Power supply: 200÷240VAC. Power supply output: 2A/27.6VDC. Compliant with standards: (1) Construction compliant with EN50131, GRADE 1 and 2. (2) Access control norm EN60839-11:2013, Grade 1 and 2. Battery charging current: 0.5A/1A. Battery: 2 x 7Ah. Efficiency: 89%. Dimensions: 230 x 300 x 82 [+/-2 mm], distance from floor: 8 mm. Protections: SCP, OLP, OVP, UVP, tamper – opening of enclosure. Technical outputs relay type: (1) EPS – AC power failure, (2) APS – battery failure. LED optical indication. Material: sheet metal DC01, 0.7mm, RAL9003 (white), metallic. IP20.

Power supply: 200÷240VAC. Power supply output: 3A/27.6VDC. Compliant with standards: (1) Construction compliant with EN50131, GRADE 1 and 2. (2) Access control norm EN60839-11:2013, Grade 1 and 2. Battery charging current: 0.5A/1A. Battery: 2 x 7Ah / 2 x 17Ah. Efficiency: 89%. Dimensions: 330 x 380 x 173 [+/-2 mm], distance from floor: 14 mm. Protections: SCP, OLP, OVP, UVP, tamper – opening of enclosure. Technical outputs relay type: (1) EPS – AC power failure, (2) APS – battery failure. LED optical indication. Material: sheet metal DC01, 0.7mm, RAL9003 (white), metallic. IP20.

Power supply: 200÷240VAC. Power supply output: 3A/27.6VDC. Compliant with standards: (1) Construction compliant with EN50131, GRADE 1 and 2. (2) Access control norm EN60839-11:2013, Grade 1 and 2. Battery charging current: 0.5A/1A. Battery: 2 x 7Ah. Efficiency: 89%. Dimensions: 300 x 300 x 105 [+/-2 mm], distance from floor: 8 mm. Protections: SCP, OLP, OVP, UVP, tamper – opening of enclosure. Technical outputs relay type: (1) EPS – AC power failure, (2) APS – battery failure. LED optical indication. Material: sheet metal DC01, 0.7mm, RAL9003 (white), metallic. IP20.

Power supply: 200÷240VAC. Power supply output: 3A/27.6VDC. Compliant with standards: (1) Construction compliant with EN50131, GRADE 1 and 2. (2) Access control norm EN60839-11:2013, Grade 1 and 2. Battery charging current: 1A/2A. Battery: 2 x 7Ah / 2 x 17Ah. Efficiency: 89%. Dimensions: 330 x 380 x 173 [+/-2 mm], distance from floor: 14 mm. Protections: SCP, OLP, OVP, UVP, tamper – opening of enclosure. Technical outputs relay type: (1) EPS – AC power failure, (2) APS – battery failure. LED optical indication. Material: sheet metal DC01, 0.7mm, RAL9003 (white), metallic. IP20.

Power supply: 200÷240VAC. Power supply output: 4A/27.6VDC. Compliant with standards: (1) Construction compliant with EN50131, GRADE 1 and 2. (2) Access control norm EN60839-11:2013, Grade 1 and 2. Battery charging current: 1A/2A. Battery: 2 x 7Ah / 2 x 17Ah / 2 x 24Ah / 2 x 40Ah. Efficiency: 89%. Dimensions: 460 x 390 x 173 [+/-2 mm], distance from floor: 14 mm. Protections: SCP, OLP, OVP, UVP, tamper – opening of enclosure. Technical outputs relay type: (1) EPS – AC power failure, (2) APS – battery failure. LED optical indication. Material: sheet metal DC01, 0.7mm, RAL9003 (white), metallic. IP20.

Hermetic junction box with opaque cap and stuffing box (2 x M12 + 1 x M16). Surface installation. Beige color RAL9003. Opaque cover ABS plastic materials halogen-free. With internal plate to hold devices such as power supplies (ideal for access control, intrusion and CCTV installations), with 4 fixing screws. 4 external locking screws.

Hermetic junction box with opaque cap. Surface installation. Beige color RAL9003. Opaque cover ABS plastic materials halogen-free. Ideal for access control, intrusion and CCTV installations, with 6 external locking screws.

Hermetic junction box with opaque cap and stuffing box (2 x M12 + 1 x M16). Surface installation. Beige color RAL9003. Opaque cover ABS plastic materials halogen-free. With internal plate to hold devices such as power supplies (ideal for access control, intrusion and CCTV installations), with 4 fixing screws. 6 external locking screws.

Hermetic junction box with opaque cap. Surface installation. Beige color RAL9003. Opaque cover ABS plastic materials halogen-free. Ideal for access control, intrusion and CCTV installations, with 4 external locking screws.

Switch-mode power supply for CCTV IP67. Uin=100-240VAC 50/60Hz. Size: 58 x 58 x 28 mm, IMAX=1.5A, I=1A, SCP (short circuit protection), OLP (overload protection).

Switch-mode power supply for CCTV IP67. Uin=100-240VAC 50/60Hz. Size: 50 x 48 x 25 mm, IMAX=1A, I=0.7A, SCP (short circuit protection), OLP (overload protection).

Switch-mode power supply for CCTV IP67. Uin=100-240VAC 50/60Hz. Size: 50 x 48 x 25 mm, IMAX=0.8A, I=0.56A, SCP (short circuit protection), OLP (overload protection).

Switch-mode power supply for CCTV IP67. Uin=90-264VAC 50/60Hz, Uout=12VDC. Size: 69 x 44 x 29 mm. IMAX=1.5A, I=1.05A. SCP (short circuit protection), OLP (overload protection).

Switch-mode power supply for CCTV IP67. Uin=90-264VAC 50/60Hz, Uout=12VDC. Size: 86 x 50 x 34 mm. IMAX=2A, I=1.4A. SCP (short circuit protection), OLP (overload protection).

Switch-mode power supply for CCTV IP67. Uin=90-264VAC 50/60Hz, Uout=12VDC. Size: 135 x 50 x 33 mm. IMAX =3A, I=2.1A. SCP (short circuit protection), OLP (overload protection).

Switch-mode power supply for CCTV IP67. Uin=90-264VAC 50/60Hz, Uout=12VDC. Size: 150 x 56 x 34 mm. IMAX =5A, I=3.5A. SCP (short circuit protection), OLP (overload protection).

Fuse module, a power distribution module. The LB1P/1x3.15A/1.5/FTA/230V fuse module is designed to protect the power supply circuits requiring a voltage of 230V AC. It is fitted with the one input for power supply and one output is equipped with short circuit protection (SCP), melting fuse (T 3.15Amp). The module is adapted for connection of cables with a maximum cross section of 1,5mm². The module board is mounted on a plastic base plate, which can be mounted to a flat substrate by means of two screws ø3mm or integrated adhesive tape. supply voltage range: 230V DC. Output voltage: equal to supply voltage. Power inputs: 1x screw connection 0.51÷1.63 (AWG 24-14) 0.2 ÷ 1.5mm². Number of outputs: 1x screw connection 0.51÷1.63 (AWG 24-14) 0.2 ÷ 1.5mm². Operating temperature: -10°C..50°C. Size: 60 x 43 x 40 mm.

Fuse module, a power distribution module. The LB2/2x2Amp/2.5/FTA fuse module is designed for power distribution in low-voltage systems requiring voltage of 10V÷30V DC or 10V÷24V AC (e.g. buffer power supply, transformer etc.). It is fitted with the IN input for power supply and 2 independent power paths protected with 2A fuses. Fuse activation is indicated by switching off the appropriate LED: L1 for AUX1, L2 for AUX2 etc. Additionally, each output is protected with a varistor protecting the power supply and receivers against surges in the supply system. The module is adapted for connection of wires with a maximum crosssection of 2.5mm². Protections against: a short circut SCP, an overload OLP, a surge. Supply voltage range: 10-30VDC / 10-24VAC. Output voltage: Uaux = Uin ( equal to supply voltage ). Power consumption: 3mA-20mA 10-30V DC. Power inputs: 1 (IN terminals) – max. 2.5mm² cable. Number of outputs: 2 (AUX terminals) – max. 2.5mm² cable. Fuses: 2x2Amp - TOCPI. Operating temperature: -10°C..50°C. Dimensions: 60 x 43 x 26 mm.

Fuse module, a power distribution module. The module enables the power supply section 4 independent channels. Short circuit, sabotage or other attempt to damage the terminal does not affect the operation of other devices connected to the same power source. The correct work function is indicated by LED. Protections against: a short circut SCP, an overload OLP, a surge. The module will check the alarm installations, CCTV systems. An additional advantage is that by using the divider can reduce and arrange the amount of power cables in the installation. The module board is mounted on a plastic base plate, which can be mounted to a flat substrate by means of two screws ø3mm or integrated adhesive tape. Supply voltage range: 10-30V DC. Output voltage: Uout = Uin. Power consumption: 5mA - 60mA. Power inputs: 1x the DC 5.5/2.1, 1x screw terminals. Number of outputs: 4x screw terminals. Operating temperature: -10°C..50°C. Size: 80 x 43 x 21 mm. Protection type: F0.5Amp - fuse.

Fuse module, a power distribution module. The module enables the power supply section 4 independent channels. Short circuit, sabotage or other attempt to damage the terminal does not affect the operation of other devices connected to the same power source. The correct work function is indicated by LED. Protections against: a short circut SCP, an overload OLP, a surge. The module will check the alarm installations, CCTV systems. An additional advantage is that by using the divider can reduce and arrange the amount of power cables in the installation. The module board is mounted on a plastic base plate, which can be mounted to a flat substrate by means of two screws ø3mm or integrated adhesive tape. Supply voltage range: 10-30V DC. Output voltage: Uout = Uin. Power consumption: 5mA - 30mA. Power inputs: 1x the DC 5.5/2.1, 1x screw terminals. Number of outputs: 4x screw terminals. Operating temperature: -10°C..50° C. Size: 80 x 43 x 21 mm. Protection type: PTC 1.0Amp - polymer fuse.

Fuse module, a power distribution module. The LB4/4x0.5A/2.5/AW/R fuse module is designed for power distribution in low-voltage systems requiring voltage of 10V÷30V DC or 10V÷24V AC (e.g. buffer power supply, transformer etc.). It is fitted with the IN input for power supply and 4 independently protected AUX1÷AUX4 power supply outputs. Each AUX output is equipped with short circuit protection (SCP): melting fuse F 0.5A or PTC 0.5A polymer fuse (the possibility of using 1A fuses, not supplied) as well as with overvoltage protection - varistors. Output state is indicated by 4 L1 ÷ L4 LEDs. Fuse failure is indicated by turning off the appropriate LED: L1 for AUX1, L2 for AUX2 etc. Additionally, in the case of failure, the FPS output (Hi-Z state) and the Lfps LED are switched on. The FPS output can be used for remote control of a module e.g. external optical indication. The module is adapted for connection of cables with a maximum cross section of 2.5mm². Protections against: a short circut SCP, an overload OLP, a surge. The module board is mounted on a plastic base plate, which can be mounted to a flat substrate by means of two screws ø3mm or integrated adhesive tape. supply voltage range: 10-30VDC / 10-24VAC. Output voltage: Uaux = Uin ( equal to supply voltage ). Power consumption: (1) 15mA-42mA 10-30V DC, (2) 37mA-42mA 10-24V AC. Power inputs: 1 (IN terminals) – max. 2.5mm² cable. Number of outputs: 4 (AUX terminals) – max. 2.5mm² cable. Fuse: 4x F 0.5Amp fuse or PTC 0.5Amp (the possibility of using 1Amp fuses, not supplied). Operating temperature: -10°C..50°C. Dimensions: 125 x 43 x 32 mm.

Fuse module, a power distribution module. The LB4/4x2A/2.5/FTA fuse module is designed for power distribution in low-voltage systems requiring voltage of 10V÷30V DC. It is fitted with the IN input for power supply and 4 AUX1÷AUX4 power supply outputs independently protected with 2A fuses. Fuse activation is indicated by switching off the appropriate LED: L1 for AUX1, L2 for AUX2 etc. Additionally, each output is protected with a varistor protecting the power supply and receivers against surges in the supply system. The module is adapted for connection of wires with a maximum cross-section of 2.5mm². Protections against: a short circut SCP, an overload OLP, a surge. he module board is mounted on a plastic base plate, which can be mounted to a flat substrate by means of two screws ø3mm or integrated adhesive tape. Supply voltage range: 10-30VDC. Output voltage: Uaux = Uin ( equal to supply voltage ). Power consumption: 5mA-30mA 10-30V DC. Power inputs: 1 (IN terminals) – max. 2.5mm² cable. Number of outputs: 4 (AUX terminals) – max. 2.5mm² cable. Fuse: 4x2Amp TOPIK. Operating temperature: -10°C..50°C. Dimensions: 80 x 43 x 30 mm.

Fuse module, a power distribution module. The LB4P/4x1.5A/FTA fuse module is designed for power distribution in low-voltage systems requiring voltage of 10V÷30V DC or 10V÷24V AC (e.g. buffer power supply, transformer etc.). It has 4 independent, galvanically isolated power supply circuits protected with 1,5A fuses. Fuse activation is indicated by switching off the appropriate LED: L1 for AUX1, L2 for AUX2 etc. Additionally, each output is protected with a varistor protecting the power supply and receivers against surges in the supply system. The module is adapted for connection of wires with a maximum cross-section of 1mm². Protections against: a short circut SCP, an overload OLP, a surge. The module board is mounted on a plastic base plate, which can be mounted to a flat substrate by means of two screws ø3mm or integrated adhesive tape. Supply voltage range: 10-30VDC / 10-24VAC. Output voltage: Uaux = Uin ( equal to supply voltage ). Power consumption: 5mA - 30mA. Power inputs: 4 (IN terminals) – max. 1mm² cable. Number of outputs: 4 (AUX terminals) – max. 1mm² cable. Fuse: 4x1.5Amp – TOPIK. Operating temperature: -10°C..50°C. Dimensions: 100 x 43 x 20 mm.

Fuse module, a power distribution module. The LB5/5x0.5A/2.5/AW fuse module is designed for power distribution in low-voltage systems requiring voltage of 10V÷30V DC or 10V÷24V AC (e.g. buffer power supply, transformer etc.). It is fitted with the IN input for power supply and 5 independently protected AUX1÷AUX5 power supply outputs. Each AUX output is equipped with short circuit protection (SCP): melting fuse F 0.5A or PTC 0.5A polymer fuse (the possibility of using 1A fuses, not supplied) as well as with overvoltage protection - varistors. Output state is indicated by 5 L1 ÷ L5 LEDs. Fuse failure is indicated by turning off the appropriate LED: L1 for AUX1, L2 for AUX2 etc. Additionally, in the case of failure, the FPS output (Hi-Z state) and the Lfps LED are switched on. The FPS output can be used for remote control of a module e.g. external optical indication. The module is adapted for connection of cables with a maximum cross section of 2.5mm². Protections against: a short circut SCP, an overload OLP, a surge. The module board is mounted on a plastic base plate, which can be mounted to a flat substrate by means of two screws ø3mm or integrated adhesive tape. supply voltage range: 10-30VDC / 10-24VAC. Output voltage: Uaux = Uin ( equal to supply voltage ). Power consumption: (1) 6mA-41mA 10-30V DC, (2) 10mA-32mA 10-24V AC. Power inputs: 1 (IN terminals) – max. 2.5mm² cable. Number of outputs: 5 (AUX terminals) – max. 2.5mm² cable. Fuse: 5x F 0.5Amp fuse or PTC 0.5Amp (the possibility of using 1Amp fuses, not supplied). Operating temperature: -10°C..50°C. Dimensions: 150 x 43 x 30 mm.