP65. Size: 160 x 160 x 90 mm, Uout=24VAC/27VAC, 1x4A@24V or 1x3.7A@27V. SCP (short circuit protection) with standard fuses. Number of cable glands: 2. Diameter of the cable: 4 to 8 mm.

Power supply: 230VAC. Power supply output: 1x6A/24VAC. Protections: SCP, OLP, OHP. Operating conditions: 2nd environmental class, indoor, -25°C÷40°C. Dimensions: W=160 H=160 D=90 [+/- 2mm]. The number of cable glands / The diameter of the cable: 2 pcs / 4÷8mm. Notes: hermetic enclosure IP65, ABS, surface mounted, locking – bolted.

Power supply for cameras 24VAC in ABS enclosure, hermetic IP65. Size: 160 x 160 x 90 mm, Uout=24VAC/27VAC, 1x6A@24V or 1x5.5A@27V. SCP (short circuit protection) with standard fuses. Number of cable glands: 2. Diameter of the cable: 4 to 8 mm.

The AWO269S bracket allows mounting of modules and accessories, designed for TH35 din rail mounting, inside the enclosure. Intended use: DIN rail with SATEL housing brackets - AWO269PU. Dimensions: W=280 H=35 D=43 mm. Notes: The set includes: 4x self-tapping screw and 2x cap screw M4x6.

SWS-150 is designed for uninterrupted power supply of PoE switches with 52 V DC. It was designed based on high energy efficiency switching power supply module placed in metal enclosure (color RAL 9003). Enclosure is equipped with a tamper switch signaling opening the door (front panel). Device is equipped with removable universal mounting plate, which allows to mount PoE switches with dimensions up to 230x110x45 (WxHxD) [mm]. For example Pulsar’s models: S64, SG64, SFG64, SFG64F1, S108, SG108. Power supply: 200÷240VAC. Power supply output: 52VDC/150W, voltage adjustment range: 48÷53VDC, power cable included - JACK 5,5 / 2,1. Efficiency 88%. Dimensions: 300 x 300 x 105 [+/-2 mm], distance from floor: 8 mm. Mounting plate: blacha (BM2), 230 x 110 [+/-2 mm]. Protections: SCP, OLP, OVP, tamper – opening of enclosure. Closing: bolted (lock assembly possible). Material: sheet metal DC01, 1mm, RAL9003 (white), metallic.

Buffer power supply system for PoE switches, SWB-120 is designed for uninterrupted power supply of PoE switches with 52 V DC. It was designed based on high energy efficiency switching power supply module placed in metal enclosure (color RAL 9003). DC / DC converter used to increase voltage allows to reduce costs of system by limiting batteries to 2 pc. Enclosure has a place for 2 pcs of 17Ah / 12 V (SLA) battery and is equipped with a tamper switch signaling opening the door (front panel). Device is equipped with removable universal mounting plate, which allows to mount PoE switches with dimensions up to 245x150x90 (WxHxD) [mm]. For example Pulsar’s models: S64, SG64, SFG64, SFG64F1, S108, SG108, SF108. Power supply: 200÷240VAC. Power supply output: 52VDC/120W, power cable included - JACK 5,5 / 2,1. Battery charging current: 0.5A/2A. Battery: 2 x 7Ah / 2 x 17Ah. Efficiency 85%. Dimensions: 330 x 380 x 173 [+/-2 mm], distance from floor: 8 mm. Mounting plate: blacha (BM1), 245 x 150 [+/-2 mm]. Protections: SCP, OLP, OVP, UVP, tamper – opening of enclosure. Closing: bolted (lock assembly possible). Indication: LED optical indication. Material: sheet metal DC01, 1mm, RAL9003 (white), metallic.

Buffer power supply system for PoE switches. SWB-60 is designed for uninterrupted power supply of PoE switches with 52 V DC. It was designed based on high energy efficiency switching power supply module placed in metal enclosure (color RAL 9003). DC / DC converter used to increase voltage allows to reduce costs of system by limiting batteries to 1 pc. Enclosure has a place for 7Ah / 12 V (SLA) battery and is equipped with a tamper switch signaling opening the door (front panel). Device is equipped with removable universal mounting plate, which allows to mount PoE switches with dimensions up to 230x110x45 (WxHxD) [mm]. For example Pulsar's models: S64, SG64, SFG64, SFG64F1, S108, SG108. Power supply 200÷240VAC. Power supply output: 52VDC/60W, power cable included - JACK 5,5 / 2,1. Battery charging current: 1A/2A. Battery: 1 x 7Ah. Efficiency 82%. Dimensions: 300 x 300 x 105 [+/-2 mm], distance from floor: 8 mm. Mounting plate: blacha (BM2), 230 x 110 [+/-2 mm]. Protections: SCP, OLP, OVP, UVP, tamper – opening of enclosure. Closing: bolted (lock assembly possible). Indication LED optical indication. Material: sheet metal DC01, 1mm, RAL9003 (white), metallic.

Buffer power supply system for PoE switches, SWB-300 is designed for uninterrupted power supply of PoE switches with 54 V DC. It was designed based on high energy efficiency switching power supply module placed in metal enclosure (color RAL 9003). Enclosure has a place for 4 pcs of 17 Ah / 12 V (SLA) battery and is equipped with a tamper switch signaling opening the door (front panel). Device is equipped with removable universal mounting plate, which allows to mount PoE switches with dimensions up to 245x150x90 (WxHxD) [mm]. For example Pulsar’s models: S64, SG64, SFG64, SFG64F1, S108, SG108, SF108. Power supply: 200÷240VAC. Power supply output: 54VDC/300W, power cable included - JACK 5,5 / 2,1. Battery charging current: 0.5A/1A/2A. Battery: 4 x 7Ah / 4 x 17Ah. Efficiency 87%. Dimensions: 460 x 390 x 173 [+/-2 mm], distance from floor: 8 mm. Mounting plate: blacha (BM1), 245 x 150 [+/-2 mm]. Protections SCP, OLP, OVP, UVP, OHP, tamper – opening of enclosure. Closing: bolted (lock assembly possible). Indication: LED optical indication. Material: sheet metal DC01, 1mm, RAL9003 (white), metallic.

Buffer power supply system for PoE switches, SWB-300RACK is designed for uninterrupted power supply of PoE switches with 54 V DC. It was designed based on high energy efficiency switching power supply module placed in metal enclosure (color RAL 9003). Enclosure has a place for 4 pcs of 17 Ah / 12 V (SLA) battery and is equipped with a tamper switch signaling opening the door (front panel). Device is equipped with special system of mounting RACK switches with possibility of choosing 3 mounting heights and convenient way to remove devices. There are also special holders for fastening belts for devices without RACK mountings, you can also use the RAPDS adapter. Examples of Pulsar switch models: SF108WP, S116WP, S124WP, SF116WP, SF124WP. Power supply output: 54VDC/300W, power cable included - EDG 5.08-2P, DC 2.1 / 5.5 reduction included. Battery charging current: 0.5A/1A/2A. Battery: 4 x 7Ah / 4 x 17Ah. Dimensions 535 x 650 x 165 [+/-2 mm], distance from floor: 14 mm. Profile RACK 19: 3U / horizontal / H = 360 [+/-2 mm]. Protections: SCP, OLP, OVP, UVP, OHP, tamper – opening of enclosure. Indication: LED optical indication. Material: sheet metal DC01, 1.2mm, RAL9003 (white), metallic.

Switch mode buffer power supply unit for cameras and recorders. Size: 275 x 115 x 50+23 mm. Uin=176÷264VAC, Uout=54VDC. ?I=5A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection), EPS (AC Failure), PSU (Power Supply Failure), LoB (Low Battery Voltage).

Switch mode buffer power supply unit for cameras and recorders. Size: 199 x 97 x 65 mm. Uin=176÷264VAC, Uout=13.8VDC. ?I=11A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection), EPS (AC Failure), PSU (Power Supply Failure), LoB (Low Battery Voltage).

Switch mode buffer power supply unit for cameras and recorders. Size: 275 x 115 x 73 mm. Uin=176÷264VAC, Uout=13.8VDC. ?I=20A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection), EPS (AC Failure), PSU (Power Supply Failure), LoB (Low Battery Voltage).

Switch mode buffer power supply unit for cameras and recorders. Size: 160 x 98 x 65 mm. Uin=176÷264VAC, Uout=13.8VDC. ?I=3.5A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection), EPS (AC Failure), PSU (Power Supply Failure), LoB (Low Battery Voltage).

Switch mode buffer power supply unit for cameras and recorders. Size: 199 x 97 x 65 mm. Uin=176÷264VAC, Uout=13.8VDC. ?I=7A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection), EPS (AC Failure), PSU (Power Supply Failure), LoB (Low Battery Voltage).

Switch mode buffer power supply unit for cameras and recorders. Size: 110 x 78 x 36 mm. Uin=176÷264VAC, Uout=13,8VDC. ?I=1.5A, SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection).