English
Español
  • Search
    • +34 902930427

    0.00 €

    Fire Push Buttons

    Products 117
    Manual Call Point Pluggable Connector (Pack with 10 Pcs.) [DMN789]
    Manual Call Point Pluggable Connector (Pack with 10 Pcs.)
    Ref.: DMN789
    The DMN789 is a manual call point pluggable connector allowing for the easy connection and disconnection of cables to the manual call point to simplify installation and maintenance.
    V.A.T. included
    112.36 €
    KAC® Launching Extinguishing Push Button IP67 [W3A-Y000SG-K013-65]
    KAC® Launching Extinguishing Push Button IP67
    Ref.: W3A-Y000SG-K013-65
    Launching extinguishing push button IP67 by glass breakage, with NA or NC conctact, in yellow color for fire extinguishing systems. Design for an exlusive use indoor and surface mounting or recessed through standard box. Includes plastic protection cover, SUS758 glass and PS010W surface mounting box. For aggressive environments its recommended to install it in STI3150 box.
    V.A.T. included
    301.48 €
    Flexible Replacement Plastic [PS230]
    Flexible Replacement Plastic
    Ref.: PS230
    Pack of 10 replacement plastic flexibles for KAC® resetable push buttons.
    V.A.T. included
    33.15 €
    AGUILERA™ Assistance System for People with Disabilities [AE/DDA]
    AGUILERA™ Assistance System for People with Disabilities
    Ref.: AE/DDA
    Warning and assistance system for disabled people. It is a 2-wire system, which consists of a warning button with double handle, acoustic and luminous indicator, reset button and power supply, allows, through an algorithmic module, its integration in the SA series fire panels from AGUILERA® Electrónica.
    V.A.T. included
    Consult
    AGUILERA™ Analogical MCP [AE/94-P1]
    AGUILERA™ Analogical MCP
    Ref.: AE/94-P1
    Identifiable alarm button developed and manufactured according to EN 54-11: 2000 standard. Equipped with addressable module, provided with: microswitch, alarm and self-check led, verification system with reset key, calibrated sheet so that it is locked and does not break, and microprocessor that controls its operation and informs the central of: "Alarm" , "No answer" and "Return to rest". Located in ABS box with measurements and serigraphy according to standards. Supply voltage: 18 - 27 VDC. Consumption at rest: 1.5 mA. Consumption in alarm: 4.5 mA. Temperature range: 0º to 60º C. Cable cross section: Positive: 1.5 mm². Negative: 1.5 mm². Communications: 0.75 mm². Dimensions: 95 x 95 x 35 mm. LED: Activation: fixed red. Communications: flashing red.
    V.A.T. included
    Consult
    AGUILERA™ Push Button Protector for Outdoors [AE/V-SGE]
    AGUILERA™ Push Button Protector for Outdoors
    Ref.: AE/V-SGE
    Push button protector for outdoor areas, compatible with AE/SA-PT and AE/V-PSAT models.
    V.A.T. included
    Consult
    AGUILERA™ Alarm Push Button for Outdoor [AE/V-PSIP]
    AGUILERA™ Alarm Push Button for Outdoor
    Ref.: AE/V-PSIP
    Conventional alarm push button appropriate for outdoor use, IP65 in accordance with EN54-11 standard. Dispose of micro-switch with load resistor of 470 ohm or 680 ohm, verification system with reset key and LED alarm. Allows the mounting of plastic plate calibrated to be located and don´t break or of breakable glass both provided. ABS box of 85 x 85 x 58 mm. Certified CE according to DPC. Certified LPCB. Protection: IP65.
    V.A.T. included
    Consult
    AGUILERA™ Tamper-proof Push Button Protector [AE/V-SW5]
    AGUILERA™ Tamper-proof Push Button Protector
    Ref.: AE/V-SW5
    Protective cover with tamper-proof design to avoid false alarms. Made in transparente polycarbonate resistant to temperature between -40ºC and +49ºC. Easy installation.
    V.A.T. included
    Consult
    AGUILERA™ Emergency Push Button [AE/V-PE]
    AGUILERA™ Emergency Push Button
    Ref.: AE/V-PE
    Evacuation push button design for installation in emergency exit. Green color. Indoor use. Equipped with: Micro-switch, verification system with reset key, transparent methacrylate protection cover, Contacts normally open NA, commun C and normally closed NC and plastic plate calibrated to be located and don´t break. Placed in ABS box of 98 x 98 x 50 mm.
    V.A.T. included
    Consult
    AGUILERA™ Alarm Push Button with Self-Check [AE/V-PSAT]
    AGUILERA™ Alarm Push Button with Self-Check
    Ref.: AE/V-PSAT
    Developped and made by AGUILERA™ Electrónica in accodance with EN54-11 standard. Equipped with: Micro-switch, Alarm and Self-Check LED, verification system with reset key, plastic plate calibrated to be located and don"t break. Push button with protection cover. Placed in ABS box. Certified CE emitted by LPCB. Dimensions: 98 x 95 x 39 mm.
    V.A.T. included
    Consult
    AGUILERA™ Extinguishing Push Button [AE/V-PD2]
    AGUILERA™ Extinguishing Push Button
    Ref.: AE/V-PD2
    Push button design in accordance with EN12094-3 standard to cause the activation of an extinguishing system. Yellow color. Indoor use. Screen printing with ACTIVATION EXTINCTION. Equipped with: Micro-switch, verification system with reset key, transparent methacrylate protection cover, Contacts normally open NA, commun C and normally closed NC and plastic plate calibrated to be located and don´t break. Placed in ABS box of 98 x 98 x 50 mm.
    V.A.T. included
    Consult
    AGUILERA™ Extinguishing Block Push Button [AE/V-PB2]
    AGUILERA™ Extinguishing Block Push Button
    Ref.: AE/V-PB2
    Push button design in accordance with EN12094-3 standard to lock the activation of a extinguishing system. Blue color. Indoor use. Screen printing with the text STOP EXTINCTION. Equipped with: micro-switch, verification system with reset key, transparent methacrylate protection cover, Contacts normally open NA, commun C and normally closed NC and plastic plate calibrated to be located and don´t break. Placed in ABS box of 98 x 98 x 50 mm.
    V.A.T. included
    Consult
    Low Base for AGUILERA™ Alarm MCP [AE/V-PSBB]
    Low Base for AGUILERA™ Alarm MCP
    Ref.: AE/V-PSBB
    Low profile base (28 mm).
    V.A.T. included
    2.02 €
    High Base for AGUILERA™ Alarm MCP [AE/V-PSBA]
    High Base for AGUILERA™ Alarm MCP
    Ref.: AE/V-PSBA
    Deep profile base (40 mm).
    V.A.T. included
    2.37 €
    AGUILERA™ Directionable Push Button [AE/SA-PT]
    AGUILERA™ Directionable Push Button
    Ref.: AE/SA-PT
    Identifiable alarm button developed and manufactured according to EN 54-11: 2000 standard. Equipped with addressable module, provided with: microswitch, alarm and self-check led, verification system with reset key, calibrated sheet so that it is locked and does not break, and microprocessor that controls its operation and informs the central of: "Alarm" , "No answer" and "Return to rest". Located in ABS box with measurements and serigraphy according to standards. Supply voltage: 18 - 27 VDC. Consumption at rest: 1.5 mA. Consumption in alarm: 4.5 mA. Temperature range: 0º to 60º C. Cable cross section: Positive: 1.5 mm². Negative: 1.5 mm². Communications: 0.75 mm². Dimensions: 95 x 95 x 35 mm. LED: Activation: fixed red. Communications: flashing red.
    V.A.T. included
    Consult
    EMS™ SmartCell® Wireless Alarm Button [SC-51-0100-0001-99]
    EMS™ SmartCell® Wireless Alarm Button
    Ref.: SC-51-0100-0001-99
    SmartCell call point, quick and easy to install and offers individual addressing on the SmartCell control panel. Includes a clear protective cover, 868 MHz two-way communication, fire indication LEDs, and tamper lock mechanism. Compact design.
    V.A.T. included
    Consult
    UTC™ Aritech™ Fusion™ Wireless Alarm Button [FC-200-002]
    UTC™ Aritech™ Fusion™ Wireless Alarm Button
    Ref.: FC-200-002
    Analog radio manual call point with resettable element for Aritech analog control panels, with LED status indicator and test key. Includes surface base and batteries. Frequency 868Mhz. Connection through terminals. ABS material, red color. IP24. Dimensions: 89x92x70mm. Certificates: CE and CPR (EN54 parts 11 and 25).
    V.A.T. included
    254.09 €
    CDVI® BBGP2V Emergency Exit Switch [F0521000017]
    CDVI® BBGP2V Emergency Exit Switch
    Ref.: F0521000017
    Emergency door release unit with flexible membrane. Resettable. Green. Surface mount. Protective cover. Double pole. Dimensions (L x W x D): 85 x 85 x 48mm. IP 54.
    V.A.T. included
    49.21 €
    Enclosure for Evacuation Door Key [AWO675]
    Enclosure for Evacuation Door Key
    Ref.: AWO675
    Application: The enclosure is designed to store the evacuation door key. External dimensions of the enclosure: W=95, H=195, D=43 [+/-2 mm]. Key space dimensions: W=65, H=100 D=30 [+/-2 mm]. Tamper protection: tamper – opening of the enclosure. Finish: DC01 steel plate, thickness 1,0 mm, corrosion protection, RAL 3001 (red). Notes: surface mounted enclosure, closing – lock same code (9081), porcelain screw connection – three-pole.
    V.A.T. included
    112.81 €
    KILSEN® Blue Push Button for Extinguishing Pause [DM700B09-KITR]
    KILSEN® Blue Push Button for Extinguishing Pause
    Ref.: DM700B09-KITR
    Blue pause button for surface mounting. This push button, consist in 3 voltage free contacts and is complemented with a surface base and a protection cover. Requires serie resistor of 100 ohm-2W. Dimensions: 92 x 115 x 54 mm.
    V.A.T. included
    52.14 €
    KILSEN® Yellow Push Button [DMN700Y09-KITR]
    KILSEN® Yellow Push Button
    Ref.: DMN700Y09-KITR
    Yellow resetable alarm push button for surface mounting with test key. Includes DMN800 resetable plastic, DM788W surface mounting base and DMN782 tiling lid. Requires serie resistor of 100 ohm- 2W. Dimensions: 92 x 115 x 59 mm.
    V.A.T. included
    37.74 €
    KILSEN® White Push Button [DMN700W09-KITR]
    KILSEN® White Push Button
    Ref.: DMN700W09-KITR
    White resetable alarm push button for surface mounting with test key. Includes DMN800 resetable plastic, DM788W surface mounting base and DMN782 tiling lid. Requires serie resistor of 100 ohm- 2W. Dimensions: 92 x 115 x 59 mm.
    V.A.T. included
    37.74 €
    KILSEN® Stop Emergency Blue Push Button [DM862-4]
    KILSEN® Stop Emergency Blue Push Button
    Ref.: DM862-4
    Stop extinguishingemergency push button, blue color, for surface mounting with test key. Aluminium casing. Includes serie resistor of 100ohm-2w. IP43. Dimensions: 125 x 125 x 34 mm. Certified: CPR (EN12094). Spanish.
    V.A.T. included
    90.21 €
    KILSEN® Yellow Push Button for Gas Activation [DM861-4]
    KILSEN® Yellow Push Button for Gas Activation
    Ref.: DM861-4
    Yellow extinguishing push button, for surface mounting with test key. Aluminium casing. Includes serie resistor of 100 ohm-2W. IP43. Dimensions: 125 x 125 x 34 mm. Certified: CPR (EN12094). Spanish, Portugese and Italian.
    V.A.T. included
    88.69 €
    SYSAWAY© 2025 All rights reserved