PIR detector via radio (unidirectional and bidirectional) with 868 or 433 MHz frequency. Complies with EN50131, Grade 2 standards. Range of action up to 10 m and 90°. Small and elegant detector ideal for residential use. Mounting height: 2.4 m. Fully supervised: Sabotage, failure, low battery. It works with 1 lithium battery, type CR123 of 3 V. Autonomy 3 years. Easy replacement of the battery by the end user. Consumption: 10 µA at rest. Operating temperature: -10 to 55 ° C. Dimensions 102.5 x 40.5 x 41.5 mm. Compatible with: Agility / WiComm / WiComm pro from version 5.17, LightSYS from version 5.80 and ProSYS Plus from version 1.2.1.7

Passive infrared detector. Anti-pets (up to 36 kgs) unidirectional wireless, range: 15 meters, frequency: 868Mhz. Intelligent processing of the digital signal, true temperature compensation, protective sensor cover to avoid false alarms caused by insects, pigmented lens for protection against white lights, easy installation by means of support, wall tamper usable in corners, optional lens 3RL0003 12 meters for curtain. Interior installation, mounting height 2.20 to 2.50 meters. CR123 3V lithium battery included. Dimensions 132 x 67.5 x 56 mm. Compatible with RISCO™ unidirectional and bidirectional wireless systems. GRADE 2.

Passive infrared detector Anti-pets via unidirectional radio, reach 8 meters, frequency 868Mhz. Certified EN50131 Grade 2. Dual PIR technology and MW X band, anti-pets, zero angle for short distance detection, Intelligent processing of the digital signal, real temperature compensation, triple resistance RFL incorporate, selectable by bridge, cap tampers and Wall or corner, opto-relay to prevent attack with large magnets. White sun and headlights, blocked by a special mechanism, real temperature compensation. Interior installation, mounting height 2.10 to 2.70 meters. Includes 3 V long-life lithium battery. Dimensions 127.6 x 64.2 x 46.6 mm. Compatible with RISCO™ unidirectional and bidirectional wireless systems.

Passive infrared detector QUAD double PIR, reach 15 meters, Antimasking. EN50131 Grade 3 certificate. Two independent IR dual sensors and two digital processing channels that offer the highest level of detection and immunity against false alarms. Anti-Masking Method with Active IR. Tripe Resistor RFL incorporated, selectable by bridge. Opto-relays to avoid attack with large magnets. Top and wall / corner tampers. Intelligent Digital Signal Processing. Digital detector and true temperature compensation. Built-in RFL resistance. Optional Accessories: Wall bracket with rear tamper, wall / corner ball joint, ball joint. Interior installation, mounting height from 2.10 to 2.70 meters. Power: 9 to 16 VDC. Maximum consumption: 36.5 mA. Dimensions: 127.6 x 64.2 x 46.6 mm.

Passive infrared detector for door opening reach up to 2.4 meters. With IQ Logic and buzzer function. Remote input for the Parallel Door Control - the door lock opens or closes, either after the movement detection of the iREX or from an external device. Adjustable relay interlock time. Single or double use of the door: two "Form C" relays, selectable NC or NO. LED for the step test. IQ Logic™ feature provides greater security by allowing iREX™ motion detection only after an external device has been activated (such as a ground switch, an additional PIR, or a disarmed burglar alarm system). Safe Door Mode that prevents unauthorized persons from entering after a valid exit. Internal buzzer - 85dB with adjustable volume and direct external activation. The Door Alarm Mode activates the buzzer if the door is forced open or left open for a long time. Cover tamper output. Interior installation, mounting height: from 2.30 to 4.60 meters. Power from 12 to 30VDC / VAC. Dimensions 177 x 50 x 45 mm.

Reach 15 meters. EN50131 Grade 2 Certificate. Based on the advanced detection technologies of the RISCO™ Group, DigiSense has been designed to ensure superior detection performance and false alarm immunity. Because the housing of all models has the same compact design, the installer can mix DigiSense detectors of different technologies in the same installation, keeping the same overall appearance. Interior installation, mounting height from 2 to 2.7 meters. Power: 9 to 16 VDC. Maximum consumption: 36.5 mA. Dimensions: 106 x 60 x 47 mm.

Reach 15 meters. EN50131 Grade 2 Certificate. Based on the advanced detection technologies of the RISCO™ Group, DigiSense™ has been designed to ensure superior detection performance and false alarm immunity. Because the housing of all models has the same compact design, the installer can mix DigiSense detectors of different technologies in the same installation, keeping the same overall appearance. Double RFL. Ball joint included. Interior installation, mounting height from 2 to 2.7 meters. Power: 9 to 16 VDC. Maximum consumption: 36.5 mA. Dimensions: 106 x 60 x 47 mm.

Reach 12m diameter. EN50131 Grade 2 Certificate. LuNAR™ PIR is a discrete profile ceiling mounted digital detector, designed with the most advanced components to ensure reliable operation in a wide range of applications. The LuNAR™ PIR employs a dual-element PIR sensor with real digital temperature compensation, and also provides 360 ° coverage thanks to a wide-angle Fresnel lens. Interior installation, mounting height from 2.8 to 4 meters. Power: 9 to 16 VDC. Maximum consumption: 15 mA at 12VDC. Dimensions: Ø135 x 27 mm.

Passive infrared detector QUAD, reach 15 meters and antimasking. Internal protection of the PCB. Simple and elegant design with a single convex lens. Anti-masking by Active IR. RISCO™ bus connection that includes an additional zone input for the connection of a contact or any relay detector, thereby saving the wiring of the detector to the central unit. Opto-relays for protection against the attack of large magnets. Tampers: cover and wall / corner. Corridor lenses (optional). BWare™ Wall / Ceiling Bracket RA51T (optional). Interior installation Power: 9 to 16 VDC. Maximum consumption: 41 mA. Dimensions: 127.6 x 64.2 x 46.6 mm.

Adjustable support for PIR TAKEX® wall/roof mounting motion detector. Requires BW-14. measures 140 x 60 x 110 mm (Box).

Mount bracket with clam for all outdoor PIR models.

SB01 Wall tamper kit

Transmisor de prueba remota instalable dentro del detector sísmico (prueba G3) UTC™.

Placa de montaje de detectores sísmicos UTC™ para facilitar su instalación sobre superficies de acero. Dimensiones: 80 x 10 x 5 mm.

Caja de conexionado protegida contra perforaciones y apertura. 26 terminales.

Juego de cables blindados con conducto flexible de acero inoxidable y cable de 8 hilos. 2 metros de longitud.

Espaciador para la placa de protección de cerradura VM652P que hace de adaptador para las placas de cerraduras prominentes. Dimensiones: 80 x 80 x 5 mm.

Kit de montaje de detectores sísmicos. Placa de protección de cerradura con palanca de acero reforzado para proteger el ojo de la cerradura. Dimensiones: 81 x 97 x 10 mm.

Kit de montaje Día / noche para montaje de detectores sísmicos UTC™. Dimensiones: 58 x 72 x 3 mm.

Caja de montaje empotrado que se utiliza para instalar detectores sísmicos UTC™ en suelos y techos. Dimensiones: 140 x 170 x 70 mm.

UTC™ seismic detector kit for inclemency mounting. Dimensions: 120 x 185 x 55 mm.

Caja de montaje empotrado que se utiliza para instalar detectores sísmicos UTC™ en muros de hormigón durante la construcción. Dimensiones: 140 x 170 x 70 mm.

Laser pointer, Recommended accessory to adjust VE700 long-Range detectors. Laser focus system. Power supply from the detector. Quick anchoring system.

Wall or roof mounting bracket for EV100, EV1000, VE1000 y DD1000 series of detectors.