English
Español
  • Search
    • +34 902930427

    0.00 €

    Energy Distribution

    Products 53
    PULSAR® DC/DC 1.5Amp (12VDC) Power Converter/Reducer (Jack Output) [DCDC15H]
    PULSAR® DC/DC 1.5Amp (12VDC) Power Converter/Reducer (Jack Output)
    Ref.: DCDC15H
    The DC/DC converter is used for powering devices that require stabilized voltage of 12 VDC. The maximum current load is 1.5Amp (Pmax= 18W). 12V/1.5A/62MM DC/DC converter. Power supply: 18÷40VDC. Power supply output: 1.5A/12VDC. Efficiency: 86%. Protections: against short circuit protection. Overload protection. Against reverse input voltage polarity. IP67 plastic enclosure. for flush or surface mounted junction boxes: Ø80. Dimensions: 58 x 58 x 28 mm.
    V.A.T. included
    Consult
    PULSAR® DC/DC 2.5Amp (48VDC) Power Converter/Increaser [DC/DC48250]
    PULSAR® DC/DC 2.5Amp (48VDC) Power Converter/Increaser
    Ref.: DC/DC48250
    The DC/DC 48V/2.5Amp (DC/DC48250) step up converter increasing the input voltage from the range between 9.5V÷28VDC to the voltage range of 48VDC at the output. The maximum load current is Imax=2.5Amp (Pmax = 60W). Input voltage: 9.5V÷28VDC. Output voltage: 48VDC. Output current: 2.5Amp. Protections: Overload protection, Short-circuit protection. Technical outputs: PSU – converter failure. Dimensions: L=140 W=43 H=45 mm. Installation: a mounting panel with an adhesive tape, mounting screws.
    V.A.T. included
    Consult
    PULSAR® DC/DC 0.5Amp (12VDC) Power Converter/Reducer (Jack Input/Output) [DC/DC05-J]
    PULSAR® DC/DC 0.5Amp (12VDC) Power Converter/Reducer (Jack Input/Output)
    Ref.: DC/DC05-J
    The converter is designed to supply devices requiring stabilized voltage of 12VDC. The maximum load current is 0.5Amp (Pmax= 6W). Power supply: 12÷30VDC. Power supply output: 0.5Amp/12VDC. Efficiency: 86%. Protections: against reverse input voltage polarity. Dimensions: 50 x 20 x 18 mm. Length of DC input cable: 0.13m + JACK socket 5.5mm/2.1mm male. Length of DC output cable: 0.13m + plug JACK 5.5mm/2.1mm female.
    V.A.T. included
    9.15 €
    PULSAR® DC/DC 0.5Amp (12VDC) Power Converter/Reducer (Jack Output) [DC/DC05]
    PULSAR® DC/DC 0.5Amp (12VDC) Power Converter/Reducer (Jack Output)
    Ref.: DC/DC05
    The converter is designed to supply devices requiring stabilized voltage of 12V DC. The maximum load current is 0.5Amp (Pmax= 6W). Power supply: 12÷30VDC. Power supply output: 0.5Amp/12VDC. Efficiency: 86%. Protections: against reverse input voltage polarity. Dimensions: 50 x 20 x 18 mm. Length of DC input cable: 0.13m + screw connection ?0,51÷1,15 (AWG 24-17), 0,2÷1mm2. Length of DC output cable: 0.13m + plug JACK 5.5mm/2.1mm female.
    V.A.T. included
    9.15 €
    Distribution Box with 2 Fuses [AWOZ-225S]
    Distribution Box with 2 Fuses
    Ref.: AWOZ-225S
    Distribution Junction Boxes with 2 x 0.375Amp fuses. AWOZ series. Dimensions: 120 x 120 x 37 mm, colour: red RAL3001.
    V.A.T. included
    57.93 €
    Distribution Box with 1 Fuse [AWOZ-125S1A]
    Distribution Box with 1 Fuse
    Ref.: AWOZ-125S1A
    Distribution Junction Box with 1 x 1.0Amp fuse. AWOZ series. Dimensions: 120 x 120 x 37 mm, colour: red RAL3001.
    V.A.T. included
    42.43 €
    Distribution Box with 1 Fuse [AWOZ-125S]
    Distribution Box with 1 Fuse
    Ref.: AWOZ-125S
    Distribution Junction Box with 1 x 0.375Amp fuse. AWOZ series. Dimensions: 120 x 120 x 37 mm, colour: red RAL3001.
    V.A.T. included
    42.43 €
    Distribution Box with 1 Fuse [AWOZ-125P1A]
    Distribution Box with 1 Fuse
    Ref.: AWOZ-125P1A
    Distribution Junction Box with 1 x 1.0Amp fuse. AWOZ series. Dimensions: 154 x 80 x 30 mm, colour: red RAL3001.
    V.A.T. included
    35.57 €
    Distribution Box with 1 Fuse [AWOZ-125P]
    Distribution Box with 1 Fuse
    Ref.: AWOZ-125P
    Distribution Junction Box with 1 x 0.375Amp fuse. AWOZ series. Dimensions: 154 x 80 x 30 mm, colour: red RAL3001.
    V.A.T. included
    35.57 €
    Distribution Box with 2 Fuses [AWOZ-225P]
    Distribution Box with 2 Fuses
    Ref.: AWOZ-225P
    Distribution Junction Boxes with 2 x 0.375Amp fuses. AWOZ series. Dimensions: 122 x 142 x 30 mm, colour: red RAL3001.
    V.A.T. included
    57.93 €
    Distribution Box for Wiring 4 x 2.5 mm² [AWOP-425SR]
    Distribution Box for Wiring 4 x 2.5 mm²
    Ref.: AWOP-425SR
    Distribution Junction Box. AWOP series. For 4 x 2.5 mm² wires. Dimensions: 120 x 120 x 37 mm, colour: red RAL3001.
    V.A.T. included
    55.39 €
    Distribution Box for Wiring 3 x 6 mm² [AWOP-360PR]
    Distribution Box for Wiring 3 x 6 mm²
    Ref.: AWOP-360PR
    Distribution Junction Box. AWOP series. For 3 x 6 mm² wires. Dimensions: 204 x 100 x 30 mm, colour: red RAL3001.
    V.A.T. included
    46.25 €
    Distribution Box for Wiring 3 x 2.5 mm² [AWOP-325PR]
    Distribution Box for Wiring 3 x 2.5 mm²
    Ref.: AWOP-325PR
    Distribution Junction Box. AWOP series. For 3 x 2.5 mm² wires. Dimensions: 204 x 100 x 30 mm, colour: red RAL3001.
    V.A.T. included
    42.43 €
    Distribution Box for Wiring 2 x 2.5 mm² [AWOP-225PR]
    Distribution Box for Wiring 2 x 2.5 mm²
    Ref.: AWOP-225PR
    Distribution Junction Box. AWOP series. For 2 x 2.5 mm² wires. Dimensions: 54 x 80 x 30 mm, colour: red RAL3001.
    V.A.T. included
    35.57 €
    Connection Box for Wiring 9 x 6 mm² [AWOP-960PP]
    Connection Box for Wiring 9 x 6 mm²
    Ref.: AWOP-960PP
    Junction Box 9 x 6 mm². AWOP series. Dimensions: 204 x 100 x 30 mm, colour: red RAL3001.
    V.A.T. included
    43.45 €
    Connection Box for Wiring 6 x 2.5 mm² [AWOP-625PP]
    Connection Box for Wiring 6 x 2.5 mm²
    Ref.: AWOP-625PP
    Junction Box 6 x 2.5 mm². AWOP series. Dimensions: 54 x 80 x 30 mm, colour: red RAL3001.
    V.A.T. included
    35.57 €
    Distribution Box for Wiring 2 x 2.5 mm² [AWOP-225SR]
    Distribution Box for Wiring 2 x 2.5 mm²
    Ref.: AWOP-225SR
    Distribution Junction Box. AWOP series. For 2 x 2.5 mm² wires. Dimensions: 120 x 120 x 37 mm, colour: red RAL3001.
    V.A.T. included
    42.43 €
    Connection Box for Wiring 9 x 2.5 mm² [AWOP-925PP]
    Connection Box for Wiring 9 x 2.5 mm²
    Ref.: AWOP-925PP
    Junction Box 9 x 2.5 mm². AWOP series. Dimensions: 90 x 80 x 30 mm, colour: red RAL3001.
    V.A.T. included
    39.64 €
    PULSAR® DC/DC 52V/2.3A Power Converter for Voltage Increase [DC/DC52230]
    PULSAR® DC/DC 52V/2.3A Power Converter for Voltage Increase
    Ref.: DC/DC52230
    "The DC/DC 52V/2.3A booster module (DC/DC52230) is used to maintain a constant output voltage of 18÷28VDC at the 52 V DC voltage at the converter output. The maximum load current is Imax = 2.3 A (Pmax = 120 W). The module does not have galvanic isolation between the input / output (IN-AUX), it operates on the common ""ground"" potential (0V) (the IN- and AUX- terminals are galvanically connected = common terminal)."
    V.A.T. included
    92.75 €
    PULSAR® MSC 12V/1,5Amp-24V/1Amp/M Power Supply Module for CCTV [MSC1512]
    PULSAR® MSC 12V/1,5Amp-24V/1Amp/M Power Supply Module for CCTV
    Ref.: MSC1512
    The MSC1512 PSU module is intended for supplying devices that require voltage of 12V or 24V DC. The module is designed as a supplying component in CCTV systems, KD access control, SSWiN alarm systems, etc. It is intended to be wall-mounted or fixed inside a device (e.g. camera’s enclosure). When supplied with the maximum AC power, the module enables supplying 12V DC cameras for a longer distance (approx. 2x) than in case of 13,8V DC supply (with the same cross-section and resistance of the wires). The module does not hale galvanic insolation between input/output (AC-AUX). For correct operation of the module, the appropriate input voltage and current efficiency of the power source shall be provided.
    V.A.T. included
    Consult
    PULSAR® DC/DC 5Amp (12VDC) Voltage Reducer [RN500]
    PULSAR® DC/DC 5Amp (12VDC) Voltage Reducer
    Ref.: RN500
    The RN 12V/5Amp (RN500) is intended for lowering and stabilising DC voltage within the range of 9÷14V into the value of 12V. In the case when the output voltage drops below the preset output value, the transistor opens and the reducer conducts without any loss. That enables full use of energy accumulated in the PSU's battery during batter-assisted operation. Voltage: 9V÷14VDC. Output current: 5Amp/24VDC. Protections: Overload protection, Short-circuit protection. Dimensions: L=63, W=67, H=42 [+/- 2mm].
    V.A.T. included
    68.86 €
    PULSAR® DC/DC 2.5Amp (24VDC) Voltage Reducer [RN25024]
    PULSAR® DC/DC 2.5Amp (24VDC) Voltage Reducer
    Ref.: RN25024
    The RN 24V/2.5Amp (RN25024) is intended for lowering and stabilising DC voltage within the range of 24÷28V into the value of 24V (adjustment 22V÷Uin DC). In the case when the output voltage drops below the preset output value, the transistor opens and the reducer conducts without any loss (voltage drop ?U<1%). That enables full use of energy accumulated in the PSU's battery during batter-assisted operation. Voltage: 18V÷28VDC. Output current: 2.5Amp/24VDC. Protections: Overload protection, Short-circuit protection. Dimensions: L=63, W=67, H=42 [+/- 2mm].
    V.A.T. included
    Consult
    PULSAR® DC/DC 2.5Amp (12VDC) Voltage Reducer [RN250]
    PULSAR® DC/DC 2.5Amp (12VDC) Voltage Reducer
    Ref.: RN250
    The RN 12V/2.5Amp (RN250) is intended for lowering and stabilising DC voltage within the range of 9÷14V into the value of 12V. In the case when the output voltage drops below the preset output value, the transistor opens and the reducer conducts without any loss. That enables full use of energy accumulated in the PSU's battery during batter-assisted operation. Voltage: 9V÷14VDC. Output current: 2.5Amp/12VDC. Protections: Overload protection, Short-circuit protection. Dimensions: L=63, W=50, H=45 [+/- 2mm].
    V.A.T. included
    Consult
    PULSAR® DC/DC 52V/1.15A Power Converter for Voltage Increase [DC/DC52115]
    PULSAR® DC/DC 52V/1.15A Power Converter for Voltage Increase
    Ref.: DC/DC52115
    "The DC/DC 52V/1.15A booster module (DC / DC52115) is used to maintain a constant output voltage of 9.5-28 V DC at the 52 V DC voltage at the converter output. The maximum load current is Imax = 1.15 A (Pmax = 60 W). The module does not have galvanic isolation between the input / output (IN-AUX), it operates on the common ""ground"" potential (0V) (the IN- and AUX- terminals are galvanically connected = common terminal)."
    V.A.T. included
    83.85 €
    SYSAWAY© 2024 All rights reserved