2.5Amp power supply for LightSYS2™ main panels.

12 VDC / 1,5A Power supply in a metal box. Appropriate use in systems design to fulfill with EN50131-6:2008 Grade 3 and Class II environment that requires a power supply capacity of 17Ah. Includes a battery charger. Fault indication for AC lost, FA fault and low battery warning. Requires 1 battery (MVH12180M5) not included. Dimensions: 275 x 330 x 80 mm. Security grade 3 certified.

12 VDC / 1,5A Power supply in a metal box. Appropriate use in systems design to fulfill with EN50131-6:2008 Grade 3 and Class II environment that requires a power supply capacity of 17Ah. Includes a battery charger. Fault indication for AC lost, FA fault and low battery warning. Requires 1 battery (MVH12180M5) not included. Dimensions: 275 x 330 x 80 mm. Security grade 2 certified.

12 VDC / 1A Power supply in a metal box. Appropriate use in systems design to fulfill with EN50131-6:2008 Grade 3 and Class II environment that requires a power supply capacity of 7Ah. Includes a battery charger. Fault indication for AC lost, FA fault and low battery warning. Requires 1 battery (MVH1272F2) not included. Dimensions: 200 x 230 x 80 mm. Security grade 2 certified.

Switching power supply unity with 100-240 VAC 50/60Hz (2 Amp. fuse) input range and 12 VDC @ 4A output, in metal enclosure. Includes a battery charger. Requires 1 battery (MVH1272F2) not included. Opertating temperature from -20ºC to 80ºC. Dimensions: 355 x 330 x 80 mm.

Switching power supply unity with 100-240 VAC 50/60Hz (2 Amp. fuse) input range and 12 VDC @ 2A output, in metal enclosure. Includes a battery charger. Requires 1 battery (MV1223) not included. Opertating temperature from -20ºC to 80ºC. Dimensions: 200 x 230 x 80 mm.

Switching power supply unity with 100-240 VAC 50/60Hz (2 Amp. fuse) input range and 12 VDC @ 1A output, in metal enclosure. Includes a battery charger. Requires 1 battery (MV1223) not included. Opertating temperature from -20ºC to 80ºC. Dimensions: 200 x 230 x 80 mm.

Switch mode buffer power supply unit (with a transformer) PSBEN/LED series. Dimensions: 405 x 375 x 178 mm. Uin=230VAC/50Hz, Uout=3,5A/13,8VDC - for grade 1,2; 2,16A/13,8VDC - for grade 3; 5A/13,8VDC - for general application, tamper: 2xNC, 65Ah. Anti-sabotage protection, space for battery 12V SLA, UVP (battery protection). Technical outputs: EPS (AC failure), PSU (power supply failure) and APS (battery failure). EN50131 Grade 1, 2 and 3 compliant.

12 VDC / 1A Power supply in a metal box. Appropriate use in systems design to fulfill with EN50131-6:2008 Grade 3 and Class II environment that requires a power supply capacity of 7Ah. Includes a battery charger. Fault indication for AC lost, FA fault and low battery warning. Requires 1 battery (MVH1272F2) not included. Dimensions: 200 x 230 x 80 mm. Security grade 3 certified.

4.5 Amp power supply for LightSYS™ control panels, Grade 3 (mains connection plug not included).

2.5 Amp power supply for LightSYS™ control panels, Grade 3 (mains connection plug not included).

Power supply unit for ProSYS™ Plus 14.4V / 4.5Amp alarm panels.

The buffer power supply is designed in accordance with the requirements of the EN 50131-6 standard, grade 1÷2 and II environmental class. It is intended for an uninterrupted supply of alarm system devices requiring stabilized voltage of 12 V DC (+/-15%). Alinear stabilizing system, which has been used in the unit, provides voltage with a lower level of noise and a quicker response to interference when compared to a switched-mode regulator. Power supply: 230VAC/50Hz. Power supply output: (1) 3A/13,8VDC - for general application (2) 1,4A/13,8VDC - for grade 1, 2. Battery charging current: 0,4A/0,9A. Fitting battery: 17Ah/12V. Current consumption by PSU systems: 15 mA max. Protections: SCP, OLP, OVP, UVP, tamper (opening of the enclosure). Technical outputs OC type: EPS - 230V power failure AC, PSU - power supply failure, APS – battery failure. Compliance with the standards: EN50131-6. Dimensions: W=230 H=300 D+D1=82+8 mm [+/- 2mm]. Surface mounted enclosure, locking – bolted.

The buffer power supply is designed in accordance with the requirements of the EN 50131-6 standard, grade 1÷2 and II environmental class. It is intended for an uninterrupted supply of alarm system devices requiring stabilized voltage of 12 V DC (+/-15%). Alinear stabilizing system, which has been used in the unit, provides voltage with a lower level of noise and a quicker response to interference when compared to a switched-mode regulator Power supply: 230VAC/50Hz. Power supply output: (1) 2A/13,8VDC – for general application (2) 1,1A/13,8VDC – for grade 1, 2. Battery charging current: 0,4A/0,9A. Fitting battery: 17Ah/12V. Current consumption by PSU systems: 15 mA max. Protections: SCP, OLP, OVP, UVP, tamper (opening of the enclosure). Technical outputs OC type: EPS – 230V power failure AC, PSU – power supply failure, APS – battery failure. Compliance with the standards: EN50131-6. Dimensions: W=230 H=300 D+D1=82+8 mm [+/- 2mm]. Surface mounted enclosure, locking – bolted.

The buffer power supply is designed in accordance with the requirements of the EN 50131-6 standard, grade 1÷2 and II environmental class. It is intended for an uninterrupted supply of alarm system devices requiring stabilized voltage of 24V DC (+/-15%). A linear stabilizing system, which has been used in the unit, provides voltage with a lower level of noise and a quicker response to interference when compared to a switched-mode regulator. Power supply: 230VAC/50Hz. Power supply output: (1) 2A/27,6VDC - for general application (2) 0,58A/27,6VDC - for grade 1, 2. Battery charging current: 0,4A. Fitting battery: 2x7Ah/12V. Current consumption by PSU systems: 15 mA max. Protections: SCP, OLP, OVP, UVP, tamper (opening of the enclosure). Technical outputs OC type: EPS - 230V power failure AC, PSU - power supply failure, APS – battery failure. Compliance with the standards: EN50131-6. Dimensions: W=230 H=300 D+D1=92+8 mm [+/- 2mm]. Surface mounted enclosure, locking – bolted.

To complement the range of low profile 12V CCTV power supplies, ELMDEME has just introduced an even smaller version! This 4A unit comes with 4 individually fused output circuits. It has all the features of the larger versions but measures just 185 x 200 x 60mm. Voltage range: 12 V, 4 A. IP65.

The GEN Switch Mode range of power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing Intruder Alarm Systems to grade 2 and 3 under PD6662:2010 / EN50131-6:2008, with built in quality and reliability. Both grades of product are available in two power variants with a range of enclosure sizes providing the required space for the standby battery. Two LED’s assist with quick and easy installation by showing presence of mains, correct battery charging or a fault condition, whilst fault outputs are available to relay this information back to the intruder panel. Each PSU incorporates intelligent battery management comprising of full load battery testing, low battery voltage detection and deep discharge protection. PSU protection is builit-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs. Voltage range: 12 V, 1,5+0,8 A. GRADE 2.

The GEN Switch Mode range of power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing Intruder Alarm Systems to grade 2 and 3 under PD6662:2010 / EN50131-6:2008, with built in quality and reliability. Both grades of product are available in two power variants with a range of enclosure sizes providing the required space for the standby battery. Two LED’s assist with quick and easy installation by showing presence of mains, correct battery charging or a fault condition, whilst fault outputs are available to relay this information back to the intruder panel. Each PSU incorporates intelligent battery management comprising of full load battery testing, low battery voltage detection and deep discharge protection. PSU protection is builit-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs. Voltage range: 12 V, 1+0,6 A. GRADE 2.

The GEN Switch Mode range of power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing Intruder Alarm Systems to grade 2 and 3 under PD6662:2010 / EN50131-6:2008, with built in quality and reliability. Both grades of product are available in two power variants with a range of enclosure sizes providing the required space for the standby battery. Two LED’s assist with quick and easy installation by showing presence of mains, correct battery charging or a fault condition, whilst fault outputs are available to relay this information back to the intruder panel. Each PSU incorporates intelligent battery management comprising of full load battery testing, low battery voltage detection and deep discharge protection. PSU protection is builit-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs. Voltage range: 12 V, 1,5+0,8 A. GRADE 3.

The GEN Switch Mode range of power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing Intruder Alarm Systems to grade 2 and 3 under PD6662:2010 / EN50131-6:2008, with built in quality and reliability. Both grades of product are available in two power variants with a range of enclosure sizes providing the required space for the standby battery. Two LED’s assist with quick and easy installation by showing presence of mains, correct battery charging or a fault condition, whilst fault outputs are available to relay this information back to the intruder panel. Each PSU incorporates intelligent battery management comprising of full load battery testing, low battery voltage detection and deep discharge protection. PSU protection is builit-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs. Voltage range: 12 V, 1+0,6 A. GRADE 3.

The GEN Switch Mode range of power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing Intruder Alarm Systems to grade 2 and 3 under PD6662:2010 / EN50131-6:2008, with built in quality and reliability. Both grades of product are available in two power variants with a range of enclosure sizes providing the required space for the standby battery. Two LED’s assist with quick and easy installation by showing presence of mains, correct battery charging or a fault condition, whilst fault outputs are available to relay this information back to the intruder panel. Each PSU incorporates intelligent battery management comprising of full load battery testing, low battery voltage detection and deep discharge protection. PSU protection is builit-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs. Voltage range: 12 V, 1,5+0,8 A. GRADE 2.

High efficiency, cost effective range of Switch Mode power supplies for use in Access Control, CCTV and General Purpose applications. Modular construction provides for easy maintenance and upgrade capability. Boxed and Unboxed Models. Voltage range: 12 V, 5+1 A.

Switching power supply 12 V, 5 + 0.5 Amp. High efficiency power supply for use in access control applications, CCTV, intrusion and general purpose applications. Its modular construction allows easy maintenance and updating capacity. Model in box.

High efficiency, cost effective range of Switch Mode power supplies for use in Access Control, CCTV and General Purpose applications. Modular construction provides for easy maintenance and upgrade capability. Boxed and Unboxed Models. Voltage range: 12 V, 4+1 A.