English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 786
    NOTIFIER® ID3000 Kit with 6 Loops expandable to 8 in a Large Cabinet [ID3008-6-001]
    NOTIFIER® ID3000 Kit with 6 Loops expandable to 8 in a Large Cabinet
    Ref.: ID3008-6-001
    Mounting kit for ID3000 system equipped with 6 analogical loops and with the possibility to extend to 8 loops. Requires batteries. Includes: 1 x 020-538-001 (Basic equipment with 2 loops).1 x 020-588 (2 loops standard card). 1 x 020-549 (2 microprocessor loops card) 1 x 020-474-009 (Two parts cabin and double bottom). 1 x 020-480-009 (Front cover). 1 x 020-485-009 (Blind cover). 1 x 020-481-009 (Front cover). 1 x 020-579 (4,5 ...7A Power supply). 1 x 020-543 ( Tension converter module for 020-579).
    V.A.T. included
    11,817.62 €
    NOTIFIER® ID3000 Kit with 8 Loops in a Large Cabinet [ID3008-8-001]
    NOTIFIER® ID3000 Kit with 8 Loops in a Large Cabinet
    Ref.: ID3008-8-001
    Mounting kit for ID3000 system equipped with 8 analogical loops. Requires batteries. Includes: 1 x 020-538-001 (Basic equipment with 2 loops).1 x 020-588 (2 loops standard card). 1 x 020-549 (2 microprocessor loops card) 1 x 020-474-009 (Two parts cabin and double bottom). 1 x 020-480-009 (Front cover). 1 x 020-485-009 (Blind cover). 1 x 020-481-009 (Front cover). 1 x 020-579 (4,5 ...7A Power supply). 1 x 020-543 ( Tension converter module for 020-579).
    V.A.T. included
    12,950.41 €
    NOTIFIER® ID3000 Standard Cabinet [020-472-009]
    NOTIFIER® ID3000 Standard Cabinet
    Ref.: 020-472-009
    Standard metal cabin only for ID3000 panels with capacity to host 020-538-001 basic equipment, configured for a maximum of 4 loops and 3A integrated power supply, or for a maximum of 8 loops with 7A power supply hosted in independent cabin. Capacity to host 2 batteries of 12VDC, 12Ah. Requires 020-480-009 front cover.
    V.A.T. included
    Consult
    NOTIFIER® ID3000 Two Parts Cabinet [020-474-009]
    NOTIFIER® ID3000 Two Parts Cabinet
    Ref.: 020-474-009
    Two parts metal cabin only for ID3000 panels with capacity to host 020-538-001 basic equipment, configured for 2 or 8 loops with power supply from 3 to 4,5A integrated in the same cabin with additional space to install 020-708-009 printer or batteries. Capacity to host 2 batteries of 12VDC 26Ah. Requires 020-480-009 and 020-481-009 front cover.
    V.A.T. included
    Consult
    NOTIFIER® Interface for ID2net Network Connection by Optic Fiber [020-643]
    NOTIFIER® Interface for ID2net Network Connection by Optic Fiber
    Ref.: 020-643
    Interface card that allows to connect ID3000 panels with ID2net network through optic fiber cable, recommended for distances up to 500 meters or for industrial environments. Its connected to 020-647 card. Includes regeneration circuit and signal amplification. Maximum distance, depend of the fibre type, between hubs of 3000 meters. Requires 020-647 and multimode fibre of 62,5/125?m with maximum attenuation of 8dB or 50/125 ?m with a maximal attenuation of 4,2dB with ST connector.
    V.A.T. included
    1,191.79 €
    NOTIFIER® Interface for ID2net Network Connection [020-647]
    NOTIFIER® Interface for ID2net Network Connection
    Ref.: 020-647
    Interface card that allows to contect ID3000 centraks with ID2net network through twisted pair cable. Can be connected to CPU of ID3000 system and includes insulation of the electric circuit between hubs and RS232 interface for self-testung. Maximum distance between hubs, depend of the wire used, up to 1,000 meters,
    V.A.T. included
    2,171.19 €
    NOTIFIER® Interface for Network Extension ID2net [002-467]
    NOTIFIER® Interface for Network Extension ID2net
    Ref.: 002-467
    ID2net Network interface that allows to increase the wire distance between panels and connect a 002-452-001 repeater at any point of the network. Includes a metal cabin, network interface card and capacity to host two 12V 7A/h batteries and a source of power supply 020-648 (Not included). Requires 020-643 card for network connection through optic fiber and a RS232 card for repeater connection 002-452-001. Requires two 12V 7A/h batteries and a source of power supply 020-648.
    V.A.T. included
    Consult
    NOTIFIER® Interface Module [S300ZDU]
    NOTIFIER® Interface Module
    Ref.: S300ZDU
    Display interface module that allows to view the direction of the alarm detector.
    V.A.T. included
    Consult
    NOTIFIER® IP Module [TG-IP1-SEC]
    NOTIFIER® IP Module
    Ref.: TG-IP1-SEC
    Redirector device of RS232 port of the panel to the graphic management software GT, through IP protocol. Compatible with Ethernet networks at 10 and 100 MHz. Dispose of port input RS232, Ethernet connection and 24V power supply.
    V.A.T. included
    693.25 €
    NOTIFIER® IP65 Socket with Base for Sounders and Flashes [WRR]
    NOTIFIER® IP65 Socket with Base for Sounders and Flashes
    Ref.: WRR
    IP65 Red socket for tube input with base incoporated for directionable sounders and flashes. With B501AP base.
    V.A.T. included
    27.85 €
    NOTIFIER® Isolator Module [M700X]
    NOTIFIER® Isolator Module
    Ref.: M700X
    Insulator module for protection of analogical loop short circuit. M700X module includes a insulator circuit that, in case of anomaly detection or loop short circuit, isolate the zone comprised between two insulator modules and protect the rest of the installation to stay operative. It is restored automatically when the anomaly disappeared in the loop. Its recommended to install a M700X each 20 devices. Allows surface mounting with M200SMB or SMB6-V0 box. DIN standard guide through M200E-DIN support or in any other surface with M200PMB support.
    V.A.T. included
    Consult
    NOTIFIER® LEDs Module [020-548]
    NOTIFIER® LEDs Module
    Ref.: 020-548
    LEDs module for power supply status indication 020-579 if its mounted in cabin ref 020-541-009.
    V.A.T. included
    Consult
    NOTIFIER® Link for Power Amplifier [002-629]
    NOTIFIER® Link for Power Amplifier
    Ref.: 002-629
    Device that increase the loop capacity to connect more power supply equipment as loop or sounders, flash or analogical barriers, Each 002-629 raise of 1 amp the loop capacity. Its recommended to no install more than two IDP-LB1 in each loop.
    V.A.T. included
    Consult
    NOTIFIER® LTS Control Unit for 2 km Cable by 1 Channel [LTS200SC]
    NOTIFIER® LTS Control Unit for 2 km Cable by 1 Channel
    Ref.: LTS200SC
    Sensor control unit with 1 channel up to 2Km. Provided in Cabin for wall mounting, equipped with 32 relay card and PLC Modbus. Requires 24VDC Power supply, according to EN54-4. Also available for rail mounting of 19" (Consult with NOTIFIER).
    V.A.T. included
    Consult
    NOTIFIER® LTS Control Unit for 2 km Cable by 2 Channels [LTS200TC]
    NOTIFIER® LTS Control Unit for 2 km Cable by 2 Channels
    Ref.: LTS200TC
    Sensor control unit similar to LTS200SC but with two channels up to 2km each one (Total 4km). Requires power supply of 24VDC. Also available for rail mounting of 19" (Consult with NOTIFIER).
    V.A.T. included
    Consult
    NOTIFIER® LTS Control Unit for 4 km Cable by 1 Channel [LTS240SC]
    NOTIFIER® LTS Control Unit for 4 km Cable by 1 Channel
    Ref.: LTS240SC
    Sensor control unit similar to LTS200SC but with one channels up to 4km. Requires power supply of 24VDC. Also available for rail mounting of 19" (Consult with NOTIFIER).
    V.A.T. included
    Consult
    NOTIFIER® LTS Control Unit for 4 km Cable by 2 Channels [LTS240TC]
    NOTIFIER® LTS Control Unit for 4 km Cable by 2 Channels
    Ref.: LTS240TC
    Sensor control unit similar to LTS200SC but with two channels up to 4km each one (Total 8km). Requires power supply of 24VDC. Also available for rail mounting of 19" (Consult with NOTIFIER).
    V.A.T. included
    Consult
    NOTIFIER® Metal Box for Multi-Module [002-439]
    NOTIFIER® Metal Box for Multi-Module
    Ref.: 002-439
    Metal box for multi-modules surface mounting according to EN54-17 and EN54-18.
    V.A.T. included
    Consult
    NOTIFIER® Mini Monitor Module [NFX-MM1M]
    NOTIFIER® Mini Monitor Module
    Ref.: NFX-MM1M
    Mini directionable monitor module with 1 supervised input circuit for monitorisation of alarm devices or technic signal that provides voltage-free contact. Its connected directly to a analogical communicaction loop. Incorporates decadic direction (01-159)
    V.A.T. included
    112.68 €
    NOTIFIER® Modbus Panels Protocol Converter [IBOX-MBS-PRL]
    NOTIFIER® Modbus Panels Protocol Converter
    Ref.: IBOX-MBS-PRL
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor a unique panel with two loops and 159 sensors + 159 modules, 10 sub dirrections for each device and 64 zones. Requires 24Vdc amd RS232 port.
    V.A.T. included
    Consult
    NOTIFIER® Module of 1 Zone to Expand Park™ Panels [P-100]
    NOTIFIER® Module of 1 Zone to Expand Park™ Panels
    Ref.: P-100
    1 zone module to expand Park™ carbon monoxide detection panels. Each module support a maximum of 16 detectors and is provided with 10 status LEDs, 2 level relays and 1 alarm relay.
    V.A.T. included
    206.68 €
    NOTIFIER® Module with 2 Inputs and 1 Output [M721E]
    NOTIFIER® Module with 2 Inputs and 1 Output
    Ref.: M721E
    Directionable monitor and control module. Dispose of 2 monitored input circuits for monitoring of alarm equipment and technical signs with free voltage contact and 1 relay output circuit with free voltage contact. Includes a isolator circuit of loop short circuit, LEDs for status indications from the module and dedicated direction selector (01-159). Allows surface mounting with M200SMB or SMB6-V0 box, DIN standard guide through M200E-DIN support or in any other surface with M200PMB support. Compatible with OPAL 159+159 and CLIP 99+99 protocol.
    V.A.T. included
    154.48 €
    NOTIFIER® Monitor Module for Conventional Zones with Resistance [M710-CZR]
    NOTIFIER® Monitor Module for Conventional Zones with Resistance
    Ref.: M710-CZR
    Directionable monitor module with 1 supervised input circuit with final line resistor for monitoring of 2 threads conventionals detectors and intrinsic security detectors. Includes isolator circuit of loop short circuit, LED for status indications from the module and dedicated direction selector (01-159). Allows surface mounting with M200SMB or SMB6-V0 box, DIN standard guide through M200E-DIN support or in any other type of surface with M200PMB.
    V.A.T. included
    Consult
    NOTIFIER® Monitor Module for Conventional Zones [M710-CZ]
    NOTIFIER® Monitor Module for Conventional Zones
    Ref.: M710-CZ
    Directionable monitor module with 1 supervised input circuit without final line resistor for monitoring of 2 threads conventionals detectors and intrinsic security detectors. Includes isolator circuit of loop short circuit, LED for status indications from the module and dedicated direction selector (01-159). Allows surface mounting with M200SMB or SMB6-V0 box, DIN standard guide through M200E-DIN support or in any other type of surface with M200PMB.
    V.A.T. included
    Consult
    SYSAWAY© 2024 All rights reserved