English
Español
  • Search
    • +34 902930427

    0.00 €

    Products 802
    PULSAR® PoE Distribution Module 4 / 4x1A / 1.5 [AWZ602]
    PULSAR® PoE Distribution Module 4 / 4x1A / 1.5
    Ref.: AWZ602
    Power distribution module for IP cameras (PoE). Size: 105 x 43 x 24 mm, Uin=20÷56 VDC (+/-2%), UPoE=Uin (equal to supply voltage), 4x1.0A. Number of power inputs: 2 - DC 5.5/2.1 socket or screw terminal – max. cable length 1.5mm2. Number of PoE outputs: 4 – RJ45. The module supports both 10Mbps and 100Mbps networks).
    V.A.T. included
    Consult
    PULSAR® PoE Distribution Module 4 / 4x1A / 1.5 [AWZ613]
    PULSAR® PoE Distribution Module 4 / 4x1A / 1.5
    Ref.: AWZ613
    Power distribution module for IP cameras (PoE). Size: 75 x 73 x 33 mm, Uin=20÷56 VDC (+/-2%), UPoE=Uin (equal to supply voltage), 4x1.0A. Number of power inputs: 2 - DC 5.5/2.1 socket or screw terminal – max. cable length 1.5mm2. Number of PoE outputs: 4 – RJ45. The module supports both 10Mbps and 100Mbps networks.
    V.A.T. included
    Consult
    PULSAR® Pole Mounting Kit OZB1 [ OZB1]
    PULSAR® Pole Mounting Kit OZB1
    Ref.: OZB1
    Pole mount bracket is designed for mounting hermetic enclosures on poles, masts, structural elements, etc. in a way that does not damage the structure of the bearing element. Mounting plate dimensions: L=152 W=112 [+/- 2mm].
    V.A.T. included
    Consult
    PULSAR® Pole Mounting Kit OZB2 [OZB2]
    PULSAR® Pole Mounting Kit OZB2
    Ref.: OZB2
    Pole mount bracket is designed for mounting hermetic enclosures on poles, masts, structural elements, etc. in a way that does not damage the structure of the bearing element. Mounting plate dimensions: L=194 W=144 [+/- 2mm].
    V.A.T. included
    34.30 €
    PULSAR® PS 12V/10Amp Enclosed Switch Mode PSU [PS-15012100]
    PULSAR® PS 12V/10Amp Enclosed Switch Mode PSU
    Ref.: PS-15012100
    The power supply unit is intended for 230V AC mains supply to alarm system devices, which require 12V DC voltage and current efficiency of I=10A. The design enables simple changing of the output voltage, within the range of 12V÷15V DC, using a potentiometer. The power supply unit is protected against a short circuit, an overload, a surge or over voltage. Power supply: 176÷264VAC/ 50Hz. Power supply output: 10A/12VDC. Voltage adjustment range: 12V÷15V. Efficiency: 83%. Protections: SCP, OLP, OVP. Dimensions: L=199, W=110, H=50 [+/- 2mm]. For mounting on a DIN rail, required bracket: PSDIN2.
    V.A.T. included
    71.66 €
    PULSAR® PS 12V/14Amp Enclosed Switch Mode PSU [PS-20012140]
    PULSAR® PS 12V/14Amp Enclosed Switch Mode PSU
    Ref.: PS-20012140
    The power supply unit is intended for the feeding of alarm system equipments, which require 12V DC supply voltage and current load I=14A. The design enables simple changing of the output voltage, within the range of 12V÷15V DC, using a potentiometer. The power supply unit is protected against short-circuit, overload and overvoltage. Power supply: 176÷264VAC/ 50Hz. Power supply output: 14A/12VDC. Voltage adjustment range: 12V÷15V. Efficiency: 85%. Protections: SCP, OLP, OVP. Dimensions: L=226, W=115, H=50 [+/- 2mm]. For mounting on a DIN rail, required bracket: PSDIN2.
    V.A.T. included
    105.71 €
    PULSAR® PS 12V/1Amp Enclosed Switch Mode PSU [PS-151210]
    PULSAR® PS 12V/1Amp Enclosed Switch Mode PSU
    Ref.: PS-151210
    The power supply unit is intended for the feeding of alarm system equipments, which require 12V DC supply voltage and current load I=1A. The design enables simple changing of the output voltage, within the range of 12V÷15V DC, using a potentiometer. The power supply unit is protected against short-circuit, overload and overvoltage. Power supply: 85÷264VAC. Power supply output: 1A/12VDC. Voltage adjustment range: 12V÷15V. Efficiency: 74%. Protections: SCP, OLP, OVP. Dimensions: L=85, W=60, H=37 [+/- 2mm]. For mounting on a DIN rail, required bracket: PSDIN1
    V.A.T. included
    Consult
    PULSAR® PS 12V/2Amp Enclosed Switch Mode PSU [PS-251220]
    PULSAR® PS 12V/2Amp Enclosed Switch Mode PSU
    Ref.: PS-251220
    The power supply unit is intended for the feeding of alarm system equipments, which require 12V DC supply voltage and current load I=2A. The design enables simple changing of the output voltage, within the range of 12V÷15V DC, using a potentiometer. The power supply unit is protected against short-circuit, overload and overvoltage. Power supply: 85÷264VAC / 120÷370VDC. Power supply output: 2A/12VDC. Voltage adjustment range: 12V÷15V. Efficiency: 74%. Protections: SCP, OLP, OVP. Dimensions: L=110, W=78, H=36 [+/- 2mm]. For mounting on a DIN rail, required bracket: PSDIN1.
    V.A.T. included
    37.61 €
    PULSAR® PS 12V/3Amp Enclosed Switch Mode PSU [PS-12V3A]
    PULSAR® PS 12V/3Amp Enclosed Switch Mode PSU
    Ref.: PS-12V3A
    The power supply unit is intended for supplying power to alarm system devices requiring 12 V DC supply voltage and current load of I=3 A. The design enables simple change of the output voltage, within the range of 12 - 15 V DC, by means of a potentiometer. The power supply unit is protected against short-circuit, overload and overvoltage. Power supply: ~ 200 – 240 V; 0,5 A; 50/60 Hz. Power supply output: 3A/12VDC. Voltage adjustment range: 12V-15V DC. Efficiency: 87%. Protections: SCP, OLP, OVP. Dimensions: L=110, W=78, H=36 [+/- 2mm].
    V.A.T. included
    48.02 €
    PULSAR® PS 12V/3Amp Enclosed Switch Mode PSU [PS-401230]
    PULSAR® PS 12V/3Amp Enclosed Switch Mode PSU
    Ref.: PS-401230
    The power supply unit is intended for the feeding of alarm system equipments, which require 12V DC supply voltage and current load I=3A. The design enables simple changing of the output voltage, within the range of 12V÷15V DC, using a potentiometer. The power supply unit is protected against short-circuit, overload and overvoltage. Power supply: 85÷264VAC / 120÷370VDC. Power supply output: 3A/12VDC. Voltage adjustment range: 12V÷15V. Efficiency: 75%. Protections: SCP, OLP, OVP. Dimensions: L=129, W=98, H=38 [+/- 2mm]. For mounting on a DIN rail, required bracket: PSDIN1.
    V.A.T. included
    Consult
    PULSAR® PS 12V/5Amp Enclosed Switch Mode PSU [PS-12V5A]
    PULSAR® PS 12V/5Amp Enclosed Switch Mode PSU
    Ref.: PS-12V5A
    The power supply unit is intended for supplying power to alarm system devices requiring 12 V DC supply voltage and current load of I=5 A. The design enables simple change of the output voltage, within the range of 12 V - 15 V DC, by means of a potentiometer. The power supply unit is protected against short-circuit, overload and overvoltage. Power supply: ~ 200 – 240 V; 0,5 A; 50/60 Hz. Power supply output: 5A/12VDC. Voltage adjustment range: 12V÷15V. Efficiency: 87%. Protections: SCP, OLP, OVP. Dimensions: L=129, W=98, H=40 [+/- 2mm].
    V.A.T. included
    50.82 €
    PULSAR® PS 12V/5Amp Enclosed Switch Mode PSU [PS-601250]
    PULSAR® PS 12V/5Amp Enclosed Switch Mode PSU
    Ref.: PS-601250
    The power supply unit is intended for the feeding of alarm system equipments, which require 12V DC supply voltage and current load I=5A. The design enables simple changing of the output voltage, within the range of 12V÷15V DC, using a potentiometer. The power supply unit is protected against short-circuit, overload and overvoltage. Power supply: 85÷264VAC / 120÷370VDC. Power supply output: 5A/12VDC. Voltage adjustment range: 12V÷15V. Efficiency: 80%. Protections: SCP, OLP, OVP. Dimensions: L=159, W=97, H=38 [+/- 2mm]. For mounting on a DIN rail, required bracket: PSDIN1.
    V.A.T. included
    Consult
    PULSAR® PS 12V/7Amp Enclosed Switch Mode PSU [PS-1001270]
    PULSAR® PS 12V/7Amp Enclosed Switch Mode PSU
    Ref.: PS-1001270
    The power supply unit is intended for supplying power to alarm system devices requiring 12V DC supply voltage and current load of I=7A. The design enables simple change of the output voltage, within the range of 12V÷15V DC, by means of a potentiometer. The power supply unit is protected against short-circuit, overload and overvoltage. Power supply: 176÷264VAC, 50Hz. Power supply output: 7A/12VDC. Voltage adjustment range: 12V÷15V. Efficiency: 83%. Protections: SCP, OLP, OVP. Dimensions: L=199, W=98, H=38 [+/- 2mm]. For mounting on a DIN rail, required bracket: PSDIN2.
    V.A.T. included
    Consult
    PULSAR® PS 48V/1.2Amp Enclosed Switch Mode PSU [PS-604812]
    PULSAR® PS 48V/1.2Amp Enclosed Switch Mode PSU
    Ref.: PS-604812
    The power supply unit is intended for the feeding of alarm system equipments, which require 24V DC supply voltage and current load I=1,2A. The design enables simple changing of the output voltage, within the range of 48V÷53V DC, using a potentiometer. The power supply unit is protected against short-circuit, overload and overvoltage. Power supply: 85÷264VAC / 120÷370VDC. Power supply output: 1,2A/48VDC. Voltage adjustment range: 48V÷53V. Efficiency: 81%. Protections: SCP, OLP, OVP. Dimensions: L=159, W=97, H=38 [+/- 2mm]. For mounting on a DIN rail, required bracket PSDIN1.
    V.A.T. included
    19.82 €
    PULSAR® PS 48V/3Amp Enclosed Switch Mode PSU [PS-1504830]
    PULSAR® PS 48V/3Amp Enclosed Switch Mode PSU
    Ref.: PS-1504830
    The power supply unit is intended for the feeding of alarm system equipments, which require 48V DC supply voltage and current load I=3A. The design enables simple changing of the output voltage, within the range of 48V÷53V DC, using a potentiometer. The power supply units is protected against short-circuit, overload, surge protection and overvoltage. Power supply: 176÷264VAC/50Hz. Power supply output: 3A/48VDC. Voltage adjustment range: 48V÷53V. Efficiency: 85%. Protections: SCP, OLP, OVP. Dimensions: L=199, W=110, H=50 [+/- 2mm]. For mounting on a DIN rail, required bracket PSDIN2.
    V.A.T. included
    26.68 €
    PULSAR® PSB 13,8V / 10A Enclosed Switch Mode PSU [PSB-12V10A]
    PULSAR® PSB 13,8V / 10A Enclosed Switch Mode PSU
    Ref.: PSB-12V10A
    Switch mode buffer power supply units PSB are intended for continuous power supply to devices that require stabilised voltage of 12, 24 or 48 V DC (±15%) . Size: 199 x 110 x 50 mm. Uin=~200 – 240 V, Uout=13,8VDC. ?I=10A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection).
    V.A.T. included
    118.66 €
    PULSAR® PSB 54V / 3A Enclosed Switch Mode PSU [PSB-48V3A]
    PULSAR® PSB 54V / 3A Enclosed Switch Mode PSU
    Ref.: PSB-48V3A
    Switch mode buffer power supply units PSB are intended for continuous power supply to devices that require stabilised voltage of 12, 24 or 48 V DC (±15%) . Size: 199 x 110 x 50 mm. Uin=~200 – 240 V, Uout=54VDC. ?I=3A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection).
    V.A.T. included
    118.66 €
    PULSAR® PSBS 13,8V/2Amp/7Ah/OC Buffer Switch Mode PSU with Technical Outputs [PSBS2012B]
    PULSAR® PSBS 13,8V/2Amp/7Ah/OC Buffer Switch Mode PSU with Technical Outputs
    Ref.: PSBS2012B
    A buffer PSU is designed for uninterrupted supply of devices requiring stabilized voltage of 12V DC (+/-15%). The PSU supplies voltage of U=13,8V DC. In case of mains power loss, the unit will instantly switch to battery operation. The PSU is enclosed in a metal casing (color RAL9003) with battery housing for 7Ah/12V batteries. The enclosure is fitted with a micro switch indicating door opening (front cover) and the detachment from the wall. Power supply: 230VAC/50Hz. Power supply output: 2A/13,8VDC. Battery charging current: 0,2A/0,5A. Fitting battery: 7Ah/12V. Efficiency: 71%. Protections: SCP, OLP, OVP, UVP, tamper (opening of the enclosure, detachment from the wall). Technical outputs OC type: EPS - 230V power failure AC, PSU - power supply failure, LoB – low battery voltage. Dimensions: W=230 H=230 D+D1=82+8 mm [+/- 2 mm]. Surface mounted enclosure, locking – bolted.
    V.A.T. included
    Consult
    PULSAR® PSBS 13,8V/3Amp/17Ah/OC Buffer Switch Mode PSU with Technical Outputs [PSBS3012C]
    PULSAR® PSBS 13,8V/3Amp/17Ah/OC Buffer Switch Mode PSU with Technical Outputs
    Ref.: PSBS3012C
    A buffer PSU is designed for uninterrupted supply of devices requiring stabilized voltage of 12V DC (+/-15%). The PSU supplies voltage of U=13,8V DC. In case of mains power loss, the unit will instantly switch to battery operation. The PSU is enclosed in a metal casing (color RAL9003) with battery housing for 17Ah/12V batteries. The enclosure is fitted with a micro switch indicating door opening (front cover) and the detachment from the wall. Power supply: 230VAC/50Hz. Power supply output: 3A/13,8VDC. Battery charging current: 0,5A/1A. Fitting battery: 17Ah/12V. Efficiency: 69%. Protections: SCP, OLP, OVP, UVP, tamper (opening of the enclosure, detachment from the wall). Technical outputs OC type: EPS - 230V power failure AC, PSU - power supply failure, LoB – low battery voltage. Dimensions: W=260 H=300 D+D1=92+8 mm [+/- 2 mm]. Surface mounted enclosure, locking – bolted.
    V.A.T. included
    Consult
    PULSAR® PSBS 13,8V/5Amp/17Ah/OC Buffer Switch Mode PSU with Technical Outputs [PSBS5012C]
    PULSAR® PSBS 13,8V/5Amp/17Ah/OC Buffer Switch Mode PSU with Technical Outputs
    Ref.: PSBS5012C
    A buffer PSU is designed for uninterrupted supply of devices requiring stabilized voltage of 12V DC (+/-15%). The PSU supplies voltage of U=13,8V DC. In case of mains power loss, the unit will instantly switch to battery operation. The PSU is enclosed in a metal casing (color RAL9003) with battery housing for 17Ah/12V batteries. The enclosure is fitted with a micro switch indicating door opening (front cover) and the detachment from the wall. Power supply: 230VAC/50Hz. Power supply output: 5A/13,8VDC. Battery charging current: 0,5A/1A/2A/3A. Fitting battery: 17Ah/12V. Efficiency: 76%. Protections: SCP, OLP, OVP, UVP, tamper (opening of the enclosure, detachment from the wall). Technical outputs OC type: EPS - 230V power failure AC, PSU - power supply failure, LoB – low battery voltage. Dimensions: W=330 H=350 D+D1=102+8 mm [+/- 2 mm]. Surface mounted enclosure, locking – bolted.
    V.A.T. included
    Consult
    PULSAR® PSBS 13,8V/5Amp/40Ah/OC Buffer Switch Mode PSU with Technical Outputs [PSBS5012D]
    PULSAR® PSBS 13,8V/5Amp/40Ah/OC Buffer Switch Mode PSU with Technical Outputs
    Ref.: PSBS5012D
    A buffer PSU is designed for uninterrupted supply of devices requiring stabilized voltage of 12V DC (+/-15%). The PSU supplies voltage of U=13,8V DC. In case of mains power loss, the unit will instantly switch to battery operation. The PSU is enclosed in a metal casing (color RAL9003) with battery housing for 40Ah/12V batteries. The enclosure is fitted with a micro switch indicating door opening (front cover) and the detachment from the wall. Power supply: 230VAC/50Hz. Power supply output: 5A/13,8VDC. Battery charging current: 0,5A/1A/2A/3A. Fitting battery: 40Ah/12V. Efficiency: 76%. Protections: SCP, OLP, OVP, UVP, tamper (opening of the enclosure, detachment from the wall). Technical outputs OC type: EPS - 230V power failure AC, PSU - power supply failure, LoB – low battery voltage. Dimensions: W=330 H=350 D+D1=172+8 mm [+/- 2 mm]. Surface mounted enclosure, locking – bolted.
    V.A.T. included
    Consult
    PULSAR® PSBS 27,6V/3Amp/2x17Ah/OC Buffer Switch Mode PSU with Technical Outputs [PSBS3024C]
    PULSAR® PSBS 27,6V/3Amp/2x17Ah/OC Buffer Switch Mode PSU with Technical Outputs
    Ref.: PSBS3024C
    A buffer PSU is designed for uninterrupted supply of devices requiring stabilized voltage of 24V DC (+/- 15%). The PSU supplies voltage of U=27,6V DC. In case of mains power loss, the unit will instantly switch to battery operation. The PSU is enclosed in a metal casing (color RAL9003) with battery housing for two 17Ah/12V batteries. The enclosure is fitted with a micro switch indicating door opening (front cover) and the detachment from the wall. Power supply: 230VAC/50Hz. Power supply output: 3A/27,6VDC. Battery charging current: 0,5A/1A. Fitting battery: 2x17Ah/12V. Efficiency: 84%. Protections: SCP, OLP, OVP, UVP, tamper (opening of the enclosure, detachment from the wall). Technical outputs OC type: EPS - 230V power failure AC, PSU - power supply failure, LoB – low battery voltage. Dimensions: W=400 H=350 D+D1=92+8 mm [+/- 2 mm]. Surface mounted enclosure, locking – bolted.
    V.A.T. included
    Consult
    PULSAR® PSBS 27,6V/5Amp/2x17Ah/OC Buffer Switch Mode PSU with Technical Outputs [PSBS5024C]
    PULSAR® PSBS 27,6V/5Amp/2x17Ah/OC Buffer Switch Mode PSU with Technical Outputs
    Ref.: PSBS5024C
    A buffer PSU is designed for uninterrupted supply of devices requiring stabilized voltage of 24V DC (+/- 15%). The PSU supplies voltage of U=27,6V DC. In case of mains power loss, the unit will instantly switch to battery operation. The PSU is enclosed in a metal casing (color RAL9003) with battery housing for two 17Ah/12V batteries. The enclosure is fitted with a micro switch indicating door opening (front cover) and the detachment from the wall. Power supply: 230VAC/50Hz. Power supply output: 5A/27,6VDC. Battery charging current: 0,5A/1A. Fitting battery: 2x17Ah/12V. Efficiency: 84%. Protections: SCP, OLP, OVP, UVP, tamper (opening of the enclosure, detachment from the wall). Technical outputs OC type: EPS - 230V power failure AC, PSU - power supply failure, LoB – low battery voltage. Dimensions: W=400 H=350 D+D1=92+8 mm [+/- 2 mm]. Surface mounted enclosure, locking – bolted.
    V.A.T. included
    Consult
    PULSAR® PSCLB 13,8V/1Amp Buffer Switch Mode PSU [PSCLB13810]
    PULSAR® PSCLB 13,8V/1Amp Buffer Switch Mode PSU
    Ref.: PSCLB13810
    The buffer power supply is designed for uninterrupted supply of devices requiring stabilized voltage of 12 V DC (+/-15%). The PSU supplies voltage of 13,8 V DC with current efficiency of I = 1 A + 0,3 A battery charging. In the case of mains power failure, the unit will instantly switch to battery power. The power supply unit is protected against shortcircuit, overload and overvoltage. During normal operation, the total current drawn by the device cannot exceed I=1 A. The maximum battery charging current is 0,3 A. The total current of the receivers + battery is max. 1,3 A. Power supply: 90÷264VAC/50Hz. Power supply output: 1A/13,8VDC. Battery charging current: 0,3Amp. Efficiency: 80%. Protections: SCP, OLP, UVP. IP67 over molded plastic enclosure. Plastic enclosure with mounting brackets. Dimensions: 135 x 50 x 33 mm.
    V.A.T. included
    Consult
    SYSAWAY© 2024 All rights reserved