The DC/DC 5Amp (DC/DC50SE-SEP) voltage-step up / step down converter is used for maintaining a constant output voltage in the range between 5÷15VDC, adjusted with the VADJ potentiometer, regardless of the input voltage fluctuations in the range of 9.5V ÷ 16VDC. When the input voltage at the output is lower than needed, the converter increases it to the set value. When the input voltage at the output is higher than needed, the converter lowers it to the needed value set by the VADJ potentiometer. The maximum load current is Imax=5Amp (Pmax = 60W). Input voltage: 9.5V÷16VDC. Output voltage: 12VDC / Galvanic isolation: input - output. Output current: 5Amp / 12VDC. Protections: Overload protection, Short-circuit protection. Technical outputs: PSU – converter failure. Dimensions: L=150 W=50 H=60 mm. Installation: a mounting panel with an adhesive tape, mounting screws.