Wiegand controllers allow the access control installation to be provided with anti-sabotage security by incorporating the door opening mechanism and the exit button connection. The controller includes an Infrared programming keyboard for programming and maintenance of the installation. User capacity: 1,000. Access modes: Card, Card or Keyboard (PIN), card + keyboard (PIN). Power: 12Vdc (9-24VDC).

VEO KITS include all the necessary materials for an installation: Cityline entrance panel, a sure value, the result of combining classic aesthetics, robustness and reliability; VEO monitor and power supply. The board included in the kit includes the OneToOne information module. This kit includes: 7389.- City Color DUOX 1L plate with OneToOne informative screen and flush mounting box (ref. 8949). S4 plate: 130x199mm. S4 embedding box: 115x185x45mm. 9405.- VEO DUOX monitor with inductive loop. 9406.- DUOX connector. 4810.- 18VDC/1,5A-12VAC/1,5A power supply. DIN10. 3244.- DUOX filter. 3255.- Line adapter.

Interface that allows the local connection between the PC (serial port) and the installation, thus being able to configure, control and manage the installations. Used for management and maintenance of facilities that have the PC permanently connected. DIN-6 rail format for easy installation inside an electrical equipment box, or they can be screwed directly onto the wall. PC connection: Serial port (RS-232), max 30 meters (including 3 meter cable). Installation connection: RS-485 (twisted pair), max 1000 meters.

It is used to supply the different equipment of a Fermax installation. Constructed of self-extinguishing VO material. They include a set of covers to protect the connection terminals. DIN-6 rail format for easy installation inside an electrical equipment box, or they can be screwed directly onto the wall. It has two operating indicator LEDs: (1) ON led on: indicates that the power supply is operating. (2) OVERLOAD LED on: indicates maximum current exceeded, (it will be necessary to decrease the installation load or add additional power supply / s). (3) LED ON + OVERLOAD flashing: indicates short circuit.

It is used to supply the different equipment of a Fermax installation. Constructed of self-extinguishing VO material. They include a set of covers to protect the connection terminals. DIN-6 rail format for easy installation inside an electrical equipment box, or they can be screwed directly onto the wall. It has two operating indicator LEDs: (1) ON led on: indicates that the power supply is operating. (2) OVERLOAD LED on: indicates maximum current exceeded, (it will be necessary to decrease the installation load or add additional power supply / s). (3) LED ON + OVERLOAD flashing: indicates short circuit.

It is used to supply the different equipment of a Fermax installation. Constructed of self-extinguishing VO material. They include a set of covers to protect the connection terminals. DIN-6 rail format for easy installation inside an electrical equipment box, or they can be screwed directly onto the wall.

It is used to supply the different equipment of a Fermax installation. Constructed of self-extinguishing VO material. They include a set of covers to protect the connection terminals. DIN-10 rail format to facilitate installation inside an electrical equipment box, or they can be screwed directly onto the wall. It has two operating indicator LEDs: (1) ON led on: indicates that the power supply is operating. (2) OVERLOAD LED on: indicates maximum current exceeded, (it will be necessary to decrease the installation load or add additional power supply / s). (3) LED ON + OVERLOAD flashing: indicates short circuit.

It is used to supply the different equipment of a Fermax installation. Constructed of self-extinguishing VO material. They include a set of covers to protect the connection terminals. DIN-4 rail format to facilitate installation inside an electrical equipment box, or they can be screwed directly onto the wall.

FERMAX® power supply for 2-wire 230VAC audio kit. DIN6.

Power supply designed for WAY-FI Kit. It supplies power for outdoor station and indoor entry monitor. Universal AC input/full range. Multi protection: short circuit, overload, over voltage. DIN-8 rail format for easy installation inside an electrical equipment box, or can be screwed directly onto the wall. Input Voltage: 100~240VAC. Input Frequency: 50~60Hz. Output Voltage: DC 26V. Output Current: 2A. Operating Temperature: -10ºC ~ 50ºC. SW Port Input Voltage: Max.230Vac, 0.6A. Dimensions: 140x90x60mm.

Power supply designed for WAY Kit 2 wire non polarized system. It supplies power for outdoor station and indoor entry monitor. Universal AC input/full range. Multi protection: short circuit, overload, over voltage. DIN-8 rail format for easy installation inside an electrical equipment box, or can be screwed directly onto the wall. Input Voltage: 100~240VAC. Input Frequency: 50~60Hz. Output Voltage: DC 26V. Output Current: 2A. Operating Temperature: -10ºC ~ 50ºC. SW Port Input Voltage: Max.230Vac, 0.6A. Dimensions: 140x90x60mm.

It is used to supply the different equipment of a Fermax installation. Constructed of self-extinguishing VO material. They include a set of covers to protect the connection terminals. DIN-6 rail format for easy installation inside an electrical equipment box, or they can be screwed directly onto the wall. Necessary when there are automatic changers. In these cases it replaces the feeder ref. 4802. 12Vac / 1.5A and 12Vdc / 0.5A outputs. DIN6.

Necessary to activate an external device (courtesy light, second door, etc.) from the corresponding button (additional button) located on the phone or monitor. Small in size, they can be installed in electrical registers. They can be embedded in standard 10x10 cm boxes. They have adhesive strips for fixing, or they can be screwed directly to the wall.

Necessary to activate an external device (courtesy light, second door, etc.) from the corresponding button (additional button) located on the phone or monitor. Small in size, they can be installed in electrical registers. They can be embedded in standard 10x10 cm boxes. They have adhesive strips for fixing, or they can be screwed directly to the wall.

Vandal resistant keypad with integrated proximity, narrow profile and small dimensions. It allows to work in autonomous or centralized mode. Maximum capacity of up to 600 users. The keypad has a door sensor input (can be enabled or disabled). If activated and the door is opened without prior authorization, an alarm will be triggered until a valid identifier is presented and the door is closed. It will also trigger an alarm if the door remains open for more than 1 minute after valid access. The keypad is supplied with two master cards that allow registering or canceling cards or key chains, not codes. The codes are registered through the keypad itself. Centralized mode: Wiegand 26 / 8bits. IP66.

The RESISTANT PROXIMITY KIT includes a vandal-proof proximity reader, with a narrow profile and small dimensions, allowing it to be installed on narrow profile doors. It allows managing up to 1,000 users thanks to the MINI autonomous external controller (ref. 5276). This controller includes two MASTERS cards (HIGH / LOW) and an infrared IR keypad for card and parameter programming, 3 proximity cards (ref. 52750), 2 key fobs (ref. 52740) and a 12Vac / 1A power supply (ref. 4802). The controller allows up to 2 different types of access when installing a proximity reader. Card only; Multi-card. By presenting 2 to 9 valid cards, the door will open. Multi-card type access requires several identifiers. For example, if it is programmed with 3 identifiers, in order to activate the door, the user will present their valid card and until the two additional cards are passed (example of the guards), the door will not open.

Anti-vandalism proximity reader, narrow profile and small dimensions. It allows to work in autonomous or centralized mode, depending on the Wiegand 26 controller to which it is connected. Maximum capacity of up to 1,000 users. IP66.

This Radio Frequency Kit allows the door to be opened remotely through an RF remote control. At the door, a receiver is required that can be located both indoors (ideal for shops and garages) and outdoors. The remote has an exclusive code per user that offers maximum security and reaches a distance of up to 100 meters using the 868Mhz frequency band. And thanks to its advanced APS (Approaching System) transmission system, the remote control can be activated even when it is out of range of the receiver. The signal will be transmitted repeatedly for 15 seconds as the user approaches the door and until the moment it is opened. The kit includes RF receiver ref. 5250 up to 500 codes, feeder ref. 4802 and 3 KeySingle Mini controls ref. 5259.

Telephone-type keypad that allows the door to be opened by entering a previously programmed code of up to 6 digits. Aluminum color. Device that can be used in centralized access control systems "MDS" and/or "AC Plus". 12 Vdc ± 10% power supply (CN1). Consumption. 15 mA min; 100 mA max. Operating temperature 0 ÷ +60 ºC with H.R. 90% non-condensing. Dimensions: 85 x 88 x 25 mm.

RF emitter with programmable security code. It allows doors to be opened at a distance of up to 100 meters. It allows opening the door in accesses with receivers or 868Mhz radio frequency (RF) controllers. It has a button / s to activate the door opening, a LED indicating the pulsation and verification of the operation of the internal battery. It has 2 buttons. Each issuer has the identification code marked on the remote. It is necessary to register the remote control code on the receiver.

RF emitter with programmable security code. It allows doors to be opened at a distance of up to 100 meters. It allows opening the door in accesses with receivers or 868Mhz radio frequency (RF) controllers. It has a button / s to activate the door opening, a LED indicating the pulsation and verification of the operation of the internal battery. It has 4 buttons. Each issuer has the identification code marked on the remote. It is necessary to register the remote control code on the receiver.

RF emitter with programmable security code. It allows doors to be opened at a distance of up to 100 meters. It allows opening the door in accesses with receivers or 868Mhz radio frequency (RF) controllers. It has a button / s to activate the door opening, a LED indicating the pulsation and verification of the operation of the internal battery. It has 2 buttons. Each issuer has the identification code marked on the remote. It is necessary to register the remote control code on the receiver.

Call push buttons integrated into push button modules for the new SKYLINE panel, for placement in the panel frame. Call buttons in injected zamak with chrome finish, in line with the curved profile of the plate. Outdoor waterproof. Equipped with special gold-plated contacts that give them greater durability. The pressing of the call button is confirmed by an acoustic warning light emitted by the amplifier.

Call push buttons integrated into push button modules for the new SKYLINE panel, for placement in the panel frame. Call buttons in injected zamak with chrome finish, in line with the curved profile of the plate. Outdoor waterproof. Equipped with special gold-plated contacts that give them greater durability. The pressing of the call button is confirmed by an acoustic warning light emitted by the amplifier.