English
Español
  • Search
    • +34 902930427

    0.00 €

    Intercom & Networking

    Products 104
    AmbientSystem™ Power Supply Controller [EST-PSM48]
    AmbientSystem™ Power Supply Controller
    Ref.: EST-PSM48
    EST-PSM48 Power Supply Manager is designed for distribution of DC Power Supply from Power Supply Units (PSU) and a back-up battery. The unit controls battery charging and distributes power supply to all Voice Evacuation System (VES) equipment at max 60 A. When the system uses battery back-up, the power supplied is 3.2 kW (48 V). EST-PSM48 cooperates with the 4 x 12 V VRLA battery bank. It maintains the bank in charged condition, ensures temperature compensation of charging parameters and monitors serial resistance of the battery and its wiring as specified in Exhibit No. A2 to the EN54-4 Standard.
    V.A.T. included
    2,456.52 €
    AmbientSystem™ Power Supply Combiner [EST-PSC]
    AmbientSystem™ Power Supply Combiner
    Ref.: EST-PSC
    EST-PSC is a Power Supply Combiner from EST-PS48800.
    V.A.T. included
    822.84 €
    AmbientSystem™ PS48800 52VDC 15.4Amp Power Supply Unit [EST-PS48800]
    AmbientSystem™ PS48800 52VDC 15.4Amp Power Supply Unit
    Ref.: EST-PS48800
    EST-PS48800 is designed for assembling in a dedicated EST-PF4 Power Supply Unit Frame. The elements of the system are designed for assembling in a Rack 19'' IP30-type. Key Features: Power consumption: 885 W max. (3.85 A). AC power supply 230 VAC +10% -15%, 50/60Hz, 3.85 A Wire with IEC 60320 C13 3x0,75 mm2 coupling (supplied with the unit). Certification: EN54-4. Standards: EN12101-10.
    V.A.T. included
    999.76 €
    VRS122000EBA Power Supply for UTC™ IFS® Equipment [VRS122000EBA]
    VRS122000EBA Power Supply for UTC™ IFS® Equipment
    Ref.: VRS122000EBA
    It is designed to supply low voltage power for standalone IFS® modules. These power supplies accept universal mains input voltages from 100 – 253VAC, and provide a regulated 12VDC output with a maximum load of 1Amp. This unit is only suitable for installation as permanently connected equipment. The PSU is NOT SUITABLE for direct external installation, unless fitted within an appropriate IP rated enclosure. The PSU should be installed according to all relevant safety regulations applicable to the application. This unit must be fed from a mains power source having a separate (approved) disconnect device and fitted with a fuse or other over-current protection device rated at 3A maximum. Ensure that the disconnect device used has appropriate earth fault protection to the applicable standard.
    V.A.T. included
    52.60 €
    PS48VDC.38A-EU Power Supply for UTS ™ IFS® Equipment [PS48VDC.38A-EU]
    PS48VDC.38A-EU Power Supply for UTS ™ IFS® Equipment
    Ref.: PS48VDC.38A-EU
    Power supply for switches and media converters, input power 100-240VAC, output 48VDC / 0.38A (18W). Operating temperature 0º to + 50 ° C.
    V.A.T. included
    37.80 €
    12V 2Amp 20W for VCC-64 PSU [AC05089]
    12V 2Amp 20W for VCC-64 PSU
    Ref.: AC05089
    It allows the connection of up to 4 devices VCC-64.
    V.A.T. included
    Consult
    TOA™ VX-200PS Power Supply Unit [Y4940T]
    TOA™ VX-200PS Power Supply Unit
    Ref.: Y4940T
    This Power Supply Unit is mounted in the VX-2000PF Power Supply Frame when in use. There are 2 DC output channels per unit. Use the VX-200PS in the number suited to the required total system power. Power Source: 230 V AC, 50/60 Hz. Power Consumption: 580 W. Weight: 14,5 kg.
    V.A.T. included
    Consult
    TOA™ VX-3000DS Emergency Power Supply [Y4941PS]
    TOA™ VX-3000DS Emergency Power Supply
    Ref.: Y4941PS
    The VX-3000DS is an emergency power supply manager used for the SX-2000, VX-2000 and VM-3000 systems. It is a 3U rack-mountable unit equipped with a battery charger and double-switching power supplies, which contribute to rack space, energy savings and lightweight design. The VX-3000DS is characterized by its easy maintenance, as the function setting switch and the kill switch are located inside the front panel, and the fuse change can be done at the rear of the unit. DC power supply to all system components. Combination of two integrated power supplies with a high performance charger. Automatic switch to auxiliary battery power if AC power supply does not work. VX-3000DS: EN 54-4 Certification, Certificate No. 1134-CPR-137.
    V.A.T. included
    Consult
    TOA™ VX-3150DS Emergency Power Supply [Y4949P1]
    TOA™ VX-3150DS Emergency Power Supply
    Ref.: Y4949P1
    DC power supply to all system components. Combination of integrated power supply with a high performance charger. Automatic switch to auxiliary battery power if AC power supply does not work. VX-3150DS: EN 54-4 Certification, Certificate No. 1134-CPR-137.
    V.A.T. included
    Consult
    TOA™ AD-246ER Power Supply Unit [Y4986]
    TOA™ AD-246ER Power Supply Unit
    Ref.: Y4986
    25 VCC and 200 mA Power Supply, for microphone desks for VM-300 system, RM-200M and RM-300MF. Weight: 420 g.
    V.A.T. included
    Consult
    TOA™ VX-2000PF Power Supply Frame [Y4940S]
    TOA™ VX-2000PF Power Supply Frame
    Ref.: Y4940S
    This Power Supply Frame permits the VX-200PS Power Supply Unit to be mounted in an equipment rack. Up to 3 VX-200PS units can be installed in the unit. Usable Unit: VX-200PS (up to 3). Dimensions: 483 x 132,6 x 324,8 mm. Weight: 4,8 kg.
    V.A.T. included
    Consult
    TOA™ VX-2000DS Emergency Power Supply Unit [Y4940R]
    TOA™ VX-2000DS Emergency Power Supply Unit
    Ref.: Y4940R
    Emergency Power Supply Unit supplies the DC power to each equipment in the VX-2000 system by connecting the VX-200PS Power Supply Unit. It keeps the battery unit that contains 2 × 12 V sealed lead batteries charged compensating for the temperature of the battery charging voltage. When the DC power supply from the VX-200PS stops, the VX-2000DS is automatically switched to the backup battery. Dimensions: 482 x 88,4 x 377,6 mm. Weight: 580 g.
    V.A.T. included
    Consult
    VRS121000EES Power Supply for UTC™ IFS® Equipment [VRS121000EES]
    VRS121000EES Power Supply for UTC™ IFS® Equipment
    Ref.: VRS121000EES
    It is designed to supply low voltage power for standalone IFS® modules. These power supplies accept universal mains input voltages from 100 – 253VAC, and provide a regulated 12VDC output with a maximum load of 1Amp. This unit is only suitable for installation as permanently connected equipment. The PSU is NOT SUITABLE for direct external installation, unless fitted within an appropriate IP rated enclosure. The PSU should be installed according to all relevant safety regulations applicable to the application. This unit must be fed from a mains power source having a separate (approved) disconnect device and fitted with a fuse or other over-current protection device rated at 3A maximum. Ensure that the disconnect device used has appropriate earth fault protection to the applicable standard.
    V.A.T. included
    Consult
    VRS121000EBS Power Supply for UTC™ IFS® Equipment [VRS121000EBS]
    VRS121000EBS Power Supply for UTC™ IFS® Equipment
    Ref.: VRS121000EBS
    It is designed to supply low voltage power for standalone IFS® modules. These power supplies accept universal mains input voltages from 100 – 253VAC, and provide a regulated 12VDC output with a maximum load of 1Amp. This unit is only suitable for installation as permanently connected equipment. The PSU is NOT SUITABLE for direct external installation, unless fitted within an appropriate IP rated enclosure. The PSU should be installed according to all relevant safety regulations applicable to the application. This unit must be fed from a mains power source having a separate (approved) disconnect device and fitted with a fuse or other over-current protection device rated at 3A maximum. Ensure that the disconnect device used has appropriate earth fault protection to the applicable standard.
    V.A.T. included
    Consult
    PS48VDC240W-EU / UK Power Supply for UTS ™ IFS® Equipment [PS48VDC240W-EU/UK]
    PS48VDC240W-EU / UK Power Supply for UTS ™ IFS® Equipment
    Ref.: PS48VDC240W-EU/UK
    Power supply for switches, input power 100-240VAC, output at 48 VDC / 5A (240W). Operating temperature -40º to 70º C.
    V.A.T. included
    Consult
    UTC™ IFS® 515R1 Internal PSU [515PS1]
    UTC™ IFS® 515R1 Internal PSU
    Ref.: 515PS1
    The 515PS1 Internal Rack Power Supply is designed to provide power to a 517R1 Card Cage Rack. The unit provides a single 13.5 VDC output operating at 6 amps. The power supply accepts an AC input voltage from 100 to 240 VAC, 60/50 Hz. A second power supply can be installed in the 515R1 Rack to provide redundancy.
    V.A.T. included
    Consult
    UTC™ IFS® PSUs for Media Converter Rack [ MCR-RPS]
    UTC™ IFS® PSUs for Media Converter Rack
    Ref.: MCR-RPS
    Redundant 130 Watt PSU For Media Converter Rack. Operating temperature: 0 to +50°C.
    V.A.T. included
    Consult
    613P-EU Power Supply for UTS ™ IFS® Equipment [613P-EU]
    613P-EU Power Supply for UTS ™ IFS® Equipment
    Ref.: 613P-EU
    Power supply for switches and media converters, input power 100-240VAC, output at 13.5VDC / 1.33A (18W).
    V.A.T. included
    Consult
    613P-EU Power Supply for UTS ™ IFS® Equipment [613P-UK]
    613P-EU Power Supply for UTS ™ IFS® Equipment
    Ref.: 613P-UK
    Power supply for switches and media converters, input power 100-240VAC, output at 13.5VDC / 1.33A (18W).
    V.A.T. included
    Consult
    2N® PoE Injector [91378100]
    2N® PoE Injector
    Ref.: 91378100
    Provides power to the intercom through the Ethernet cable when the PoE switch is not available. Suitable for IP Force, IP Audio Kit and IP Safety models.
    V.A.T. included
    81.68 €
    2N® 12VDC/2Amp Power Adapter [91378380]
    2N® 12VDC/2Amp Power Adapter
    Ref.: 91378380
    12VDC / 2Amp stabilized source designed for installation in the recessed box under the plaster. Ideal for use in those cases where PoE power is not available. Suitable for Indoor Touch models.
    V.A.T. included
    137.94 €
    PS48VDC72W-EU Power Supply for UTS ™ IFS® Equipment [PS48VDC72W-EU]
    PS48VDC72W-EU Power Supply for UTS ™ IFS® Equipment
    Ref.: PS48VDC72W-EU
    Power supply for switches, input power 100-240VAC, output 48 VDC / 1.16A (72W).
    V.A.T. included
    Consult
    PS56VDC72W-EU Power Supply for UTS ™ IFS® Equipment [PS56VDC72W-EU]
    PS56VDC72W-EU Power Supply for UTS ™ IFS® Equipment
    Ref.: PS56VDC72W-EU
    Power supply for switches, input power 100-240VAC, output at 56 VDC / 1.28A (72W).
    V.A.T. included
    Consult
    614P Power Supply for UTS ™ IFS® Equipment [614P]
    614P Power Supply for UTS ™ IFS® Equipment
    Ref.: 614P
    Power supply 13.5VDC / 110-240VAC. 2A for standalone modules.
    V.A.T. included
    Consult
    SYSAWAY© 2024 All rights reserved