English
Español
  • Search
    • +34 902930427

    0.00 €

    Sources & Batteries

    Products 1037
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    PULSAR® HPB Serie 12 VDC/200Ah Battery (5-8 Years Lifespan) [HPB200-12]
    PULSAR® HPB Serie 12 VDC/200Ah Battery (5-8 Years Lifespan)
    Ref.: HPB200-12
    HPB batteries are maintenance-free Valve Regulated Lead Acid Batteries with self-regulating one-sided safety valves and internal gas recombination. The batteries are made in AGM (Absorbent Glass Mat) technology; the electrolyte is held in the glass mat. The technology used allows installing batteries in places with natural (gravity) ventilation and minimizes maintenance. They are dedicated for devices requiring emergency power to a load when the input power source or mains power fails, such as: buffer power supplies used, among others, in CCTV systems, alarm systems (Intrusion Detection Systems, IDS), and access control systems (ACS), UPS units, etc... Nominal voltage: 12 VDC. Nominal capacity: 200 Ah. Projected lifespan: 5 to 8 years at 20°C. Charging current: Recommended 20 Amp, Maximum 60 Amp. Dimensions: W=524 H=222 D=238 [mm, +/-2].
    V.A.T. included
    Consult
    PULSAR® HPB Serie 12 VDC/100Ah Battery (5-8 Years Lifespan) [HPB100-12]
    PULSAR® HPB Serie 12 VDC/100Ah Battery (5-8 Years Lifespan)
    Ref.: HPB100-12
    HPB batteries are maintenance-free Valve Regulated Lead Acid Batteries with self-regulating one-sided safety valves and internal gas recombination. The batteries are made in AGM (Absorbent Glass Mat) technology; the electrolyte is held in the glass mat. The technology used allows installing batteries in places with natural (gravity) ventilation and minimizes maintenance. They are dedicated for devices requiring emergency power to a load when the input power source or mains power fails, such as: buffer power supplies used, among others, in CCTV systems, alarm systems (Intrusion Detection Systems, IDS), and access control systems (ACS), UPS units, etc... Nominal voltage: 12 VDC. Nominal capacity: 100 Ah. Projected lifespan: 5 to 8 years at 20°C. Charging current: Recommended 10 Amp, Maximum 30 Amp. Dimensions: W=330 H=219 D=171 [mm, +/-2].
    V.A.T. included
    576.81 €
    PULSAR® SCB Serie 12 VDC/1.2Ah Battery (3-5 Years Lifespan) [SCB1.2-12]
    PULSAR® SCB Serie 12 VDC/1.2Ah Battery (3-5 Years Lifespan)
    Ref.: SCB1.2-12
    SCB batteries are maintenance-free Valve Regulated Lead Acid Batteries with self-regulating one-sided safety valves and internal gas recombination. The batteries are made in AGM (Absorbent Glass Mat) technology; the electrolyte is held in the glass mat. The technology used allows installing batteries in places with natural (gravity) ventilation and minimizes maintenance. They are dedicated for devices requiring emergency power to a load when the input power source or mains power fails, such as: buffer power supplies used, among others, in CCTV systems, alarm systems (Intrusion Detection Systems, IDS), and access control systems (ACS), UPS units, etc... Nominal voltage: 12 VDC. Nominal capacity: 1.2 Ah. Projected lifespan: 3 to 5 years at 20°C. Charging current: Recommended 0.12 Amp, Maximum 0.36 Amp. Dimensions: W = 98 , H = 59 , D = 44 [mm, +/-2].
    V.A.T. included
    Consult
    UTC™ 12 VDC 1700mA Battery Pack for Siren [BS170-N]
    UTC™ 12 VDC 1700mA Battery Pack for Siren
    Ref.: BS170-N
    Lithium battery pack for indoor sirens, 3x CR123 - 9V 1700mA (packed by 2). Maintenance-free Lithium Battery. Wide operating temperature range. Long service life. Suitable for AS27x Siren Series.
    V.A.T. included
    48.97 €
    UTC™ RF-7220-07-1 (Wireless) Siren Battery Pack [BS7201-N]
    UTC™ RF-7220-07-1 (Wireless) Siren Battery Pack
    Ref.: BS7201-N
    Battery pack for wireless outdoor siren, RF-7220-07-1. Operating voltage: 12.5 V (nominal). Operating temperature: -40 to +72 °C. Storage temperature: -55 to +85 °C; +35 °C (max. recommended). Compliancy: CE,? RoHS 2,? WEEE, UN 3090 Class 9.
    V.A.T. included
    169.74 €
    UTC™ AA 6VDC Battery Pack (25 Units) [BS36V]
    UTC™ AA 6VDC Battery Pack (25 Units)
    Ref.: BS36V
    SAFT ,6 Volt, 1/2 AA lithium Battery (box of 25).
    V.A.T. included
    6.68 €
    UTC™ Interlogix® Lead Battery 12VDC 0.8Ah [BS120N]
    UTC™ Interlogix® Lead Battery 12VDC 0.8Ah
    Ref.: BS120N
    12VDC 0.8 Ah sealed lead battery. Dimensions: 96 x 62 x 25 mm. Calcium-lead grid for longer life. Wide operating temperature range. Usable and replaceable in any position. Low level of self-discharge and long service life. Leak proof construction. High discharge level capability.
    V.A.T. included
    34.71 €
    AmbientSystem™ Power Supply Controller [EST-PSM48]
    AmbientSystem™ Power Supply Controller
    Ref.: EST-PSM48
    EST-PSM48 Power Supply Manager is designed for distribution of DC Power Supply from Power Supply Units (PSU) and a back-up battery. The unit controls battery charging and distributes power supply to all Voice Evacuation System (VES) equipment at max 60 A. When the system uses battery back-up, the power supplied is 3.2 kW (48 V). EST-PSM48 cooperates with the 4 x 12 V VRLA battery bank. It maintains the bank in charged condition, ensures temperature compensation of charging parameters and monitors serial resistance of the battery and its wiring as specified in Exhibit No. A2 to the EN54-4 Standard.
    V.A.T. included
    2,456.52 €
    AmbientSystem™ Power Supply Combiner [EST-PSC]
    AmbientSystem™ Power Supply Combiner
    Ref.: EST-PSC
    EST-PSC is a Power Supply Combiner from EST-PS48800.
    V.A.T. included
    822.84 €
    AmbientSystem™ PS48800 52VDC 15.4Amp Power Supply Unit [EST-PS48800]
    AmbientSystem™ PS48800 52VDC 15.4Amp Power Supply Unit
    Ref.: EST-PS48800
    EST-PS48800 is designed for assembling in a dedicated EST-PF4 Power Supply Unit Frame. The elements of the system are designed for assembling in a Rack 19'' IP30-type. Key Features: Power consumption: 885 W max. (3.85 A). AC power supply 230 VAC +10% -15%, 50/60Hz, 3.85 A Wire with IEC 60320 C13 3x0,75 mm2 coupling (supplied with the unit). Certification: EN54-4. Standards: EN12101-10.
    V.A.T. included
    999.76 €
    VRS122000EBA Power Supply for UTC™ IFS® Equipment [VRS122000EBA]
    VRS122000EBA Power Supply for UTC™ IFS® Equipment
    Ref.: VRS122000EBA
    It is designed to supply low voltage power for standalone IFS® modules. These power supplies accept universal mains input voltages from 100 – 253VAC, and provide a regulated 12VDC output with a maximum load of 1Amp. This unit is only suitable for installation as permanently connected equipment. The PSU is NOT SUITABLE for direct external installation, unless fitted within an appropriate IP rated enclosure. The PSU should be installed according to all relevant safety regulations applicable to the application. This unit must be fed from a mains power source having a separate (approved) disconnect device and fitted with a fuse or other over-current protection device rated at 3A maximum. Ensure that the disconnect device used has appropriate earth fault protection to the applicable standard.
    V.A.T. included
    52.60 €
    PS48VDC.38A-EU Power Supply for UTS ™ IFS® Equipment [PS48VDC.38A-EU]
    PS48VDC.38A-EU Power Supply for UTS ™ IFS® Equipment
    Ref.: PS48VDC.38A-EU
    Power supply for switches and media converters, input power 100-240VAC, output 48VDC / 0.38A (18W). Operating temperature 0º to + 50 ° C.
    V.A.T. included
    37.80 €
    UTC™ Aritech™ Smart Power Supply (24VDC-2Amp) [PM702C]
    UTC™ Aritech™ Smart Power Supply (24VDC-2Amp)
    Ref.: PM702C
    Monitored power supply unit at 24V. Mounted in a box and with a battery charger up to 17Ah. Requires 2 batteries BS131N reference (Not included). With CPR, EN54-4 and VDS Certificates. Overload protection. Fault relay output. Battery discharge protection. Operating temperature: -10ºC to 40ºC. Dimensions: 400 x 420 x 80mm. Amperage 2A + 0,8A for battery charging.
    V.A.T. included
    Consult
    PSU Power Box Component for 1X/ZP1/KFP-C Panel (4Amp) [2010-1-PS-40]
    PSU Power Box Component for 1X/ZP1/KFP-C Panel (4Amp)
    Ref.: 2010-1-PS-40
    Power supply module in grid box. Dimensions: 160 x 60 x 245 mm. Certifications: EN54-13, EN54-2, CPD, RoHS, WEEE.
    V.A.T. included
    167.57 €
    PSU Power Box Component for 1X/ZP1/KFP-C Panel (2.5Amp) [2010-1-PS-20]
    PSU Power Box Component for 1X/ZP1/KFP-C Panel (2.5Amp)
    Ref.: 2010-1-PS-20
    Power supply module in grid box. Dimensions: 160 x 60 x 245 mm. Certifications: EN54-13, EN54-2, CPD, RoHS, WEEE.
    V.A.T. included
    100.61 €
    KILSEN® Power Supply with Tamper Switch (24VDC-2Amp) [PM862]
    KILSEN® Power Supply with Tamper Switch (24VDC-2Amp)
    Ref.: PM862
    Power supply unit. Output: 24V. Mounted in a box and with a battery charger. Requires 2 batteries BS122N reference (Not included). Operating temperature: -10ºC to 40ºC. Dimensions: 330 x 275 x 80mm. Amperage 2.0A.
    V.A.T. included
    309.51 €
    KILSEN® Power Supply with Tamper Switch (24VDC-1Amp) [PM861]
    KILSEN® Power Supply with Tamper Switch (24VDC-1Amp)
    Ref.: PM861
    Power supply unit. Output: 24V. Mounted in a box and a battery charger. Requires 2 batteries BS122N reference(not included). Operating temperature: -10°C to 40°C. Dimensions: 330 x 275 x 80 mm. Amperage 1.0A.
    V.A.T. included
    232.16 €
    KILSEN® Power Supply with Tamper Switch (24VDC-5Amp) [PM865]
    KILSEN® Power Supply with Tamper Switch (24VDC-5Amp)
    Ref.: PM865
    Power supply unit. Output: 24V. Mounted in a box and with a battery charger. Requires 2 batteries BS122N reference (Not included). Operating temperature: -10ºC to 40ºC. Dimensions: 330 x 275 x 80mm. Amperage 5.0A.
    V.A.T. included
    521.45 €
    KILSEN® Power Supply with Tamper Switch (24VDC-3Amp) [PM863]
    KILSEN® Power Supply with Tamper Switch (24VDC-3Amp)
    Ref.: PM863
    Power supply unit. Output: 24V. Mounted in a box and with a battery charger. Requires 2 batteries BS122N reference (Not included). Operating temperature: -10ºC to 40ºC. Dimensions: 330 x 275 x 80mm. Amperage 3.0A.
    V.A.T. included
    388.58 €
    UTC™ GST® Intelligent PSU (24VDC 5A /w Display, Excl. Batteries) [PSU24-5]
    UTC™ GST® Intelligent PSU (24VDC 5A /w Display, Excl. Batteries)
    Ref.: PSU24-5
    24 volt DC intelligent PSU, 5 ampere version. Digital display showing output voltage and load current. Fully monitored with output protection. Mains supply 230VAC (+10/-15%), 50Hz. Max. Battery Size: 24VDC /12AH sealed lead battery. Dimension: 400 x 318 x 128 mm.
    V.A.T. included
    Consult
    UTC™ GST® Intelligent Addr. PSU (24VDC 10A) [PSU24-10A]
    UTC™ GST® Intelligent Addr. PSU (24VDC 10A)
    Ref.: PSU24-10A
    24 volt DC intelligent PSU, 10 ampere version. Digital display showing output voltage and load current. Fully monitored with output protection. Addressable intelligence for monitoring and reporting to main fire alarm panel. Mains supply 110 ~ 230VAC, 50/60Hz. Max. Battery Size: 24VDC /24AH sealed lead battery. Dimension: 520 x 350 x 156 mm.
    V.A.T. included
    Consult
    UTC™ GST® Intelligent PSU (24VDC 10A, Excl. Batteries) [PSU24-10]
    UTC™ GST® Intelligent PSU (24VDC 10A, Excl. Batteries)
    Ref.: PSU24-10
    24 volt DC intelligent PSU, 10 ampere version. Digital display showing output voltage and load current. Fully monitored with output protection. Mains supply 110 ~ 230VAC, 50/60Hz. Max. Battery Size: 24VDC /24AH sealed lead battery. Dimension: 520 x 350 x 156 mm.
    V.A.T. included
    Consult
    UTC™ Aritech™ Smart Power Supply (24VDC-5Amp) [PM705C]
    UTC™ Aritech™ Smart Power Supply (24VDC-5Amp)
    Ref.: PM705C
    Monitored power supply unit at 24V. Mounted in a box and with a battery charger up to 17Ah. Requires 2 batteries BS131N reference (Not included). With CPR, EN54-4 and VDS Certificates. Overload protection. Fault relay output. Battery discharge protection. Operating temperature: -10ºC to 40ºC. Dimensions: 400 x 420 x 80mm. Amperage 5A + 1,6A for battery charging.
    V.A.T. included
    1,089.35 €
    PULSAR® Homologated EN54C (Fires) Power Supply - 27,6V/5A/2x40Ah/LCD [EN54C-5A40LCD]
    PULSAR® Homologated EN54C (Fires) Power Supply - 27,6V/5A/2x40Ah/LCD
    Ref.: EN54C-5A40LCD
    EN54 / LCD series switched mode and regulated power supply (with a transformer), for approved fire protection systems. Dimensions: 420 x 407 x 178 mm, Input: 230 VAC (-15% / + 10%), Output: 3.2 A / 27.6 VDC - for continuous operation, 5.0 A / 27.6 VDC - for intermittent operation, with tamper tamper: 1xNC for protection against sabotage. Space for 12V SLA battery (2x40Ah), SCP, OLP, OVP, UVP protections. Technical outputs: EPS (AC grid failure) and ALARM (collective failure). technical inputs: EXTi (external fault). Complies with EN54-4, EN12101-10, CNBOP-PIB No 1438-CPR-0628 and CNBOP-PIB No. 3501/2019 for fire alarm systems. 142W.
    V.A.T. included
    752.14 €
    SYSAWAY© 2024 All rights reserved