Fuse module, a power distribution module. The module enables the power supply section 8 independent channels. Short circuit, sabotage or other attempt to damage the terminal does not affect the operation of other devices connected to the same power source. The correct work function is indicated by LED. Protections against: a short circut SCP, an overload OLP, a surge. The module will check the alarm installations, CCTV systems. An additional advantage is that by using the divider can reduce and arrange the amount of power cables in the installation. The module board is mounted on a plastic base plate, which can be mounted to a flat substrate by means of two screws ø3mm or integrated adhesive tape. Supply voltage range: 10-30V DC. Output voltage: Uout = Uin. Power consumption: 9mA - 60mA. Power inputs: 1x the DC 5.5/2.1, 1x screw terminals. Number of outputs: 8x screw terminals. Operating temperature: -10°C..50°C. Size: 124 x 43 x 21 mm. Protection type: F0.5Amp - fuse.

Fuse module, a power distribution module. The module enables the power supply section 8 independent channels. Short circuit, sabotage or other attempt to damage the terminal does not affect the operation of other devices connected to the same power source. The correct work function is indicated by LED. Protections against: a short circut SCP, an overload OLP, a surge. The module will check the alarm installations, CCTV systems. An additional advantage is that by using the divider can reduce and arrange the amount of power cables in the installation. The module board is mounted on a plastic base plate, which can be mounted to a flat substrate by means of two screws ø3mm or integrated adhesive tape. Supply voltage range: 10-30V DC. Output voltage: Uout = Uin. Power consumption: 5mA - 60mA. Power inputs: 1x the DC 5.5/2.1, 1x screw terminals. Number of outputs: 8x screw terminals. Operating temperature: -10°C..50°C. Size: 124 x 43 x 21 mm. Protection type: PTC 0.3Amp - polymer fuse.

Fuse module, a power distribution module. The module enables the power supply section 8 independent channels. Short circuit, sabotage or other attempt to damage the terminal does not affect the operation of other devices connected to the same power source. The correct work function is indicated by LED. Protections against: a short circut SCP, an overload OLP, a surge. The module will check the alarm installations, CCTV systems. An additional advantage is that by using the divider can reduce and arrange the amount of power cables in the installation. The module board is mounted on a plastic base plate, which can be mounted to a flat substrate by means of two screws ø3mm or integrated adhesive tape. Supply voltage range: 10-30V DC. Output voltage: Uout = Uin. Power consumption: 5mA - 60mA. Power inputs: 1x the DC 5.5/2.1, 1x screw terminals. Number of outputs: 8x screw terminals. Operating temperature: -10°C..50°C. Size: 124 x 43 x 21 mm. Protection type: PTC 0.5Amp - polymer fuse.

Fuse module, a power distribution module. The module enables the power supply section 8 independent channels. Short circuit, sabotage or other attempt to damage the terminal does not affect the operation of other devices connected to the same power source. The correct work function is indicated by LED. Protections against: a short circut SCP, an overload OLP, a surge. The module will check the alarm installations, CCTV systems. An additional advantage is that by using the divider can reduce and arrange the amount of power cables in the installation. The module board is mounted on a plastic base plate, which can be mounted to a flat substrate by means of two screws ø3mm or integrated adhesive tape. Supply voltage range: 10-30V DC. Output voltage: Uout = Uin. Power consumption: 5mA - 60mA. Power inputs: 1x the DC 5.5/2.1, 1x screw terminals. Number of outputs: 8x screw terminals. Operating temperature: -10°C..50°C. Size: 124 x 43 x 21 mm. Protection type: PTC 1.0Amp - polymer fuse.

Fuse module, a power distribution module. The LB8/8x1.5A/2.5/FTA fuse module is designed for power distribution in low-voltage systems requiring voltage of 10V÷30V DC or 10V÷24V AC (e.g. buffer power supply, transformer etc.). It is fitted with 2 power inputs and 8 independent power paths protected with 1.5A fuses. Fuse activation is indicated by switching off the appropriate LED: L1 for AUX1, L2 for AUX2 etc. Additionally, each output is protected with a varistor protecting the power supply and receivers against surges in the supply system. The module is adapted for connection of cables with a maximum cross-section of 2.5mm². Protections against: a short circut SCP, an overload OLP, a surge. The module board is mounted on a plastic base plate, which can be mounted to a flat substrate by means of two screws ø3mm or integrated adhesive tape. supply voltage range: 10-30VDC / 10-24VAC. Output voltage: Uaux = Uin ( equal to supply voltage ). Power consumption: 8mA-60mA 10-30V DC. Power inputs: 2 (IN terminals) – max. 2.5mm² cable. Number of outputs: 8 (AUX terminals) – max. 2.5mm² cable. Fuse: 8x1.5Amp - TOPIC. Operating temperature: -10°C..50°C. Dimensions: 144 x 43 x 26 mm.

Fuse module with enclosure. The LBC5 fuse module is designed for power distribution in CCTV systems requiring the voltage in the range 10V ÷ 30V DC. It is equipped with two power inputs: screw connection and DC jack 5.5/2.1 and five AUX1 ÷ AUX5 power outputs independently protected with 1A melting fuses. PTC fuse activation is indicated by switching off the corresponding LED of the module: L1 for AUX1, L2 for AUX2 etc. Additionally, the module's input is protected by a varistor, protecting the power supply against surges in the power supply system. Protections against: a short circut SCP, an overload OLP, a surge. Mounting options: wall mounting – mounting screws x 2, mounting on a mast - hose clamp. voltage range: 10-30VDC. Mounting options: wall mounting – mounting screws x 2, mounting on a mast - hose clamp. Power consumption: 5mA - 50mA. Power inputs 2: DC jack 5.5/2.1 or screw connection number of outputs: 5 (AUX terminals). Fuse: 5x1A – TOPIK. Operating temperature: -10°C..40°C. Dimensions: 150 x 94 x 42 mm.

Fuse module with enclosure. The LBC5 fuse module is designed for power distribution in CCTV systems requiring the voltage in the range 10V- 30V DC. It is equipped with two power inputs: screw connection and DC jack 5.5/2.1 and five AUX1 ÷ AUX5 power outputs independently protected with 1A polymer fuses. The module is equipped with J1÷J5 jumpers disconnecting the power supply at the AUX1 ÷ AUX5 outputs ("+" terminal) PTC fuse activation is indicated by switching off the corresponding LED of the module: L1 for AUX1, L2 for AUX2 etc. Additionally, the module's input is protected by a varistor, protecting the power supply against surges in the power supply system. Protections against: a short circut SCP, an overload OLP, a surge. Mounting options: wall mounting – mounting screws x 2, mounting on a mast - hose clamp. Voltage range: 10-30VDC. Mounting options: wall mounting – mounting screws x 2, mounting on a mast - hose clamp. Power consumption: 5mA - 50mA. Power inputs 2: DC jack 5.5/2.1 or screw connection. Number of outputs: 5 (AUX terminals). Fuse: 5x1Amp – PTC. Operating temperature: -10°C..40°C. Dimensions: 150 x 94 x 42 mm.

Fuse module, a power distribution module. The module enables the power supply section 8 independent channels. Short circuit, sabotage or other attempt to damage the terminal does not affect the operation of other devices connected to the same power source. The correct work function is indicated by LED. Protections against: a short circut SCP, an overload OLP, a surge. The module will check the alarm installations, CCTV systems. An additional advantage is that by using the divider can reduce and arrange the amount of power cables in the installation. The module board was placed in a sturdy plastic housing. The flap edge sealing gasket is placed by the intrusion into the water. The housing fastened to the base by means of screws (two holes Ø4mm) and the hose clamp to the mast. Supply voltage range: 10-30V DC. Output voltage: Uout = Uin. Power consumption: 8mA - 70mA. Power inputs: 1x the DC 5.5/2.1, 1x screw terminals. Number of outputs: 8x screw terminals. Operating temperature: -10°C..40°C. Size: 126 x 78+16 x 42 mm.

Fuse module, a power distribution module. The module enables the power supply section 8 independent channels. Short circuit, sabotage or other attempt to damage the terminal does not affect the operation of other devices connected to the same power source. The correct work function is indicated by LED. Protections against: a short circut SCP, an overload OLP, a surge. The module will check the alarm installations, CCTV systems. An additional advantage is that by using the divider can reduce and arrange the amount of power cables in the installation. The module board was placed in a sturdy plastic housing. The flap edge sealing gasket is placed by the intrusion into the water. The housing fastened to the base by means of screws (two holes Ø4mm) and the hose clamp to the mast. Supply voltage range: 10-30V DC. Output voltage: Uout = Uin. Power consumption: 8mA - 70mA. Power inputs: 1x the DC 5.5/2.1, 1x screw terminals. Number of outputs: 8x screw terminals. Operating temperature: -10°C..40°C. Size: 126 x 78+16 x 42 mm.

Cable gland with NBR soft rubber sealing ring with IP68 protection rating (10 bar) according to EN 60529, M12 for 1.25mm diameter cables. Manufactured in self-extinguishing polyamide 6 in gray color RAL 7035. Industrial and special applications. Unit price (minimum order: 50 units).

Cable gland with NBR soft rubber sealing ring with IP68 protection rating (10 bar) according to EN 60529, M16 for 1.5 mm diameter cables. Manufactured in self-extinguishing polyamide 6 in gray color RAL 7035. Industrial and special applications. Unit price (minimum order: 50 units).

Cable gland with NBR soft rubber sealing ring with IP68 protection rating (10 bar) according to EN 60529, M20 for 1.55mm diameter cables. Manufactured in self-extinguishing polyamide 6 in gray color RAL 7035. Industrial and special applications. Unit price (minimum order: 50 units).

The MSC1512 PSU module is intended for supplying devices that require voltage of 12V or 24V DC. The module is designed as a supplying component in CCTV systems, KD access control, SSWiN alarm systems, etc. It is intended to be wall-mounted or fixed inside a device (e.g. camera’s enclosure). When supplied with the maximum AC power, the module enables supplying 12V DC cameras for a longer distance (approx. 2x) than in case of 13,8V DC supply (with the same cross-section and resistance of the wires). The module does not hale galvanic insolation between input/output (AC-AUX). For correct operation of the module, the appropriate input voltage and current efficiency of the power source shall be provided.

The over voltage protection module is intended for protecting systems powered with 12V DC against being supplied with too high supply power (e.g. as a result of damaged stabilising system of a PSU). When the maximum accessible input voltage is detected, the output is cut off protecting the receivers from damaging. Activation of the system is indicated by the red LED – L1. Protections against overvoltage OVP. The module board is mounted on a plastic base plate, which can be mounted to a flat substrate by means of two screws or integrated adhesive tape. voltage: 9V-40V DC. Output voltage: 9V ÷ 14,1V DC (+/-0,4V). Output disconnection voltage: 14,1V (+/-0,4V). Load current 4A max. LED indication. Operating temperature: -10°C..50°C. Dimensions: 50 x 43 x 26 mm.

The P-TRPV4 is a 4-channel passive HD video and power transmitter using twisted pair cable. Video signal: 1.0Vp-p, 75Ohm. Video transmission range (UTP5e or higher): 250m - HD-CVI(1080p), HD-TVI (720p/1080p), AHD (1080p), 350m - AHD (720p/960p), 450m - HD-CVI (720p). Impedance of the coaxial connector / connector type: 75Ohm / BNC plug (on the cable 100mm). Impedance of the unbalanced connector / connector type: 100Ohm / RJ45 socket. Attenuation: - 0.5dB / 5MHz. Power supply / connector type: socket JACK 2.5/5.5 (in set: DC power coupling connector DC plug 2.5/5.5mm / socket 2.1/5.5mm). Operation voltage: 12÷15VDC. Current (max.): 1Amp/channel, ?I=4Amp (for 12VDC). Dimensions: W=104, H=26, D=47 mm (with cable - 180mm length).

The P-TRPV120 is a 1-channel passive HD video and power transmitter using twisted pair cable. Video signal: 1.0Vp-p, 75Ohm. Video transmission range (UTP5e or higher): 250m - HD-CVI(1080p), HD-TVI (720p/1080p), AHD (1080p), 350m – AHD (720p/960p), 450m – HD-CVI (720p). Impedance of the coaxial connector / connector type: 75Ohm / BNC plug (on the cable 100mm). Impedance of the unbalanced connector / connector type: 100Ohm / RJ45 socket. Attenuation: - 0.5dB / 5MHz. Power supply / connector type: plug JACK 2.1/5.5. Operation voltage: 12÷15VDC. Current (max.): 1Amp/12VDC. Dimensions: W=22, H=10, D=40 mm (with cable - 180mm length).

The P-TRPV1 is a set of passive devices used for HD video and power transmission using a twisted pair cable. Video signal: 1.0Vp-p, 75Ohm. Video transmission range (UTP5e or higher): 250m - HD-CVI(1080p), HD-TVI (720p/1080p), AHD (1080p), 350m – AHD (720p/960p), 450m – HD-CVI (720p). Impedance of the coaxial connector / connector type: 75Ohm / BNC plug (on the cable 100mm). Impedance of the unbalanced connector / connector type: 100Ohm / RJ45 socket. Attenuation: - 0.5dB / 5MHz. Power supply / connector type: socket/plug JACK 2.1/5.5. Operation voltage: 12÷15VDC. Current (max.): 1Amp/12VDC. Dimensions: W=22, H=10, D=40 mm (with cable - 180mm length).

The set is used for video transmission using twisted-pair cable (impedance matching). Video signal: 1.0Vp-p, 75Ohm. Video transmission range: 350 m – HDCVI, 200 m – HDTVI, 350 m – AHD, 400 m – CVBS. Impedance of the coaxial connector / connector type: 75Ohm / BNC plug. Impedance of the unbalanced connector / connector type: 100Ohm / screw terminals. Attenuation: - 0.5dB / 5MHz. Dimensions: W=15, H=15, D=47 mm (with cable - 155mm length). Notes: The set consists of two transmitters.

Set of passive video HD transmitters with BNC plug on the cable. The set is used for video transmission using twisted-pair cable (impedance matching). Video signal: 1-0Vp-p, 75Ohm. Video transmission range: 450 m – HDCVI, 230 m – HDTVI, 320 m – AHD, 450 m – CVBS. Impedance of the coaxial connector / connector type: 75Ohm / BNC plug. Impedance of the unbalanced connector / connector type: 100Ohm / screw terminals. Attenuation: - 0.5dB / 5MHz. Dimensions: W=15, H=15, D=47 mm (with cable - 155mm length).

Set of passive video HD transmitters with BNC plug on the cable. The set is used for video transmission using twisted-pair cable (impedance matching). Video signal: 1-0Vp-p, 75Ohm. Video transmission range: 400 m – HDCVI, 200 m – HDTVI, 320 m – AHD, 400 m – CVBS. Impedance of the coaxial connector / connector type: 75Ohm / BNC plug. Impedance of the unbalanced connector / connector type: 100Ohm / screw terminals. Attenuation: - 0.5dB / 5MHz. Dimensions: W=15, H=15, D=47 mm (with cable - 155mm length).

Stabilized DC power supply is intended for supply any LAN devices through Ethernet Cable, which require stabilized voltage of 48V DC. The unit provide power through 4/5pins(+) and 7/8pins(-) in Ethernet cable that according to the Ethernet standard are not used to transmit data (data communication is made using pairs: 1/2 and 3/6). The Power supply can't be used in Gigabit Ethernet! The unit is protected against short-circuit and overload. Desktop type power supply unit. Size: 119 x 61 x 38 mm. Input: 90÷264VAC. Output: 0.5A/48VDC – RJ45, designed for 10Mbit/s and 100Mbit/s.

Stabilized DC power supply is intended for supply LAN devices complied with IEEE 802.3at through Ethernet Cable, which require stabilized voltage of 37÷57V DC. The unit provide power through 4/5pins(+) and 7/8pins(-) in Ethernet Cable that according to the Ethernet standard are also used to transmit data. The Power supply can't be used in Gigabit Ethernet! The unit is protected against overvoltage and overload. Desktop type power supply unit. Size: 119 x 61 x 38 mm. Input: 90÷264VAC. Output: 0.3A/52VDC – RJ45 compliant with IEEE 802.3 af, designed for 10Mbit/s and 100Mbit/s.

PoE buffer power supply unit for IP cameras. Size: 300 x 407 x 126 mm. Uin=176÷264VAC, Uout=54VDC. ?I=4x0.25A + 0.3A battery charging. Tamper: 1xNC, 4x7Ah-UVP, OLP, OVP, SCP with standard fuses or PTC fuses, FPS – (indication of output fuse activation) - OC type and relay type.

Power distribution module for IP cameras (PoE). Size: 150 x 53 x 24 mm, Uin=20÷56 VDC (+/-2%), UPoE=Uin (equal to supply voltage), 4x1.0A. Number of power inputs: 2 - DC 5.5/2.1 socket or screw terminal – max. cable length 2.5mm2. Number of PoE outputs: 4 – RJ45. Technical outputs relay and OC type: FPS - fuse failure or power failure DC. The module supports both 10Mbps and 100Mbps networks.