This decoder has been designed to work only with MDS-Digital and AC Plus systems. It has 8 sensor inputs that can be configured to be used as sensor input N.O. (with normally open contact) or N.C. (normally closed contact), this is achieved by means of a bridge located next to each entrance. In both cases, the activation of the signal can be sent from the central unit in real time (instantaneous) or with delay, depending on the choice of the "time" parameter that controls the time that the sensor must be activated to generate a signal of alarm. DIN-10 rail format to facilitate installation inside an electrical equipment box, or they can be screwed directly onto the wall.

Two Reader Expansion Board [Does not support OSDP readers or wet outputs]. The BRIVO® ACS6000 series hardware is our next generation of native IP control panels designed to support components of the BRIVO® OnAir™ and BRIVO® Onsite Server access control platforms. IP based access control and alarms. Supports up to 30 card readers per control panel. Supports BRIVO® OnAir™ Pass credentials (ACS6100-E only). Host communication via ethernet and/or Wi-Fi. Encrypted storage and communications. Host authentication via digital certificates. Modular growth via expansion boards. Supports Wiegand and OSDP compatible readers. Supports select wireless door locks.

Brivo Cellular Network Module with Zone 3 (Europe) 4G SIM for connecting one ACS300-E or ACS6000-E. For use with Brivo E Series control panels only. Cellular plan billed separately.

BRIVO® Onair™ ACS6008 Two (2) Reader Ethernet Control Panel (includes chassis enclosure, enclosure lock and WiFi Antenna; will accommodate three (3) expansion boards); 1 - Internal Power Supply (Does not support power for electronic locks); 1 - Plug-in Transformer with Adapter for Type A, C and G Socket; 2 - 12v 7.0 Ah Sealed Lead Acid Battery (not included).

BRIVO® Onair™ ACS6000 Two (2) Reader Ethernet Control Panel (includes chassis enclosure, enclosure lock and WiFi antenna; will accommodate one (1) expansion board); 1 - Internal Power Supply (Does not support power for electronic locks); 1 - Plug-in Transformer with Adapters for Type A, C and G Sockets; and 1 - 12v 7.0 Ah Sealed Lead Acid Battery (not included).

2 Reader Main Board - BRIVO® OnAir™ (Board Only). The BRIVO® ACS6000 series hardware is our next generation of native IP control panels designed to support components of the BRIVO® OnAir™ and BRIVO® Onsite Server access control platforms. IP based access control and alarms. Supports up to 30 card readers per control panel. Supports BRIVO® OnAir™ Pass credentials (ACS6000-E only). Host communication via ethernet and/or Wi-Fi. Encrypted storage and communications. Host authentication via digital certificates. Modular growth via expansion boards. Supports Wiegand and OSDP compatible readers. Supports select wireless door locks.

Provides 8 additional input points and 8 additional output relays to the BRIVO® ACS6100 series control panels. Each input point can be programmed for input line supervision and for normally open or normally closed inputs. Outputs are form C (SPDT) relays. ACS6100-I/O expansion boards must be connected to an ACS6100-E, ACS6100-W/G, or ACS6100-S control panel to operate properly. BRIVO® ACS6100 series control panels support any combination of ACS6100-I/O and ACS6100-DB expansion boards up to a maximum of 14 expansion boards per ACS6000 series control panel and are connected via high speed CAN bus. To maintain UL294 compliance, the ACS6100-IO must be installed and powered by an ACS6100 series chassis.

Two Reader Expansion Board [Does not support OSDP readers or wet outputs]. The BRIVO® ACS6000 series hardware is our next generation of native IP control panels designed to support components of the BRIVO® OnAir™ and BRIVO® Onsite Server access control platforms. IP based access control and alarms. Supports up to 30 card readers per control panel. Supports BRIVO® OnAir™ Pass credentials (ACS6000-E only). Host communication via ethernet and/or Wi-Fi. Encrypted storage and communications. Host authentication via digital certificates. Modular growth via expansion boards. Supports Wiegand and OSDP compatible readers. Supports select wireless door locks.

BRIVO® OnAir™ self-contained hardware demonstration unit (Does not include Brivo Onair demonstration account). Includes: 1 - ACS300-E, 1 - Brivo Multi-tech card reader, 1 - Display stand.

IP based access control and alarms. Supports up to 2 card readers per controller. Supports BRIVO® OnAir™ Pass via Bluetooth local connection. Host Communication via Ethernet and/or Wi-Fi. Encrypted storage and communications. Power over Ethernet (PoE+). Host authentication via digital certificates. Supports Wiegand and OSDP compatible readers. Supports select wireless door locks. 60,000 events (FIFO) offline from host. 8 inputs per controller. 6 outputs per controller. Up to 250,000 credentials per controller while offline. 2 x Wiegand Ports, or 1 x RS-485 Port for connecting 2 x OSDP Readers. Requires PoE, PoE+ or 12vdc Linear Power Supply. Reader, Battery & Power Supply, Not Included.

Output element connection module (up to 12 dry contact relays) for connection to RS485 bus managed by an AERO™ X1100 controller. Plastic casing on the front and back. The X300 is a replacement for the VertX™ V300 as it conforms to its shape.

Input device connection module (up to 16 devices) for connection to the RS485 bus managed by an AERO™ X1100 controller. Plastic casing on the front and back. The X200 is a replacement for the VertX™ V200 as it conforms to its shape.

Reader connection module (up to 2 wiegand readers or 4 OSDP readers, and two doors) for connection to the RS485 bus managed by an AERO™ X11000 controller. Plastic casing on the front and back. The X100 is a replacement for the VertX™ V100 as it conforms to its shape.

Controller for host systems with TCP/IP connection for managing the RS485 bus and readers connection capability (up to 2 wiegand readers or 4 OSDP readers, and two doors). It controls the management of the AERO™ modules connected to the bus. Allows the connection of up to 32 modules (64 readers). Plastic casing on the front and back. VertX™ Compatibility - Installs in the same space as the VertX™ and communicates with the V100, V200, and V300 I/O modules.

The LP4502 is an intelligent controller platform with built-in or 'native' network support. Powerful and recognized for flexible high-performance, the LP4502 is Ethernet ready and capable of efficiently managing a large network of access panels in any system design. Once configured, the LP4502 functions independently and is capable of controlling access, managing alarms, interfacing with an array of hardware devices, all while providing the decision-making oversight that each system configuration requires. The LP4502 is capable of elaborate processes and procedures without host intervention. Features: Multi-operating system interface. Multi- host interface communications. Fault- tolerant communications capability. Multi- card format support. Multi- reader technology support. AES 128 bit data encryption. HSPD-12/FIPS201 Compliant. UL 294 Recognized. Alarm keypad support. Function key support. Universal I/O device characterization. Supports bus controllers up to 64 doors. Supports natively up to 4 Readers in 2 Doors + 8I / 4O.

The MUX8 is an eight-port multi-device interface panel for OEMs and provides flexible RS- 485 wiring management of diverse system installations. It is ideal for supporting wiring schemes such as star, home run or distances exceeding 4,000 feet (1,200 m). Benefits: (1) Flexibility to expand a single data line into multiple lines. (2) Connect to Mercury hardware to address difficult installations.

The MR-62E is a network-ready and PoE (Power-over-Ethernet)-enabled I/O module that will interface card readers or a set of paired card readers and associated door hardware (for two doors) and one general-purpose control relay. Its compact 2.75" x 5.5" (75 mm x 140 mm) size makes it ideal for applications requiring installation at or near the door it is controlling. The MR-62E can be powered locally (from a 10-14 VDC power supply) or via a PoE-enabled Ethernet switch. The unit passes access request and status change information to the SCP for processing. When not connected to an SCP, it is capable of locally processing access requests based on facility code verification. Up to eight facility codes may be active in each MR-62E. Native support for OSDP readers, does not support Wiegand readers.

MR16out is a sixteen output sub-controller that is configurable to control a variety of outboard devices for general facility control such as lighting, heating/cooling, door and elevator control. The panel is dedicated to point control and monitoring, providing 16 general-purpose outputs as Form C relay contacts. The MR16out has the same reliable interface and identical footprint as Series 2, MR16out, enabling seamless upgrades for existing deployments. Easily connect to Series 2 Controllers: SCP-2, SCP-M and EPC-1. Easy Expansion: Adds functionality and flexibility to existing access control systems. Features: 16 programmable relay outputs; 2 dedicated inputs. AES 128/256 Data Encryption. UL 294 recognized, CE compliant, FCC, RoHS. Easily integrates lighting, heating/cooling, door or elevator control systems. Initiates commands by operator, by time schedules,or by events. Built-in capacity to control and respond to external device commands. Allows the clustering of up to 16 uniquely monitored devices easily and compactly. RS-485 host connectivity.

MR16in is a sixteen input sub-controller that can be used for a variety of applications, including status annunciation and alarm monitoring applications such as lighting, heating/cooling, door and elevator control. The panel is dedicated to point control and monitoring, and supports 16 general-purpose input circuits and two programmable relay outputs. The MR16in has the same reliable interface and identical footprint as Series 2, MR16in, enabling seamless upgrades for existing deployments. Easily connect to Series 2 Controllers: SCP-2, SCP-M and EP1501. Easy Expansion: Adds functionality and flexibility to existing access control systems. Features: 16 programmable inputs; 2 programmable relay outputs. AES 128/256 bit data encryption. UL 294 recognized, CE compliant, FCC, RoHS. Configurable input parameters. Initiates commands by operator, by time schedules, or by events. Allows for easy and compact clustering of up to 16 uniquely monitored devices. RS-485 host connectivity.

The LP2500 is an intelligent controller platform with built-in or 'native' network support. Powerful and recognized for flexible high-performance, the LP2500 is Ethernet ready and capable of efficiently managing a large network of access panels in any system design. Once configured, the LP2500 functions independently and is capable of controlling access, managing alarms, interfacing with an array of hardware devices, all while providing the decision-making oversight that each system configuration requires. The LP2500 is capable of elaborate processes and procedures without host intervention. Features: Multi-operating system interface. Multi- host interface communications. Fault- tolerant communications capability. Multi- card format support. Multi- reader technology support. AES 128 bit data encryption. HSPD-12/FIPS201 Compliant. UL 294 Recognized. Alarm keypad support. Function key support. Universal I/O device characterization. Supports bus controllers up to 64 doors.

The LP1502 controller provides a high-performance Ethernet ready, dual card reader panel capable of controlling two doors. Once configured, the LP1502 functions independently and is capable of controlling access, managing alarms and interfacing to an array of reader devices. Reader ports support separate in/out readers of all technologies, including OSDP v1 and v2, Wiegand, clock and data, RS-485, magnetic stripe, keypads, LCD and biometrics. Features: Multi-operating system interface. Multi- host interface communications. Multi- card format support. Multi-reader technology support. AES 128 bit data encryption. HSPD-12/FIPS201 Compliant. UL 294 Recognized. Alarm keypad support. Function key support. Universal I/O device characterization.

MR-52 Series 3 is a dual door sub-controller with on-board flexibility to connect a wide range of security devices. The MR-52 Series 3 sub-controller is easy to install and provides the required I/O for interfacing two card readers, eight general-purpose input monitor points and six control relays to any Authentic Mercury series intelligent controller. The MR-52 Series 3 sub-controller has the same reliable interface and identical footprint as the Series 2, MR-52, which enables seamless upgrades for existing deployments. Features: Multi-facility code support. Multi-reader technology support. AES 128/256 bit data encryption. UL 294 recognized, CE compliant, FCC, RoHS. RS-485 host connectivity. Supports OSDP, OSDP Secure Channel, FICAM government profiles, keypads, biometric readers, Wiegand, clock and data, magnetic stripe, F/2F and supervised F/2F reader technologies.

The LP1501 is a high-performance, Ethernet ready card reader panel and controls a single opening with Power over Ethernet (PoE) capability. The LP1501 seamlessly interfaces a single opening to a larger system for flexible, reliable expansion. The LP1501 can be expanded with up to 17 doors. Once configured the LP1501 functions independently of the host and is capable of elaborate processes while controlling access for a single opening. Without host intervention, the LP1501 can intelligently relate selected system devices and the activity they generate to other devices. The LP1501 interfaces with an array of reader technologies, it provides tremendous flexibility. Reader ports support separate in/out readers of all technologies, including Wiegand, clock and data, RS-485, magnetic stripe, keypads, LCD and biometrics. Features: Multi-operating system interface. Multi- card format support. Multi-reader technology support. AES 128 bit data encryption. HSPD-12/FIPS201 Compliant. UL 294 Recognized. PoE Supported. Alarm keypad support. Function key support.

MR-50 Series 3 is a single door sub-controller dedicated to individual door oversight and provides of all the I/O needed for controlling a single door. Each MR-50 Series 3 sub-controller connects one card reader, two general-purpose input monitor points and two control relays for access control and security monitoring through an Authentic Mercury intelligent controller. The MR-50 Series 3 sub-controller has the same reliable interface and identical footprint as the Series 2, MR-50, which enables seamless upgrades for existing deployments. Features: Multi-facility code support. Multi-reader technology support. AES 128/256 bit data encryption. UL 294 recognized, CE compliant, FCC, RoHS. RS-485 host connectivity. Supports OSDP, OSDP Secure Channel, FICAM government profiles, keypads, biometric readers, Wiegand, clock and data, magnetic stripe, F/2F and supervised F/2F reader technologies.