English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 786
    Pressure Switch for Fluids or Gases Supervision [EPS40-1]
    Pressure Switch for Fluids or Gases Supervision
    Ref.: EPS40-1
    Pressure switch for the supervision of liquids or gas hosted in pipes or deposits at high or low pressure (40-100PSI), with switched circuit with voltage free contacts (C/NA/NC).
    V.A.T. included
    Consult
    Pressure Switch for Fluids Supervision [EPS10-1]
    Pressure Switch for Fluids Supervision
    Ref.: EPS10-1
    Pressure switch for liquids supervision at low pressure (10PSI), Switched circuit with voltage-free contacts (C/NA/NC).
    V.A.T. included
    Consult
    Protector de Intemperie pera Detectores de Llama//Weather Protector for Flame Detectors
    Weather Protector for Flame Detectors
    Ref.: 777163
    Accessory design to protect the detector from the rain, snow and high temperature of solar radiation. Spectrex detectors can works without protection to ambient temperature up to 75ºC.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus BACnet [IBOX-BAC-NID3000]
    Protocol Converter for NOTIFIER® Panel to Modbus BACnet
    Ref.: IBOX-BAC-NID3000
    Gateaway that convert ID3000 panel protocol to BACnet IP using ANSI X3.4 standard characters. Permit to monitor a unique panel with 8 loops each one with up to 99 sensors + 99 modules and 255 zones. Requires 24Vdc (150mA) and RS232 port available in ID3000 panel (Its recommended RS232 port for 020-478 card).
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus for 16 PEARL Panels [IBOX-MBS-PRLNET16C]
    Protocol Converter for NOTIFIER® Panel to Modbus for 16 PEARL Panels
    Ref.: IBOX-MBS-PRLNET16C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 16 panels with 2 loops and 159 sensors + 159 modules, 10 sub dirrections for each device and 64 zones. Requires 24Vdc amd RS232 port.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus for 5 PEARL Panels [IBOX-MBS-PRLNET5C]
    Protocol Converter for NOTIFIER® Panel to Modbus for 5 PEARL Panels
    Ref.: IBOX-MBS-PRLNET5C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 5 panels with 2 loops and 159 sensors + 159 modules, 10 sub dirrections for each device and 64 zones. Requires 24Vdc amd RS232 port.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-ID2net16C]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-ID2net16C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 16 panels with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-ID2net2C]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-ID2net2C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 2 panels with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-ID2net32C]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-ID2net32C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 32 panels with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-ID2net5C]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-ID2net5C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 5 panels with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-ID2net64C]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-ID2net64C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 63 panels with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-NID3K]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-NID3K
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor a unique panel with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Recambio de Cabeza para Detector de Aspiración NOTIFIER® FAAST™//NOTIFIER® FAAST™ Aspiration Detector Head Replacement
    NOTIFIER® FAAST™ Aspiration Detector Head Replacement
    Ref.: F-SEN-NFX
    Replacement of detector head (units for Notifier model connected to the loop).
    V.A.T. included
    472.89 €
    Recambio para Sensor de Aspiración NOTIFIER® FAAST™//NOTIFIER® FAAST™ Suction Sensor Replacement
    NOTIFIER® FAAST™ Suction Sensor Replacement
    Ref.: F-SEN-SSE
    Replacement high sensitivity sensor head FAAST LT. The smoke sensor (F-SEN-SSE) is a high sensitivity photoelectric smoke sensor developed specifically for the FAAST LT-200 range of smoke detectors. This sensor is suitable only as a spare part for FAAST LT-200 detectors.
    V.A.T. included
    472.89 €
    Recessed Box Accessory for PAN1-PLUS [PAN1-PLUS-INC]
    Recessed Box Accessory for PAN1-PLUS
    Ref.: PAN1-PLUS-INC
    Recessed box for PAN1-PLUS.
    V.A.T. included
    13.65 €
    Reductor de Entrada de Cables//Cable Entry Reducer
    Cable Entry Reducer
    Ref.: ADU300530
    Cable entry reducer from M25 (male) to 3/4'' NPT (female).
    V.A.T. included
    Consult
    Remote Repeater of the States and Function Keys of the NOTIFIER® RP1 [RP1R-RPT]
    Remote Repeater of the States and Function Keys of the NOTIFIER® RP1
    Ref.: RP1R-RPT
    Remote repeater for central RP1R-SUPRA detection and extinction via VSN-485. Requires external 24 VDC power. In accordance with Regulation (EU) No 305/2011 of the European Parliament regarding construction products.
    V.A.T. included
    472.52 €
    Remplacement Pack with 5 Joint for Base IP66 [PS189]
    Remplacement Pack with 5 Joint for Base IP66
    Ref.: PS189
    Pack of 5 joints for IP66 base for replacement of ENScape CWSx-Ryzz range devices.
    V.A.T. included
    27.96 €
    Remplacement Pack with 5 O-Rings for Base IP65 [PS188]
    Remplacement Pack with 5 O-Rings for Base IP65
    Ref.: PS188
    Pack of 5 O-rings for IP65 base, replacement of ENScape CWSx-Ryzz range devices.
    V.A.T. included
    Consult
    Remplacement Pack with 5 Red High Bases IP65 [CWR]
    Remplacement Pack with 5 Red High Bases IP65
    Ref.: CWR
    Pack of 5 red high bases IP65 for replacement of ENScape CWSx-Ryzz range devices.
    V.A.T. included
    39.93 €
    Repeater Panel for NOTIFIER® ID3000 Series Panels. [002-452-001]
    Repeater Panel for NOTIFIER® ID3000 Series Panels.
    Ref.: 002-452-001
    Remote reapeter panel with LCD grafic screen 240 x 64 pixels (6 lines and 40 alphanumeric digits), compatible with ID300 serie of analogical panels. Provides warning device, membrane keypad protected with an access key and LEDS to control system status. Its connected the optional interface range 020-479 of ID3000 analogical panels. Requires extern power supply at 24VDC, 150mA, Requires 020-479 card for each panel.
    V.A.T. included
    2,467.66 €
    Repetidor de Señal HONEYWELL™ Vía Radio [NRX-REP]
    Repetidor de Señal HONEYWELL™ Vía Radio
    Ref.: NRX-REP
    The function of the NRX-REP is to extend the RF signal range of the Agile radio fire detection system, designed for use with the NRXI-GATE gateway and mesh operation (Mesh). Includes 4 CR123A batteries. Requires base B501RF. Compatible with OPAL protocol (159 + 159) and CLIP (99 + 99).
    V.A.T. included
    196.66 €
    Replacement Ball Joint for HONEYWELL™ 400N Retainers [960110]
    Replacement Ball Joint for HONEYWELL™ 400N Retainers
    Ref.: 960110
    Rótula de recambio para retenedores de 400N. Dimensiones: 55x55x50mm. Diámetro plato: 55mm.
    V.A.T. included
    33.46 €
    Replacement Ball Joint for HONEYWELL™ 850N Retainers [960114]
    Replacement Ball Joint for HONEYWELL™ 850N Retainers
    Ref.: 960114
    Rótula de recambio para retenedor de 850N. Dimensiones: 75x75x55mm. Diámetro plato: 65mm.
    V.A.T. included
    42.25 €
    SYSAWAY© 2024 All rights reserved