English
Español
  • Search
    • +34 902930427

    0.00 €

    Fire Software

    Products 51
    KILSEN® SW for Sensor Cable Configuration [AACU-PCC]
    KILSEN® SW for Sensor Cable Configuration
    Ref.: AACU-PCC
    Configuration software with USB cable, to configure AACULP (Cable sensor units of UTC™ KILSEN® analogue).
    V.A.T. included
    164.38 €
    AGUILERA™ Installations Remote Control SW [AGE46]
    AGUILERA™ Installations Remote Control SW
    Ref.: AGE46
    Remote control of AGE46 installations is an application that allows to control remotely fire protection installations based in control desktops Europa II and Europa III. The connection between the application and remote installations is made by using TCP/IP communications, allowing access to any facility with these kind of communications, independently of its location. In the computers hosting control desktop monitorizing the VNC server must be running AGE46SRV, providing remote access to these devices.
    V.A.T. included
    2,964.50 €
    AGUILERA™ Telecontrol Installations SW [AGE44]
    AGUILERA™ Telecontrol Installations SW
    Ref.: AGE44
    System that allows the control and remote management of fire detection installations. Telecontrol system of AE/SA-TC installations gaves important benefits in new installations, as well as the maintenance of service device. The system allows distance controlling of any installation, based in analogue or algorithmic SA series panels. Composed by AGE44 control software that allows to control the panel connected and makeing any action over the system. It is specially recommended for installations that requires a scheduled remote control from a different location. For exemple, night watchman.
    V.A.T. included
    1,067.22 €
    KILSEN® SW for LaserSense™ Configuration [9-30250]
    KILSEN® SW for LaserSense™ Configuration
    Ref.: 9-30250
    Graphic software for SenseNet network of LaserSense smoke aspiration detectors. Allows the control and monitoring of up to 127 detectors in a bus. Real time indication. 4 access protection levels. Full diagnosis. Events historical. Includes pack for validation.
    V.A.T. included
    2,659.00 €
    128 Zones KILSEN® Activation Code [2010-2-PAK-NET128]
    128 Zones KILSEN® Activation Code
    Ref.: 2010-2-PAK-NET128
    Activation code to extend the network capacity over RS485 using UTC™ analogue centrals with 3.1 or superior firmware. Upgrades 32 Nodes and 32 loops up to 32 nodes and 128 loops.
    V.A.T. included
    324.05 €
    KILSEN® Activation Codes for Integration [2010-2-PAK-RMSDK]
    KILSEN® Activation Codes for Integration
    Ref.: 2010-2-PAK-RMSDK
    Activation code enabling UTC™ analogue centrals integration, with 3.1 or superior firmware, in third parties platforms throught SDK´s via Ethernet.
    V.A.T. included
    561.51 €
    256 Zones KILSEN® Activation Code [2010-2-PAK-NET256]
    256 Zones KILSEN® Activation Code
    Ref.: 2010-2-PAK-NET256
    Activation code to extend the network capacity over RS485 using UTC™ analogue centrals with 3.1 or superior firmware. Upgrades 32 Nodes and 32 loops up to 64 nodes and 256 loops.
    V.A.T. included
    742.88 €
    UTC® ATS™ License for Platform 2010-2 (KILSEN®, Ziton ™ and Aritech ™) [ATS8645]
    UTC® ATS™ License for Platform 2010-2 (KILSEN®, Ziton ™ and Aritech ™)
    Ref.: ATS8645
    Advisor Integrated Security Management Software Upgrade License for increasing the number of connected 2X/ZP2/KPF fire panels or repeaters (per device).
    V.A.T. included
    744.17 €
    UTC® ATS™ License for FP1200 / FP2000 [ATS8644]
    UTC® ATS™ License for FP1200 / FP2000
    Ref.: ATS8644
    Advisor Integrated Security Management Software Upgrade License for increasing the number of connected FP1200/2000 fire panels or repeaters (per device).
    V.A.T. included
    744.17 €
    UTC® ATS™ License for Expansion of ATS8610 with more than 25 Licenses [ATS8640]
    UTC® ATS™ License for Expansion of ATS8610 with more than 25 Licenses
    Ref.: ATS8640
    Advisor Integrated Security Management Software Upgrade License for increasing number of drivers of ATS8610 (any type).
    V.A.T. included
    595.33 €
    Aritech™ Activation Code for Contact-ID [2010-2-PAK-900]
    Aritech™ Activation Code for Contact-ID
    Ref.: 2010-2-PAK-900
    Activation code to adapt the loop of the Aritech™ panels, with firmware 3.1 or higher, to the 900 protocol.
    V.A.T. included
    642.43 €
    KILSEN® Fire-2 Mobile License [2010-2SW-FS]
    KILSEN® Fire-2 Mobile License
    Ref.: 2010-2SW-FS
    Server license for Fire-2 Mobile application, communicated with panels through 3.0 or superior firmware.
    V.A.T. included
    154.77 €
    KILSEN® Activation Code for ID-Contact [2010-2-PAK-RMOH]
    KILSEN® Activation Code for ID-Contact
    Ref.: 2010-2-PAK-RMOH
    Activation code for analogue centras enabling ID-Contact protocol via Ethernet. This code allows UTC™ analogue centrals connection, with 3.1 or superior firmware, with alarm receiver centrals OH-NetRed.
    V.A.T. included
    151.77 €
    KILSEN® Activation Code for Modbus [2010-2-PAK-RMMB]
    KILSEN® Activation Code for Modbus
    Ref.: 2010-2-PAK-RMMB
    Activation code of Modbus standard protocole through IP, necessary 3.5 or superior panel firmware.
    V.A.T. included
    682.91 €
    KILSEN® Server License [2010-2-PCC-CF]
    KILSEN® Server License
    Ref.: 2010-2-PCC-CF
    Server licence for CU application, configuration software, allows bidirectional between PC and central, communicated with panel through 3.0 or superior firmware.
    V.A.T. included
    153.31 €
    UTC™ GST® Configuration Software v2 Dongle Key with Timer Function [DEF-KEY-TIMER]
    UTC™ GST® Configuration Software v2 Dongle Key with Timer Function
    Ref.: DEF-KEY-TIMER
    A sort of CPU or smart card based security device, to protect definition database of GST-DEF software. Unauthorized person without the dongle key is not possible to start the software, with Timer Function.
    V.A.T. included
    2,181.94 €
    UTC™ GST® Portable Programming Tool [P-9910B]
    UTC™ GST® Portable Programming Tool
    Ref.: P-9910B
    The P-9910 GST protocol programming tool, capable of reading and writing address codes, displaying model number, year of manufacture and batch number, plus display and adjust analogue sensitivity. Enable to adjust alarm threshold, N/C or N/O and switch on or off the rate of rise of dual heat detector.
    V.A.T. included
    275.98 €
    UTC™ GST® Configuration Software v2 Dongle Key [DEF-KEY]
    UTC™ GST® Configuration Software v2 Dongle Key
    Ref.: DEF-KEY
    A sort of CPU or smart card based security device, to protect definition database of GST-DEF software. Unauthorized person without the dongle key is not possible to start the software.
    V.A.T. included
    1,983.59 €
    UTC™ GST® Graphic Monitor Center [GST-GMC3.0]
    UTC™ GST® Graphic Monitor Center
    Ref.: GST-GMC3.0
    Free Download from Web. GstGMC Graphic Monitor Centre is a newly developed fire alarm system monitoring software. With friendly interface, the software may support 8 remote client stations plus local monitor station, making complete monitoring and control. Also with OLE for Process Control (OPC), the communication with fire alarm control panel?FACP? can also be integrated into other systems. The related FACP include GST200, GST200-2, GST5000 and GST-IFP8.
    V.A.T. included
    1,983.59 €
    Calibration Software for HONEYWELL™ Range SMART3 Gas Detectors [STS/CSW]
    Calibration Software for HONEYWELL™ Range SMART3 Gas Detectors
    Ref.: STS/CSW
    Calibration software for "SMART 3" sensors. Requires the mounting of STS/IDI card in the sensor. Consist of a software in a CD, a RS232/RS485 converter and a serie cable and a STS/IDI card. The program works with Windows XP.
    V.A.T. included
    704.18 €
    SW License for NOTIFIER® Key [TG-PLUS]
    SW License for NOTIFIER® Key
    Ref.: TG-PLUS
    Extra license to be added to the TG-BASE, includes the possibility of connecting to a larger analogue control panel, Modbus or an additional PC. If you want to add this license to an existing TG, you must indicate the existing TG-BASE number. Consult the equivalence table on our website.
    V.A.T. included
    2,467.07 €
    USB Key for NOTIFIER® Licenses [TG-BASE]
    USB Key for NOTIFIER® Licenses
    Ref.: TG-BASE
    License-free USB key, for use of the graphic management program. It must be ordered together with TG-C and / or TG-PLUS.
    V.A.T. included
    2,467.07 €
    USB Dongle for Programming with NOTIFIER® Agile IQ Perpetual License [NRX-USB-PRO]
    USB Dongle for Programming with NOTIFIER® Agile IQ Perpetual License
    Ref.: NRX-USB-PRO
    Device for connection to a PC through a USB port and that allows communication with Agile devices through the use of Agile IQ software.
    V.A.T. included
    1,269.69 €
    SW License for NOTIFIER® Key [TG-C]
    SW License for NOTIFIER® Key
    Ref.: TG-C
    Extra license to be added to the TG-BASE, includes the possibility of connecting to a conventional control panel, an analogue control panel with a loop or up to 10 compatible Vesda aspiration detectors. If you want to add this license to an existing TG, you must indicate the existing TG-BASE number. Consult the equivalence table on our website.
    V.A.T. included
    816.64 €
    SYSAWAY© 2024 All rights reserved