English
Español
  • Search
    • +34 902930427

    0.00 €

    Fire Specials

    Products 95
    KILSEN® Power Supply with Tamper Switch (24VDC-5Amp) [PM865]
    KILSEN® Power Supply with Tamper Switch (24VDC-5Amp)
    Ref.: PM865
    Power supply unit. Output: 24V. Mounted in a box and with a battery charger. Requires 2 batteries BS122N reference (Not included). Operating temperature: -10ºC to 40ºC. Dimensions: 330 x 275 x 80mm. Amperage 5.0A.
    V.A.T. included
    521.45 €
    KILSEN® Power Supply with Tamper Switch (24VDC-3Amp) [PM863]
    KILSEN® Power Supply with Tamper Switch (24VDC-3Amp)
    Ref.: PM863
    Power supply unit. Output: 24V. Mounted in a box and with a battery charger. Requires 2 batteries BS122N reference (Not included). Operating temperature: -10ºC to 40ºC. Dimensions: 330 x 275 x 80mm. Amperage 3.0A.
    V.A.T. included
    388.58 €
    UTC™ GST® Intelligent PSU (24VDC 5A /w Display, Excl. Batteries) [PSU24-5]
    UTC™ GST® Intelligent PSU (24VDC 5A /w Display, Excl. Batteries)
    Ref.: PSU24-5
    24 volt DC intelligent PSU, 5 ampere version. Digital display showing output voltage and load current. Fully monitored with output protection. Mains supply 230VAC (+10/-15%), 50Hz. Max. Battery Size: 24VDC /12AH sealed lead battery. Dimension: 400 x 318 x 128 mm.
    V.A.T. included
    Consult
    UTC™ GST® Intelligent Addr. PSU (24VDC 10A) [PSU24-10A]
    UTC™ GST® Intelligent Addr. PSU (24VDC 10A)
    Ref.: PSU24-10A
    24 volt DC intelligent PSU, 10 ampere version. Digital display showing output voltage and load current. Fully monitored with output protection. Addressable intelligence for monitoring and reporting to main fire alarm panel. Mains supply 110 ~ 230VAC, 50/60Hz. Max. Battery Size: 24VDC /24AH sealed lead battery. Dimension: 520 x 350 x 156 mm.
    V.A.T. included
    Consult
    UTC™ GST® Intelligent PSU (24VDC 10A, Excl. Batteries) [PSU24-10]
    UTC™ GST® Intelligent PSU (24VDC 10A, Excl. Batteries)
    Ref.: PSU24-10
    24 volt DC intelligent PSU, 10 ampere version. Digital display showing output voltage and load current. Fully monitored with output protection. Mains supply 110 ~ 230VAC, 50/60Hz. Max. Battery Size: 24VDC /24AH sealed lead battery. Dimension: 520 x 350 x 156 mm.
    V.A.T. included
    Consult
    UTC™ Aritech™ Smart Power Supply (24VDC-5Amp) [PM705C]
    UTC™ Aritech™ Smart Power Supply (24VDC-5Amp)
    Ref.: PM705C
    Monitored power supply unit at 24V. Mounted in a box and with a battery charger up to 17Ah. Requires 2 batteries BS131N reference (Not included). With CPR, EN54-4 and VDS Certificates. Overload protection. Fault relay output. Battery discharge protection. Operating temperature: -10ºC to 40ºC. Dimensions: 400 x 420 x 80mm. Amperage 5A + 1,6A for battery charging.
    V.A.T. included
    1,089.35 €
    PULSAR® Homologated EN54C (Fires) Power Supply - 27,6V/5A/2x40Ah/LCD [EN54C-5A40LCD]
    PULSAR® Homologated EN54C (Fires) Power Supply - 27,6V/5A/2x40Ah/LCD
    Ref.: EN54C-5A40LCD
    EN54 / LCD series switched mode and regulated power supply (with a transformer), for approved fire protection systems. Dimensions: 420 x 407 x 178 mm, Input: 230 VAC (-15% / + 10%), Output: 3.2 A / 27.6 VDC - for continuous operation, 5.0 A / 27.6 VDC - for intermittent operation, with tamper tamper: 1xNC for protection against sabotage. Space for 12V SLA battery (2x40Ah), SCP, OLP, OVP, UVP protections. Technical outputs: EPS (AC grid failure) and ALARM (collective failure). technical inputs: EXTi (external fault). Complies with EN54-4, EN12101-10, CNBOP-PIB No 1438-CPR-0628 and CNBOP-PIB No. 3501/2019 for fire alarm systems. 142W.
    V.A.T. included
    752.14 €
    PULSAR® Homologated EN54C (Fires) Power Supply - 27,6V/5A/2x17Ah/LCD [EN54C-5A17LCD]
    PULSAR® Homologated EN54C (Fires) Power Supply - 27,6V/5A/2x17Ah/LCD
    Ref.: EN54C-5A17LCD
    EN54 / LCD series switched mode and regulated power supply (with a transformer), for approved fire protection systems. Dimensions: 385 x 402 x 88 mm, Input: 230 VAC (-15% / +10%), Output: 4.2 A / 27.6 VDC - for continuous operation, 5.0 A / 27.6 VDC - for intermittent operation, with tamper tamper: 1xNC for protection against sabotage. Space for 12V SLA battery (2x17Ah), SCP, OLP, OVP, UVP protections. Technical outputs: EPS (AC grid failure) and ALARM (collective failure). technical inputs: EXTi (external fault). Complies with EN54-4, EN12101-10, CNBOP-PIB No 1438-CPR-0628 and CNBOP-PIB No. 3501/2019 for fire alarm systems. 142W.
    V.A.T. included
    675.91 €
    PULSAR® Homologated EN54C (Fires) Power Supply - 27,6V/3A/2x17Ah/LCD [EN54C-3A17LCD]
    PULSAR® Homologated EN54C (Fires) Power Supply - 27,6V/3A/2x17Ah/LCD
    Ref.: EN54C-3A17LCD
    EN54 / LCD series switched mode and regulated power supply (with a transformer), for approved fire protection systems. Dimensions: 385 x 402 x 88 mm, Input: 230 VAC (-15% / +10%), Output: 2.2 A / 27.6 VDC - for continuous operation, 3.0 A / 27.6 VDC - for intermittent operation, with tamper tamper: 1xNC for protection against sabotage. Space for 12V SLA battery (2x17Ah), SCP, OLP, OVP, UVP protections. Technical outputs: EPS (AC grid failure) and ALARM (collective failure). technical inputs: EXTi (external fault). Complies with EN54-4, EN12101-10, CNBOP-PIB No 1438-CPR-0628 and CNBOP-PIB No. 3501/2019 for fire alarm systems. 85.2W.
    V.A.T. included
    647.96 €
    PULSAR® Homologated EN54C (Fires) Power Supply - 27,6V/10A/2x17Ah/LCD [EN54C-10A17LCD]
    PULSAR® Homologated EN54C (Fires) Power Supply - 27,6V/10A/2x17Ah/LCD
    Ref.: EN54C-10A17LCD
    EN54 / LCD series switched mode and regulated power supply (with a transformer), for approved fire protection systems. Dimensions: 385 x 402 x 88 mm, Input: 230 VAC (-15% / + 10%), Output: 9.2 A / 27.6 VDC - for continuous operation, 10.0 A / 27.6 VDC - for intermittent operation, with tamper tamper: 1xNC for protection against sabotage. Space for 12V SLA battery (2x17Ah), SCP, OLP, OVP, UVP protections. Technical outputs: EPS (AC grid failure) and ALARM (collective failure). technical inputs: EXTi (external fault). Complies with EN54-4, EN12101-10, CNBOP-PIB No 1438-CPR-0628 and CNBOP-PIB No. 3501/2019 for fire alarm systems. 284W.
    V.A.T. included
    752.14 €
    PULSAR® Homologated EN54C (Fires) Power Supply - 27,6V/7A/2x40Ah/LCD [EN54C-10A40LCD]
    PULSAR® Homologated EN54C (Fires) Power Supply - 27,6V/7A/2x40Ah/LCD
    Ref.: EN54C-10A40LCD
    EN54 / LCD series switched mode and regulated power supply (with a transformer), for approved fire protection systems. Dimensions: 420 x 407 x 178 mm, Input: 230 VAC (-15% / + 10%), Output: 8.2 A / 27.6 VDC - for continuous operation, 10.0 A / 27.6 VDC - for intermittent operation, with tamper tamper: 1xNC for protection against sabotage. Space for 12V SLA battery (2x40Ah), SCP, OLP, OVP, UVP protections. Technical outputs: EPS (AC grid failure) and ALARM (collective failure). technical inputs: EXTi (external fault). Complies with EN54-4, EN12101-10, CNBOP-PIB No 1438-CPR-0628 and CNBOP-PIB No. 3501/2019 for fire alarm systems. 284W.
    V.A.T. included
    828.37 €
    HONEYWELL™ Power Supply Unit EN54-4A2 of 130W / 5A [HLSPS50]
    HONEYWELL™ Power Supply Unit EN54-4A2 of 130W / 5A
    Ref.: HLSPS50
    130W Switched power supply at 24VDC monitored by microprocessor. Its composed by a power source, a control/signalling circuit and a metal cabine with capacity to host batteries up to 17Ah, except 10-12Ah batteries. Includes 10 LEDs for status indications in the front and 7 intern LEDs that expend the information about system faillures. With 2 output circuits (2 x 2.20 Amp), can be switched into only one (1 x 4.40 Amp), protected against short-circuit through electronic fuses. Consist of manual and automatic batteries test, ground derivation monitoring and relay circuit for system fault. Each source requires 2 batteries with 12VDC output with the necessary capacity for each case. Compatible batteries: 12V/ 7Ah-17Ah Lead-Acid with ri < 700 mOhm. Batteries not included.
    V.A.T. included
    579.99 €
    HONEYWELL™ Power Supply Unit EN54-4A2 of 65W / 2.5A [HLSPS25]
    HONEYWELL™ Power Supply Unit EN54-4A2 of 65W / 2.5A
    Ref.: HLSPS25
    65W Switched power supply at 24VDC monitored by microprocessor. Its composed by a power source, a control/signalling circuit and a metal cabine with capacity to host batteries up to 17Ah, except 10-12Ah batteries. Includes 10 LEDs for status indications in the front and 7 intern LEDs that expend the information about system faillures. With 2 output circuits (2 x 1.10 Amp), can be switched into only one (1 x 2.20 Amp), protected against short-circuit through electronic fuses. Consist of manual and automatic batteries test, ground derivation monitoring and relay circuit for system fault. Each source requires 2 batteries with 12VDC output with the necessary capacity for each case. Compatible batteries: 12V/ 7Ah-17Ah Lead-Acid with ri < 700 mOhm. Batteries not included.
    V.A.T. included
    472.43 €
    NOTIFIER® Converter Module [020-543]
    NOTIFIER® Converter Module
    Ref.: 020-543
    Voltage converter module for source of power supply 020-579 that includes cables and fuses. Its mounted in standard panel chasis 020-538-001. Its always necessary to install a 020-579.
    V.A.T. included
    1,824.98 €
    NOTIFIER® ID3000 7Amp Power Supply [020-579]
    NOTIFIER® ID3000 7Amp Power Supply
    Ref.: 020-579
    Source of power supply for ID3000 systems, configurable from 4,5 to 7A. Includes interconnecting cables and fuses. It can be install inside of ref 020-474-009 cabin (Only recommended for power supply of 4,5A) or in the power supply cabin ref 020-541-009. Capacity to charge 130Ah batteries. Available current configured from 7A, 4A at rest and 7A in alarm. Requires power supply converter 020-543.
    V.A.T. included
    3,021.89 €
    NOTIFIER® ID3000 3Amp Power Supply [020-648]
    NOTIFIER® ID3000 3Amp Power Supply
    Ref.: 020-648
    Source of power supply for ID3000 systems that includes interconnecting cables and fuses. Its mounted in 020-535-001 standard equipment.
    V.A.T. included
    1,552.25 €
    NOTIFIER® LEDs Module [020-548]
    NOTIFIER® LEDs Module
    Ref.: 020-548
    LEDs module for power supply status indication 020-579 if its mounted in cabin ref 020-541-009.
    V.A.T. included
    Consult
    NOTIFIER® Blind Cover for 19” Rack Power Supply [020-595]
    NOTIFIER® Blind Cover for 19” Rack Power Supply
    Ref.: 020-595
    6U Blind cover for power supply mounting of 4,5A or 7A.
    V.A.T. included
    Consult
    NOTIFIER® 020-579 Metal Cabinet [020-541-009]
    NOTIFIER® 020-579 Metal Cabinet
    Ref.: 020-541-009
    Metal cabin recommended to install 020-579 power supply for independent mounting of the panel (Indispensable for F.A configured in 7A). Capacity to host batteries up to 78 Ah. Requires the LEDs indicator module.
    V.A.T. included
    Consult
    PULSAR® Homologated EN 54 (Fires) Power Supply - 27.6V/7A/2x40Ah/LCD [EN54-7A40LCD]
    PULSAR® Homologated EN 54 (Fires) Power Supply - 27.6V/7A/2x40Ah/LCD
    Ref.: EN54-7A40LCD
    Switch mode buffer power supply unit (with a transformer) EN54/LCD series. Dimensions: 420 x 420 x 182 mm, Input: 230V AC (-15%/+10%), Output: 5,0A / 27,6VDC - for continuous operation, 7,0A / 27,6VDC - for intermittent operation, tamper: 1xNC anti-sabotage protection. Space for battery 12V SLA ( 2x40Ah ), battery protection (UVP). Technical outputs: EPS (AC network failure), PSU (power supply failure) and APS (battery failure). Compliant with EN54-4 for fire alarm systems.
    V.A.T. included
    Consult
    PULSAR® Homologated EN 54 (Fires) Power Supply - 27.6V / 3A / 2x28Ah [EN54-3A28]
    PULSAR® Homologated EN 54 (Fires) Power Supply - 27.6V / 3A / 2x28Ah
    Ref.: EN54-3A28
    Switch mode buffer power supply unit (with a transformer) EN54/LED series. Dimensions: 420 x 420 x 182 mm, Input: 230V AC (-15%/+10%), Output: 1,5A / 27,6VDC - for continuous operation, 3,0A / 27,6VDC - for intermittent operation, tamper: 1xNC anti-sabotage protection. Space for battery 12V SLA ( 2x28Ah ), battery protection (UVP). Technical outputs: EPS (AC network failure), PSU (power supply failure) and APS (battery failure). Compliant with EN54-4 for fire alarm systems.
    V.A.T. included
    Consult
    PULSAR® Homologated EN 54 (Fires) Power Supply - 27.6V / 7A / 2x28Ah [EN54-7A28]
    PULSAR® Homologated EN 54 (Fires) Power Supply - 27.6V / 7A / 2x28Ah
    Ref.: EN54-7A28
    Switch mode buffer power supply unit (with a transformer) EN54/LED series. Dimensions: 420 x 420 x 182 mm, Input: 230V AC (-15%/+10%), Output: 5,5A / 27,6VDC - for continuous operation, 7,0A / 27,6VDC - for intermittent operation, tamper: 1xNC anti-sabotage protection. Space for battery 12V SLA ( 2x28Ah ), battery protection (UVP). Technical outputs: EPS (AC network failure), PSU (power supply failure) and APS (battery failure). Compliant with EN54-4 for fire alarm systems.
    V.A.T. included
    Consult
    PULSAR® Homologated EN 54 (Fires) Power Supply - 27.6V / 2A / 2x17Ah [EN54-2A17]
    PULSAR® Homologated EN 54 (Fires) Power Supply - 27.6V / 2A / 2x17Ah
    Ref.: EN54-2A17
    Switch mode buffer power supply unit (with a transformer) EN54/LED series. Dimensions: 420 x 420 x 102 mm, Input: 230V AC (-15%/+10%), Output: 1,0A / 27,6VDC - for continuous operation, 2,0A / 27,6VDC - for intermittent operation, tamper: 1xNC anti-sabotage protection. Space for battery 12V SLA ( 2x17Ah ), battery protection (UVP). Technical outputs: EPS (AC network failure), PSU (power supply failure) and APS (battery failure). Compliant with EN54-4 for fire alarm systems.
    V.A.T. included
    Consult
    PULSAR® Homologated EN 54 (Fires) Power Supply - 27.6V / 5A / 2x28Ah [EN54-5A28]
    PULSAR® Homologated EN 54 (Fires) Power Supply - 27.6V / 5A / 2x28Ah
    Ref.: EN54-5A28
    Switch mode buffer power supply unit (with a transformer) EN54/LED series. Dimensions: 420 x 420 x 182 mm, Input: 230V AC (-15%/+10%), Output: 3,5A / 27,6VDC - for continuous operation, 5,0A / 27,6VDC - for intermittent operation, tamper: 1xNC anti-sabotage protection. Space for battery 12V SLA ( 2x28Ah ), battery protection (UVP). Technical outputs: EPS (AC network failure), PSU (power supply failure) and APS (battery failure). Compliant with EN54-4 for fire alarm systems.
    V.A.T. included
    Consult
    SYSAWAY© 2024 All rights reserved