Temperature sensor cable.88ºC in vinyl. Comes in 152 m. rolls.For other measures and accessories, consult prices. Price by meter.

Short-circuit insulator module for MorleyIAS® analogical system for loop protection. The insulator module works by opening the communications loop in the case of detection of a short-circuit in the line or if the voltage is under to 4V, leaving only out of service the zone comprised between two insulator modules. Its installation is recommended each 20 detectors or directionable module. Provided with a bicolour LED (Green: Bling when question the device; Yellow: Fix for faillure). Connection through removable terminals (Up to 2,5mm2 section). Multiples mounting possibilities: In surface through M200SMB or SMB6-V0 box, in DIN rail through M200E-DIN adapter or in panel through M200PMB support.

Directionable monitor module for MorleyIAS® analogical system, with a conventional zone, with capacitive end of line, allows to connect up to 20 conventional detectors ECO1000, identified in the panel with a personalized message. Easy directioning through two rotary push buttons. Provided with a LED that indicate the device state. Includes a microswitch activable through a magnet to realize a local test. Includes a short-circuit insulator. Multiple mounting possibilities: In surface through M200SMB or SMB6-V0 box, in DIN rail through M200E-DIN adapter or in panel through M200PMB support.

Directionable micro-module monitor for MorleyIAS® analogical system, with a supervised input for status signalization of external devices that provides a free voltage contact, identifiying to the panel with a personalized message (Closed door, flow meter...). Easy directioning through two rotary push buttons.

1 Zone module for expansion of VSN-PARK1/2 carbon monoxide detection panel. Each module support a maximum of 16 detectors and its provided with 10 status LEDs, 2 level relays and 1 alarm relay.

2 Zones module for expansion of VSN-PARK1/2 carbon monoxide detection panel. Each module support a maximum of 32 detectors (16 detectors/zone) and its provided with 10 status LEDs, 2 level relays and 1 alarm relay.

Output module for MorleyIAS® analogical system, for DIN rail mounting that provides free voltage contacts of 240VCA and 5A, such NA as NC. Allows to monitored and control auxiliaries devices. Includes short-circuit insulator. Easy directioning through two rotary push buttons. Provided with a bicolour LED (Green: Bling when question the device; Yellow: Fix for faillure). Connection through removable terminals (Up to 2,5mm2 section).

Monitor and control module directionable for MorleyIAS® analogical system. Its composed of 2 input circuits for monitoring of alarm initiation devices or technical signals that provides a voltage-free contact and 1 NA/NC relay output for activation of signalling or notification systems, doors, fire dampers, solenoids, etc through the own analogical loop. Includes short-circuit insulator. Easily directionable through two dedicated rotary microswitches placed in the front or side of the module (Accessibles and visibles in DIN mounting rail). Occupy three consecutives directions. Dispose of three tricolor LEDs, one for each channel (Green: blink when is asking to the device; Red: Fix active relay; Yellow: Blink for failure in the input circuit). Connection through removable terminals (up to 2,5mm2 of section). Multiples mounting possibilites: In surface through M200SMB or SMB6-V0 box, DIN rail trhough M200E-DIN adaptator or in panel through M200PMB support.

Expansion module to 2 analogical loops with capacity for 99 sensors more 99 module by loop (396 identifiable points). Connectable to DXc2 panel (714-001-222) to upgrade it up to 4 loops.

Directionable monitor module for MorleyIAS® analogical system, with a supervised input for state signalization of extern devices that provides a contact normally open, identifying to the panel with a personalized message (Closed door, flow detector...). Includes short- circuit insulator. Easy directioning through two rotary placed in the front and the side of the module (Accessible and visible in DIN rail mounting). Provide a tricolour LED (Green: Blink when question to the device; Red: Fixed in alarm; Yellow: Blink when there is failure in the input circuit). Connection through removable terminals (Up to 2,5mm2 section). Multiple mounting possibilities: In surface through M200SMB or SMB6-V0 box, in DIN rail through M200E-DIN adapter or in panel through M200PMB support.

Directionable monitor module for MorleyIAS® analogical system, with two supervised inputs for state signalization of extern devices that provides a contact normally open, identifying to the panel with a personalized message (Closed door, flow detector...). Includes short-circuit insulator. Easy directionning through two rotary push buttons placed in the front a the side of the module (Accessible and visible in DIN rail mounting). Provide a tricolour LED (Green: Blink when question to the device; Red: Fixed in alarm; Yellow: Blink when there is failure in the input circuit). Connection through removable terminals (Up to 2,5mm2 section). Multiple mounting possibilities: In surface through M200SMB or SMB6-V0 box, in DIN rail through M200E-DIN adapter or in panel through M200PMB support.

Directionable monitor module with 10 input circuits for monitoring of devices for alarm start or technical signal that provide a voltage free contact. Includes a short-circuit isolator. Allows the connection of open or closed loop devices (With closed loop, 5 input limited). Its connected directly to a communication loop and its compatible with all MorleyIAS® analogical panels. Provides with micropush buttons for directioning and tricolour LED indicators. Occupies 10 consecutive directions in the loop module.

Directionable control module with 6 output circuit in the form of NA/NC relay. Recommended for the activation, through communication loop, doors, fire dampers, lifts stop, etc... Includes a short-circuit insulator. Its connected directly to an analogical communication loop and its compatible with all MorleyIAS® analogical panels. Provided with micro-push buttons for directioning and tricolour LED indicator. Occupies 6 consecutive directions of the loop module.

Directionable control module for MorleyIAS® analogical system, with 6 output circuits for systems activation of signalling or notification, solenoids, etc. through own analogical loop. Easy directioning through two rotary push buttons (01-99), occupies 6 consecutives directions in the loop modules. Provides with LED for status indication of the module.

Directionable multi-module for MorleyIAS® analogical system, with 6 zones that allows to connect up to 20 detectors ECO1000 for each zone. Easy directioning through two rotary push buttons, occupies 6 consecutives directions of loop modules.

Standard base for ECO100 range.

Surface socket with tube input up to 20mm. Adaptes to ECO100B base.

Wireless remote test unit for ECO-100 range of detectors through laser beam. The test unit emits a laser beam with a encoded sequence to activate the detector.

Conventional optic smoke detector of slim-line perfil with LED indicators. Monitoring function through LED blinking. Camera design that reduces dirt effects and available without necessity of special tools for maintenance. Incorporated microsensor, activable through laser beams codified for remote test. Pilote action indicator output. Requires ECO1000B base. Special color for detectors and bases: detector housing and base with color treatment for special installations (Cinemas, clubs, optic laboratories, dark rooms, etc.) Only available on request.

Conventional Optic-thermal smoke detector (58 °C … 8 °C/minutes) with LED signals. Monitoring function through LED blinking. Camera design that reduces dirt effects and available without necessity of special tools for maintenance. Incorporated microsensor, activable through laser beams codified for remote test. Pilote action indicator output. Requires ECO1000B base.

Conventional detector of fixed temperature at 58ºC with LED signals. Monitoring function through LED blinking. Incorporated microsensor, activable through laser beams codified for remote test. Pilote action indicator output. Requires ECO1000B base.

Conventional detector of high fixed temperature (78ºC) with LED signals. Monitoring function through LED blinking. Incorporated microsensor, activable through laser beams codified for remote test. Pilote action indicator output. Requires ECO1000B base.

Conventional Optic-thermal smoke detector (58 °C … 8 °C/minutes) with LED signals. Monitoring function through LED blinking. Camera design that reduces dirt effects and available without necessity of special tools for maintenance. Incorporated microsensor, activable through laser beams codified for remote test. Pilote action indicator output. Requires ECO1000B base.

Microprocessed compact fire detection panel of 12 zones. Distinghuises between alarm detector or push buttons by zone. Up to 32 ECO1000 detectors by zone. Includes power supply, 2 monitored siren output, general alarm relay, general failure relay, general indicators (Fore, failure, service, CPU failt, general desconnection, in test, fault in sounders circuit), configurable delays, 24V and zone indicators (Alarm, fault, desconnection, test). Batteries not included. Language: Portuguese.