English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 786
    NOTIFIER® Monitor Module with 1 Input [M710E]
    NOTIFIER® Monitor Module with 1 Input
    Ref.: M710E
    Directionable monitor module with 1 supervised input circuit for monitoring of alarm devices or technical signal that provides voltage free contact. Includes a isolator circuit of loop short circuit, LED for status indication from the module and a dedicated direction selector (01-159). Allows surface mounting with M200SMB or SMB6-V0 box, DIN standard guide through M200E-DIN support or in any other type of surface with M200PMB support. Compatible with OPAL 159+159 and 99+99 CLIP protocol.
    V.A.T. included
    101.76 €
    NOTIFIER® Monitor Module with 1 Output - 240VCA [M701-240-DIN]
    NOTIFIER® Monitor Module with 1 Output - 240VCA
    Ref.: M701-240-DIN
    Directionable control module able to do activation/desactivation of manoeuvre through communication loop systems that works with 240VCA tension, through NA/NC voltage free tension. Includes isolator circuit of loop short circuit, LED for status indications from the module and dedicated direction selector (01-159). For DIN standard guide mounting.
    V.A.T. included
    Consult
    NOTIFIER® Monitor Module with 1 Output - 240VCA [M701-240]
    NOTIFIER® Monitor Module with 1 Output - 240VCA
    Ref.: M701-240
    Directionable control module able to do activation/desactivation of manoeuvre through communication loop systems that works with 240VCA tension, through NA/NC voltage free tension. Includes isolator circuit of loop short circuit, LED for status indications from the module and dedicated direction selector (01-159).
    V.A.T. included
    Consult
    NOTIFIER® Monitor Module with 1 Output [M701E]
    NOTIFIER® Monitor Module with 1 Output
    Ref.: M701E
    Directionable control module for activation of signal systems, doors, fire dampers, solenoids,etc...Provides 1 configurable output circuit, throughmicroswitch, as supervised output with RFL or in relay with voltage free contact. Includes isolator circuit, LED for status indications from the module and dedicated direction selector (01-159). Allows suface mounting with M200SMB or SMB6-V0 box, DIN standard guide through M200E-DIN or any other type of surface with M200PMB support. Compatible with OPAL 159+159 and CLIP 99+99 protocols.
    V.A.T. included
    116.31 €
    NOTIFIER® Monitor Module with 10 Inputs [NFXI-MM10]
    NOTIFIER® Monitor Module with 10 Inputs
    Ref.: NFXI-MM10
    Directionable monitor module with OPAL protocol of 10 input circuits for monitoring equipment of alarm starting or technical signals that provides a free voltage contact. Includes a short circuit insulator. Allows the connection of open or closed loop devices (With closed loop, inputs are limited to 5). Its connected directly to a communication loop and its compatible with all NOTIFIER® analogical panels. Provided with a microswitch for dedicated direction (1-159) and tricolour LED indicator controlled by the panel. Compatible with OPAL 159+159 and CLIP 99+99 protocol. In CLIP protocol use 10 consecutive loop module directions. In OPAL protocol only use 1 direction and subdirection to complete remaining directions. For its proper function, requires a surface mounting box 002-439.
    V.A.T. included
    460.78 €
    NOTIFIER® Monitor Module with 2 Inputs [M720E]
    NOTIFIER® Monitor Module with 2 Inputs
    Ref.: M720E
    Directionable monitor module with 2 supervised input circuits for monitoring of alarm devices or technical signal that provides voltage free contact. Includes a isolator cicuit of loop short circuit, LEDs for status indications from the module and dedicated direction selector (01-159). Allows surface mounting with M200SMB or SMB6-V0 box, DIN standard guide through M200E-DIN support or in any other type of surface with M200PMB. Compatible with OPAL 159+159 and 99+99 CLIP protocol.
    V.A.T. included
    123.57 €
    NOTIFIER® Monitor Module with 6 Inputs for Conventional Zones [CZ-6]
    NOTIFIER® Monitor Module with 6 Inputs for Conventional Zones
    Ref.: CZ-6
    Directionable monitor module with 6 input circuits to interconnect 2 wires conventional detectors. Allows connections of open or closed loop devices (With closed loop, 3 inputs limited). Directly connected to a communication loop and compatible with all NOTIFIER® analogical panels. Provided with a microswitch for dedicated direction (01-99) and LED alarm indication. Occupy 6 consecutive directions in loop module.
    V.A.T. included
    Consult
    NOTIFIER® MULTISCAN++ Control Panel for 16 Detectors [ST.MTS/S1-16B]
    NOTIFIER® MULTISCAN++ Control Panel for 16 Detectors
    Ref.: ST.MTS/S1-16B
    MULTISCAN++ microprocessed control panel for 16 detectors with 2 RS485 loops. 2 loops with open RS485 protocol (EIA-485). Galvanically isolated loops. Ports: 2 x RS485, 1 x RS 232 (for configuration from PC.). Graphic display. Up to 256 inputs through STG / IN8S modules. Up to 16 open collector (O / C) outputs through STG / OUT16S modules. Relay outputs through additional STG / 8REL modules. 8 preconfigured relays in the control unit. 8 4-20 mA inputs are included for detection on the panel itself. Remote modules require external power supplies with project capacity. Includes ST.G / MTSS1-CONF programming upload and download software. Requires two 12 Vdc 7 Ah batteries (not included). Expandable to 4 loops using STG / SER cards.
    V.A.T. included
    3,773.63 €
    NOTIFIER® MULTISCAN++ Control Panel for 32 Detectors [ST.MTS/S1-32B]
    NOTIFIER® MULTISCAN++ Control Panel for 32 Detectors
    Ref.: ST.MTS/S1-32B
    MULTISCAN++ microprocessed control unit for 32 detectors with 2 RS485 loops. 2 loops with open RS485 protocol (EIA-485). Galvanically isolated loops. Ports: 2 x RS485, 1 x RS 232 (for configuration from PC.). Graphic display. Up to 256 inputs through STG / IN8S modules. Up to 32 open collector (O / C) outputs via STG / OUT16S modules. Relay outputs through additional STG / 8REL modules. 8 preconfigured relays in the control unit. 8 4-20 mA inputs are included for detection on the panel itself. Remote modules require external power supplies with project capacity. Includes ST.G / MTSS1-CONF programming upload and download software. Requires two 12 Vdc 7 Ah batteries (not included). Expandable to 4 loops using STG / SER cards.
    V.A.T. included
    4,716.86 €
    NOTIFIER® MULTISCAN++ Panel for 128 Detectors [ST.MTS/S1-128B]
    NOTIFIER® MULTISCAN++ Panel for 128 Detectors
    Ref.: ST.MTS/S1-128B
    MULTISCAN++ Microprocessed panel for 128 detectors with 4 RS485 loop. 4 links with RS485 open protocol (EIA-485). Galvanically isolated loops. Ports: 4 x RS485, 1 x RS232 (Configuration from the PC). Graphic display. Up to 256 inputs though STG/IN8S module. Up to 256 colector open output (O/C) through STG/OUT16S. Outputs relay through additional STG/8REL module. 8 pre-configured relays in the control unit. Includes 8 inputs of 4-20mA for detection in the own panel. Remote module requires an extern source of power supply with capacity depending on the project. Includes download programmation software ST.G/MTSS1-CONF. Requires two 12VDC 7Ah batteries (Not included). Expandable to 4 loops through STG/SER cards.
    V.A.T. included
    6,642.43 €
    NOTIFIER® MULTISCAN++ Panel for 256 Detectors [ST.MTS/S1-256B]
    NOTIFIER® MULTISCAN++ Panel for 256 Detectors
    Ref.: ST.MTS/S1-256B
    MULTISCAN++ Microprocessed panel for 256 detectors with 4 RS485 loop. 4 links with RS485 open protocol (EIA-485). Galvanically isolated loops. Ports: 4 x RS485, 1 x RS232 (Configuration from the PC). Graphic display. Up to 256 inputs though STG/IN8S module. Up to 256 colector open output (O/C) through STG/OUT16S. Outputs relay through additional STG/8REL module. 8 pre-configured relays in the control unit. Includes 8 inputs of 4-20mA for detection in the own panel. Available in 19" rail version 6U. Requires 24Vdc extern power supply. Remote module requires an extern source of power supply with capacity depending on the project. Includes download programmation software ST.G/MTSS1-CONF. Requires two 12VDC 7Ah batteries (Not included). Expandable to 4 loops through STG/SER cards
    V.A.T. included
    7,306.66 €
    NOTIFIER® MULTISCAN++ Panel for 64 Detectors [ST.MTS/S1-64B]
    NOTIFIER® MULTISCAN++ Panel for 64 Detectors
    Ref.: ST.MTS/S1-64B
    MULTISCAN++ Microprocessed panel for 64 detectors with 2 RS485 loop. 2 links with RS485 open protocol (EIA-485). Galvanically isolated loops. Ports: 2 x RS485, 1 x RS232 (Configuration from the PC). Graphic display. Up to 256 inputs though STG/IN8S module. Up to 256 colector open output (O/C) through STG/OUT16S. Outputs relay through additional STG/8REL module. 8 pre-configured relays in the control unit. Includes 8 inputs of 4-20mA for detection in the own panel. Remote module requires an extern source of power supply with capacity depending on the project. Includes download programmation software ST.G/MTSS1-CONF. Requires two 12VDC 7Ah batteries (Not included). Expandable to 4 loops through STG/SER cards.
    V.A.T. included
    5,978.15 €
    NOTIFIER® Network Card [PRL-P2P]
    NOTIFIER® Network Card
    Ref.: PRL-P2P
    Card for ID2net network connection of NOTIFIER® PEARL panels.
    V.A.T. included
    Consult
    NOTIFIER® NFS Microprocessed Conventional Panel - 2 Zones [002-477-229]
    NOTIFIER® NFS Microprocessed Conventional Panel - 2 Zones
    Ref.: 002-477-229
    Microprocessed conventional panel with 2 zones with 2 monitored and configurable siren outputs and 2 remote inputs. Allows the connection of 020-713 relay card (Optional). Batteries not included.
    V.A.T. included
    Consult
    NOTIFIER® NFS Microprocessed Conventional Panel - 4 Zones [002-477-249]
    NOTIFIER® NFS Microprocessed Conventional Panel - 4 Zones
    Ref.: 002-477-249
    Microprocessed conventional panel with 4 zones with 2 monitored and configurable siren outputs and 2 remote inputs. Allows the connection of 020-713 relay card (Optional). Batteries not included.
    V.A.T. included
    Consult
    NOTIFIER® NFS Microprocessed Conventional Panel - 8 Zones [002-477-289]
    NOTIFIER® NFS Microprocessed Conventional Panel - 8 Zones
    Ref.: 002-477-289
    Microprocessed conventional panel with 8 zones with 2 monitored and configurable siren outputs and 2 remote inputs. Allows the connection of 020-713 relay card (Optional). Batteries not included.
    V.A.T. included
    Consult
    NOTIFIER® NFS-SUPRA 12-Zone Microprocessed Conventional Panel [NFS12-Supra]
    NOTIFIER® NFS-SUPRA 12-Zone Microprocessed Conventional Panel
    Ref.: NFS12-Supra
    Microprocessed central fire detection 12 zones. Distinguish between detector or button alarm by zone. Up to 32 detectors of the 800 series per zone. It incorporates power supply with 2 outputs, supervised sirens, general alarm relay, general fault relay, general indicators (fire, fault, service, CPU fault, general disconnection, under test, siren circuit fault), digital input for reset remote, configurable delays, 24V fixed auxiliary output, 24 VDC resettable output and zone indicators (alarm, fault, disconnection, test). Optionally, it allows to connect the following modules: up to 3 cards of 4 programmable relays VSN-4REL, an RS232 VSN-232 card, an Ethernet IP card TG-IP1-SEC and a card with IP / GPRS communicator UCIP / UCIP-GPRS.
    V.A.T. included
    579.54 €
    NOTIFIER® NFS-SUPRA 4-Zone Microprocessed Conventional Panel [NFS4-Supra]
    NOTIFIER® NFS-SUPRA 4-Zone Microprocessed Conventional Panel
    Ref.: NFS4-Supra
    Microprocessed central fire detection 4 zones. Distinguish between detector or button alarm by zone. Up to 32 detectors of the 800 series per zone. It incorporates power supply with 2 outputs, supervised sirens, general alarm relay, general fault relay, general indicators (fire, fault, service, CPU fault, general disconnection, under test, siren circuit fault), digital input for reset remote, configurable delays, 24V fixed auxiliary output, 24 VDC resettable output and zone indicators (alarm, fault, disconnection, test). Optionally, it allows to connect the following modules: up to 3 cards of 4 programmable relays VSN-4REL, an RS232 VSN-232 card, an Ethernet IP card TG-IP1-SEC and a card with IP / GPRS communicator UCIP / UCIP-GPRS.
    V.A.T. included
    401.51 €
    NOTIFIER® NFS-SUPRA 8-Zone Microprocessed Conventional Panel [NFS8-Supra]
    NOTIFIER® NFS-SUPRA 8-Zone Microprocessed Conventional Panel
    Ref.: NFS8-Supra
    Microprocessed central fire detection 8 zones. Distinguish between detector or button alarm by zone. Up to 32 detectors of the 800 series per zone. It incorporates power supply with 2 outputs, supervised sirens, general alarm relay, general fault relay, general indicators (fire, fault, service, CPU fault, general disconnection, under test, siren circuit fault), digital input for reset remote, configurable delays, 24V fixed auxiliary output, 24 VDC resettable output and zone indicators (alarm, fault, disconnection, test). Optionally, it allows to connect the following modules: up to 3 cards of 4 programmable relays VSN-4REL, an RS232 VSN-232 card, an Ethernet IP card TG-IP1-SEC and a card with IP / GPRS communicator UCIP / UCIP-GPRS.
    V.A.T. included
    521.62 €
    NOTIFIER® Optical Analogical Intrinsically Safe Detector [IDX-751 AE]
    NOTIFIER® Optical Analogical Intrinsically Safe Detector
    Ref.: IDX-751 AE
    Optical analogical smoke detectors intrinsically safe “EEX ia ”. analogical detection with signal processing algorithms grasped by the detector. Ideal for classified zones installations (Zones 0, 1 and 2). Includes manal and automatic test function and dedicated manual directioning (01-99). Includes two LEDs for alarm indication and a remote indicator output. Only compatible with CLIP 99+99 protocol. Requires B501AP base, Y72221 galvanic isolator and IST200E converter interface for each detection line.
    V.A.T. included
    710.79 €
    NOTIFIER® Optical Smoke Detector [SD-851E A]
    NOTIFIER® Optical Smoke Detector
    Ref.: SD-851E A
    Conventional optic smoke detector. Recommended for slow-progressing fires, with visible smoke particles. Includes compensation algorithms. Through S300RPTU wireless programmer it can be realized a test equipment, measurement of dirt levels, production date and last maintenance display , adjust the sensitivity, cancel the LED blinking and assign a directioning from 1 to 255. Includes a bicolor LED to indicate the sensor status and a remote indicator output. Requiers B401 or B401R base.
    V.A.T. included
    47.04 €
    NOTIFIER® Optical-Thermal Smoke Detector [SD-851TE A]
    NOTIFIER® Optical-Thermal Smoke Detector
    Ref.: SD-851TE A
    Optical-thermal conventional smoke detector. Recommended for slow and quick progressing fires. Includes a compension algorithm. Through S300RPTU wireless programmer it can be realize a test equipment, measurement of dirt levels, production date and last maintenance display , adjust the sensitivity, cancel the LED blinking and assign a directioning from 1 to 255. Includes a bicolor LED to indicate the sensor status and a remote indicator output. Requiers B401 or B401R base.
    V.A.T. included
    68.27 €
    NOTIFIER® Park™ CO Detection Panels - 1 Zone Expandable to 2 [PARK2000]
    NOTIFIER® Park™ CO Detection Panels - 1 Zone Expandable to 2
    Ref.: PARK2000
    Carbon monoxide detection panel of 1 zone expandable to 2 zones. Compact cabin that includes 1 control module, 1 P-100 module, source of power supply and a 24VDC emergency supply input. Level of extraction programming and alarm are configurable. 16 detectors by zone. Operating modes: economic, automatic, manual and test. Display and inficators: LCD 2x16 digits, 10 LEDs (Alarm, failure, economic, automatic, manual, test, triggered ventilation 1, triggered ventilation 2, service and selection). The panel can be power supply from 230VAC general network or from the extern auxiliary input of 24VDC.
    V.A.T. included
    816.47 €
    NOTIFIER® Park™ CO Detection Panels - 3 Zones Expandable to 5 [PARK5000]
    NOTIFIER® Park™ CO Detection Panels - 3 Zones Expandable to 5
    Ref.: PARK5000
    Carbon monoxide detection panel of 3 zones expandable to 5 zones. Compact cabin that includes 1 control module, 3 P-100 module, source of power supply and a 24VDC emergency supply input. Level of extraction programming and alarm are configurable. 16 detectors by zone. Operating modes: economic, automatic, manual and test. Display and inficators: LCD 2x16 digits, 10 LEDs (Alarm, failure, economic, automatic, manual, test, triggered ventilation 1, triggered ventilation 2, service and selection). The panel can be power supply from 230VAC general network or from the extern auxiliary input of 24VDC.
    V.A.T. included
    1,225.55 €
    SYSAWAY© 2024 All rights reserved