An intermediate power supply designed for uninterrupted supply to devices that require a stabilized voltage of 12 VDC (+/- 15%). The power supply provides a voltage of U = 13.8 VDC with an output current of I = 5 Amp + 0.5 Amp for battery charging. In the event of a power failure, a backup battery is immediately activated. The unit is built on the basis of switched power supply, with high energy efficiency. The power supply is housed in a metal housing (RAL9003 color) that can accommodate a 17Ah / 12V battery. A microswitch indicates the opening of the door (front cover). Power supply: 176 ÷ 264VAC / 50Hz. Power supply output: 5A / 13.8VDC. Battery charging current: 0.5Amp. Mounting battery: Supports 7Ah / 12V and 17Ah / 12V. Efficiency: 87%. Protections: SCP, OVP, OLP, UVP, anti-sabotage (opening of the enclosure). Dimensions: 230 x 300 x 82 [+/- 2 mm]. Notes: Surface mounted box, locked - bolted (locking assembly possible).

An intermediate power supply designed for uninterrupted supply to devices that require a stabilized voltage of 12 VDC (+/- 15%). The power supply provides a voltage of U = 13.8 VDC with an output current of I = 2 Amp + 0.5 Amp for battery charging. In the event of a power failure, a backup battery is immediately activated. The unit is built on the basis of switched power supply, with high energy efficiency. The power supply is housed in a metal housing (RAL9003 color) that can accommodate a 7Ah / 12V battery. A microswitch indicates the opening of the door (front cover). Power supply: 176 ÷ 264VAC / 50Hz. Power supply output: 2A / 13.8VDC. Battery charging current: 0.5Amp. Mounting battery: Supports 7Ah / 12V. Efficiency: 87%. Protections: SCP, OVP, OLP, UVP, anti-sabotage (opening of the enclosure). Dimensions: 170 x 180 x 82 [+/- 2 mm]. Notes: Surface mounted box, locked - bolted (locking assembly possible).

The buffer power supply is designed for uninterrupted supply of devices requiring stabilized voltage of 12 V DC (+/-15%). The PSU supplies voltage of 13,8 V DC with current efficiency of I = 1 A + 0,3 A battery charging. In the case of mains power failure, the unit will instantly switch to battery power. The power supply unit is protected against shortcircuit, overload and overvoltage. During normal operation, the total current drawn by the device cannot exceed I=1 A. The maximum battery charging current is 0,3 A. The total current of the receivers + battery is max. 1,3 A. Power supply: 90÷264VAC/50Hz. Power supply output: 1A/13,8VDC. Battery charging current: 0,3Amp. Efficiency: 80%. Protections: SCP, OLP, UVP. IP67 over molded plastic enclosure. Plastic enclosure with mounting brackets. Dimensions: 135 x 50 x 33 mm.

Power supply: 200÷240VAC. Power supply output: 2A/27.6VDC. Compliant with standards: (1) Construction compliant with EN50131, GRADE 1 and 2. (2) Access control norm EN60839-11:2013, Grade 1 and 2. Battery charging current: 0.5A/1A. Efficiency: 89%. Dimensions: 159 x 98 x 42 [+/-2 mm]. Protections: SCP, OLP, OVP, UVP. Technical outputs relay type: (1) EPS – AC power failure, (2) APS – battery failure. Notes: (1) an automatic battery test performed every 5 minutes, (2) for mounting on a DIN rail, required bracket: DIN3, (3) Additional accessories: set of LED optical indication PKAZ168.

Power supply: 200÷240VAC. Power supply output: 3A/27.6VDC. Compliant with standards: (1) Construction compliant with EN50131, GRADE 1 and 2. (2) Access control norm EN60839-11:2013, Grade 1 and 2. Battery charging current: 0.5A/1A. Efficiency: 89%. Dimensions: 159 x 98 x 42 [+/-2 mm]. Protections: SCP, OLP, OVP, UVP. Technical outputs relay type: (1) EPS – AC power failure, (2) APS – battery failure. Notes: (1) an automatic battery test performed every 5 minutes, (2) for mounting on a DIN rail, required bracket: DIN3, (3) Additional accessories: set of LED optical indication PKAZ168.

Power supply: 200÷240VAC. Power supply output: 4A/27.6VDC. Compliant with standards: (1) Construction compliant with EN50131, GRADE 1 and 2. (2) Access control norm EN60839-11:2013, Grade 1 and 2. Battery charging current: 1A/2A. Efficiency: 89%. Dimensions: 204 x 141 x 52 [+/-2 mm]. Protections: SCP, OLP, OVP, UVP. Technical outputs relay type: (1) EPS – AC power failure, (2) APS – battery failure. Notes: (1) an automatic battery test performed every 5 minutes, (2) for mounting on a DIN rail, required bracket: DIN4, (3) Additional accessories: set of LED optical indication PKAZ168.

Power supply: 200÷240VAC. Power supply output: 2A/13.8VDC. Compliant with standards: (1) Construction compliant with EN50131, GRADE 1 and 2. (2) Access control norm EN60839-11:2013, Grade 1 and 2. Battery charging current: 0.5A/1A. Efficiency: 86%. Dimensions: 129 x 98 x 40 [+/-2 mm]. Protections: SCP, OLP, OVP, UVP. Technical outputs relay type: (1) EPS – AC power failure, (2) APS – battery failure. Notes: (1) an automatic battery test performed every 5 minutes, (2) for mounting on a DIN rail, required bracket: DIN2, (3) Additional accessories: set of LED optical indication PKAZ168.

Power supply: 200÷240VAC. Power supply output: 6A/13.8VDC. Compliant with standards: (1) Construction compliant with EN50131, GRADE 1 and 2. (2) Access control norm EN60839-11:2013, Grade 1 and 2. Battery charging current: 1A/2A. Efficiency: 87%. Dimensions: 159 x 98 x 42 [+/-2 mm]. Protections: SCP, OLP, OVP, UVP. Technical outputs relay type: (1) EPS – AC power failure, (2) APS – battery failure. Notes: (1) an automatic battery test performed every 5 minutes, (2) for mounting on a DIN rail, required bracket: DIN3, (3) Additional accessories: set of LED optical indication PKAZ168.

Power supply: 200÷240VAC. Power supply output: 4A/13.8VDC. Compliant with standards: (1) Construction compliant with EN50131, GRADE 1 and 2. (2) Access control norm EN60839-11:2013, Grade 1 and 2. Battery charging current: 1A/2A. Efficiency: 87%. Dimensions: 159 x 98 x 42 [+/-2 mm]. Protections: SCP, OLP, OVP, UVP. Technical outputs relay type: (1) EPS – AC power failure, (2) APS – battery failure. Notes: (1) an automatic battery test performed every 5 minutes, (2) for mounting on a DIN rail, required bracket: DIN3, (3) Additional accessories: set of LED optical indication PKAZ168.

Switch mode buffer power supply unit for cameras and recorders. Size: 199 x 97 x 65 mm. Uin=176÷264VAC, Uout=27.6VDC. ?I=5.5A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection), EPS (AC Failure), PSU (Power Supply Failure), LoB (Low Battery Voltage).

Power supply: 200÷240VAC. Power supply output: 9A/13.8VDC. Compliant with standards: (1) Construction compliant with EN50131, GRADE 1 and 2. (2) Access control norm EN60839-11:2013, Grade 1 and 2. Battery charging current: 1A/4A. Efficiency: 88%. Dimensions: 204 x 141 x 52 [+/-2 mm]. Protections: SCP, OLP, OVP, UVP. Technical outputs relay type: (1) EPS – AC power failure, (2) APS – battery failure. Notes: (1) an automatic battery test performed every 5 minutes, (2) for mounting on a DIN rail, required bracket: DIN4, (3) Additional accessories: set of LED optical indication PKAZ168.

Switch mode buffer power supply unit for cameras and recorders. Size: 159 x 97 x 42 mm. Uin=176÷264VAC, Uout=27.6VDC. ?I=1.8A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection).

Switch mode buffer power supply units PSB are intended for continuous power supply to devices that require stabilised voltage of 12, 24 or 48 V DC (±15%) . Size: 199 x 110 x 50 mm. Uin=~200 – 240 V, Uout=54VDC. ?I=3A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection).

Switch mode buffer power supply unit for cameras and recorders. Size: 275 x 115 x 73 mm. Uin=176÷264VAC, Uout=13.8VDC. ?I=20A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection), EPS (AC Failure), PSU (Power Supply Failure), LoB (Low Battery Voltage).

Switched source with forced ventilation - built-in fan, prepared for connection with battery (with safety backup) in grid box with wired connectors. Size: 275 x 50 x 115 [+/- 2 mm]. Input = 176 ÷ 264VAC, Output=54VDC@4.5Amp with 0.5 / 1 / 2Amp for battery. Protections: SCP, OLP, OVP, UVP, OHP. Optical LED signaling. For DIN rail mounting, a PSDIN2 bracket is required. Efficiency: 85%.

Switch mode buffer power supply unit for cameras and recorders. Size: 110 x 78 x 36 mm. Uin=176÷264VAC, Uout=13,8VDC. ?I=1.5A, SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection).

Switch mode buffer power supply unit for cameras and recorders. Size: 199 x 97 x 65 mm. Uin=176÷264VAC, Uout=13.8VDC. ?I=11A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection), EPS (AC Failure), PSU (Power Supply Failure), LoB (Low Battery Voltage).

Switched power supply prepared for battery connection (with safety backup) in grid box with wired connectors. Size: 199 x 50 x 110 [+/- 2mm]. Input = 176 ÷ 264VAC, Output=54VDC@2.3Amp with 0.5 / 1Amp for battery. SCP (Short Circuit Protection), OLP (Overcharge Protection), OVP (Over Voltage Protection), UVP (Battery Deep Discharge Protection). Efficiency: 86%. Optical LED signaling. For DIN rail mounting, a PSDIN2 bracket is required.

Switch mode buffer power supply unit for cameras and recorders. Size: 199 x 110 x 50 mm. Uin=176÷264VAC, Uout=13,8VDC. ?I=11A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection).

backup) in grid box with wired connectors. Size: 129 x 40 x 98 [+/- 2mm]. Input = 176-264VAC, Output = 13.8VDC / 5Amp + 0.5Amp for battery. SCP (Short Circuit Protection), OLP (Overcharge Protection), OVP (Over Voltage Protection), UVP (Battery Deep Discharge Protection). Optical LED signaling.

Switched power supply prepared for battery connection (with safety backup) in grid box with wired connectors. Size: 110 x 36 x 78 [+/- 2 mm]. Input = 176-264VAC, Output = 13.8VDC / 3Amp + 0.5Amp for battery. SCP (Short Circuit Protection), OLP (Overcharge Protection), OVP (Over Voltage Protection), UVP (Battery Deep Discharge Protection). Optical LED signaling.

Switched power supply prepared for battery connection (with safety backup) in grid box with wired connectors. Size: 110 x 36 x 78 [+/- 2 mm]. Input = 176-264VAC, Output = 13.8VDC / 2Amp + 0.5Amp for battery. SCP (Short Circuit Protection), OLP (Overcharge Protection), OVP (Over Voltage Protection), UVP (Battery Deep Discharge Protection). Optical LED signaling.

Switch mode buffer power supply units PSB are intended for continuous power supply to devices that require stabilised voltage of 12, 24 or 48 V DC (±15%) . Size: 199 x 110 x 50 mm. Uin=~200 – 240 V, Uout=13,8VDC. ?I=10A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection).

An intermediate power supply designed for uninterrupted supply to devices that require a stabilized voltage of 12 VDC (+/- 15%). The power supply provides a voltage of U = 27.6 VDC with an output current of I = 4.5 Amp + 0.5/2 Amp for battery charging. In the event of a power failure, a backup battery is immediately activated. The unit is built on the basis of switched power supply, with high energy efficiency. The power supply is housed in a metal housing (RAL9003 color) that can accommodate 2 x 7Ah / 2 x 17Ah / 2 x 28Ah / 2 x 40Ah batteries. A microswitch indicates the opening of the door (front cover). Power supply: 176 ÷ 264VAC / 50Hz. Power supply output: 4.5A / 27.6VDC. Battery charging current: 0.5Amp. Mounting battery: Supports 2 x 7Ah / 2 x 17Ah / 2 x 28Ah / 2 x 40Ah. Efficiency: 87%. Protections: SCP, OVP, OLP, UVP, anti-sabotage (opening of the enclosure). Dimensions: 460 x 390 x 173 [+/- 2 mm]. Notes: Surface mounted box, locked - bolted (locking assembly possible).