Housing design allows mounting of devices in two layers. on the bottom, and the mounting plate. 1st layer: Housing in the standard version has installed in the bottom of the housing 3 DIN rails with a length of 480mm. Additionally, there is the possibility of additional 2 DIN rails mounting. Optionally, instead of DIN rails on the bottom of the housing can be installed mounting plate, with working area of 485 x 320 mm. The housing also has an additional mounting plate designed to mount transformers, or power supply units. 2nd layer: housing is equipped with a hinged mounting plate with working area of 410 x 170 mm. Such mounting plate provides easy access to equipment mounted on the bottom, at 1st layer. Inside the casing can be mounted up to 3 of such plates. Housing is lockable key switch. Front hinged door can simply be dismantled, but there is also the possibility of opening them to the left or right. Underside equipped with a 2 piece rail mounting spacers to allow comfortable wiring for the equipment installed in the housing. In housing there is a place for 65Ah/12V battery. Equipped with a tamper (to detect the opening of the housing). There is also the possibility of installing additional tamper on the side of the wall, signalling an attempt to detach casing from fixings, but only when 35mm spacer is not used. Thanks to universal surface-mounted design AWO630 housing can be used as part of the installation that integrates different types of CCTV, intruders alarms, access control systems, security systems, LAN, satellite. Dimensions: 455 x 650 x 200mm