12 zones and 1 exit on the main board. Expandable up to 20 zones by external expanders type RIO, by 1 bus of expansion RS485, or via radio by expanders type Portal RF (up to 8). Intellibus high-speed bus for communicators (IP and GPRS), or camera detectors (up to 5, which do not occupy conventional zones). Integrated RTB telephone communicator and USB port for configuration. 3 partitions, 23 users, 500 event records, 2 available calendars, 5 links. Up to 4 keyboards, multi-user function. Optional access control for 4 readers with DCM expanders. Grade 2. Medium plastic box EU.

12 zones and 1 exit on the main board. Expandable up to 20 zones by external expanders type RIO, by 1 bus of expansion RS485, or via radio by expanders type Portal RF (up to 8). Intellibus high-speed bus for communicators (IP and GPRS), or camera detectors (up to 5, which do not occupy conventional zones). Integrated RTB telephone communicator and USB port for configuration. 3 partitions, 23 users, 500 event records, 2 available calendars, 5 links. Up to 4 keyboards, multi-user function. Optional access control for 4 readers with DCM expanders. Grade 2. Metal box of reduced dimensions.

12 zones and 1 exit on the main board. Expandable up to 50 zones by means of external expanders type RIO, by 1 bus of expansion RS485, or via radio by expanders type Portal RF (up to 8). Intellibus high-speed bus for communicators (IP and GPRS), or camera detectors (up to 5, which do not occupy conventional zones). Integrated RTB telephone communicator and USB port for configuration. 4 partitions, 48 users, 500 event records, 4 available calendars, 5 links. Up to 4 keyboards, multi-user function. Optional access control for 8 readers with DCM expanders. Grade 2. Medium plastic box EU.

GALAXY™ RIO (Remote Input/Output). Provides zone and output expansion for GALAXY™ Systems. 8 fully programmable zones. 4 programmable outputs. Rotary switch for setting module address. PCB ONLY.

Boxed 2.75A PD6662:2004 (prEN50131-1:2004) Security Grade 3 intelligent Power Supply. Reports AC, Battery & Fuse status to the Galaxy control panels as well as tamper information over the Galaxy RS485 interface. A Galaxy RIO is integrated in the unit providing 8 programmable inputs and 4 outputs. Suitable for use in installations compliant to PD6662:2004 (prEN50131-1:2004) Security Grade 3, Environmental Class II and EN50131-1:1997 Security Grade 2, Environmental Class II.

GALAXY™ RIO (Remote Input/Output). Provides zone and output expansion for GALAXY™ Systems. 8 fully programmable zones. 4 programmable outputs. Tamper protection. Rotary switch for setting module address. PD6662:2004/2010, EN50131-1:2006 Security Grade 3, Environmental Class II.

Program for the graphic management of the AM-8200 series control panels with 2 to 8 analog loops. It allows you to reset, silence sirens, cancel / enable points and zones, know the location and status of the equipment in the different planes of an installation, import the description of the equipment of the control panel and create a maintenance file with the analog value of the sensors. To manage more than one exchange, the TGP-AM8200 expansion software is required.

Extension for graphic software TG-AM8200, with version 7 or higher, to manage a central AM-8200 more. One license is required per exchange.

Program for graphic management of VISION-PLUS2 panel, for representation and full system and commands controlled from a PC. Allows full control for panels and remote terminal emulation with access to menus and controls. Includes expiration management of PCI devices and automatic send of email.

Graphic management program for DX CONNECTION central of MorleyIAS. Allows graphic representation and system control from a PC, make resters, alarm silencing, cancel/activate points and zones, know the ubication and status of the devices in different levels of an installation, import the description of central devices and to create a maintenance archive with the analogue value of sensors. Includes expiration management of PCI devices and automatic send of email. To manage more than one central, requires a TGP-xxx extension license for each central.

Transparent diffuser head that allows to see the leds to check the operation of the smoke detectors. It is activated by light pressure against the ceiling. It has adjustable housing for the SOLO-A3 test gas container. The head is tilting to access the detector from any angle with respect to the vertical.

Transparent heat generating head that allows to see the firing LEDs to check the operation of the temperature detectors up to 90ºC / 194ºF. The heater is activated by infrared cell. Battery stop protection at 120 seconds, reset at 5 minutes. Powered by rechargeable batteries that fit between the head and the SOLO-100 extendable pole. Autonomy for 50 tests of 30 seconds. It consists of the following elements: 1 SOLO-460 (Heat generating head). 2 SOLO-770 (Batteries). 1 SOLO-725 (Rapid battery charger powered at 220 VAC or 12 V with cigarette lighter socket).

Heating circuit to connect to the barrier of the NFXI-BEAM series. Increases to some degrees the temperature of the detector to avoid condensation. To mount inside the barrier.

Heating circuit to connect to the reflector of the NFXI-BEAM barrier.Increases to some degrees the temperature of the detector to avoid condensation . To mount in the back of the detector. BEAM-HKR by reflector needed.

Compact beacon, which has been created and designed for a variety of signalling applications in different locations. The beacon features an array of six high output LEDs and is suitable for all intrinsically safe signalling applications including fire, security and process control.

Universal door / window transmitter. 2 programmable channels "built-in reed" and terminal for external connection. Report low battery in advance. Frequency 868.95MHz.

This module provides dual channel monitoring of normally open contact fire alarm and supervisory devices, and also provides single pole changeover contacts for the control of auxiliary devices such as fire shutters. Three tri-colour LED's are provided to indicate the status of each channel. LED's A and B refer to the two input channels. Each LED can be set by panel command to pulse green each time the module channel is polled. In case of an alarm the panel can switch the red indicator on continuously. The Yellow LED is controlled by the module and blinks to indicate an open circuit on the input circuit. This fault indication is always overridden by a panel command to turn the red LED on. LED C refers to the output channel. The LED can be set by panel command to pulse green each time the channel is polled. The LED will be switched continuously on Green by command from the control panel when the relay contacts are in the energised state. The TC809E1068 relay contact ratings are 30VDC, 2Amp or 30VAC, 0.5Amp (Resistive load).

Provides single channel monitoring of normally open contact fire alarm and supervisory devices. The TC809E1043 has a single tri-colour green/red/yellow LED, which can be set by panel command to pulse green each time the module is polled. In case of an alarm the panel can switch the red indicator on continuously. The Yellow LED is controlled by the module and blinks to indicate an open circuit on the input circuit. This fault indication is overridden by a panel command to turn the red LED on.

The TC810E1032 output module allows the control of auxiliary devices such as fire shutters or sounders. A single tri-colour LED indicates the status of the module. In normal conditions, the LED can be set by command from the control panel to blink green when the module is polled. When the control panel switches the relay to the energised state the LED can be set to continuous green. In the case of an open circuit or fault on the output circuit, the module will set the LED to blink yellow.

Provides single channel monitoring of normally open contact fire alarm and supervisory devices. The TC809E1050 has a single tri-colour green/red/yellow LED, which can be set by panel command to pulse green each time the module is polled. In case of an alarm the panel can switch the red indicator on continuously. The Yellow LED is controlled by the module and blinks to indicate an open circuit on the input circuit. This fault indication is overridden by a panel command to turn the red LED on.

Analogue addressable photoelectronic sensors are plug-in type smoke sensors that combine a photoelectronic sensing chamber with addressable-analogue communications. These sensors are designed for open area protection and must only be connected to control panels that use a compatible proprietary analogue addressable communciation protocol for monitoring and control.

The TC841E1019 Conventional Zone Interface module provides an interface between a zone of HONEYWELL® manufactured conventional type fire detection devices and an intelligent signalling loop. A single tri-colour LED indicates the status of the module. In normal conditions, the LED can be set by command from the control panel to blink green when the module is polled. In the case of a fire alarm on the conventional zone, the LED is switched on constant red by panel command. If a fault is detected on the conventional zone or the zone supply voltage drops below 18V, or a fault with the external power supply is signalled, the LED will blink yellow if enabled on the control panel. When a short circuit is detected on the loop to either side of the module, the LED is switched to show a constant yellow light.

The TC809EA1035 monitor module can be installed in a single gang junction box directly behind the monitored unit. Its small size and light weight allow it to be installed without rigid mounting (see Figure 1). The TC809EA1035 is intended for use in intelligent, two-wire systems where the individual address of each module is selected using rotary decade switches. It provides a two-wire initiating circuit for normally open contact fire alarm and security devices.

The relay module is a looppowered device controlling an unsupervised double pole (one normally open, one normally closed) output suitable for managing 240V ac loads. The output relay is a bi-stable device, latching in the on or off state on command from the control panel. It is available in two versions: boxed, wall mount and 35mm ‘Top Hat’ DIN rail mount.