English
Español
  • Search
  • 0.00 €

    Fire

    Products 2730
    • Access Control Readers
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    AGUILERA™ Direction Programmer with 9V Alkaline Battery [AE/SA-PRG]
    AGUILERA™ Direction Programmer with 9V Alkaline Battery
    Ref.: AE/SA-PRG
    Portable device to program the number of idendification code of each algorithm that allows to: Record the address of the equipment , read the stored adress, inhibit/authorize individually the LED flash of the device. The programmation process is individual for each device and can be done from the algorithm central.
    V.A.T. included
    128.07 €
    KILSEN® SW for Sensor Cable Configuration [AACU-PCC]
    KILSEN® SW for Sensor Cable Configuration
    Ref.: AACU-PCC
    Configuration software with USB cable, to configure AACULP (Cable sensor units of UTC™ KILSEN® analogue).
    V.A.T. included
    164.38 €
    UTC™ Aritech™ (10 Pack) 400/500/700/2000 Replacement Chamber [211]
    UTC™ Aritech™ (10 Pack) 400/500/700/2000 Replacement Chamber
    Ref.: 211
    The 211 is a replacement optical chamber for Aritech 400, 500, 700 and 2000 series detectors. Easy replacement is supported by a detector design that allows a contaminated (dirty) chamber to be removed and replaced by a clean chamber without the need for special tools. As simple click-out, click-in mechanism makes replacement possible in a couple of seconds. The detector automatically re-calibrates the detection sensitivity on first start up.
    V.A.T. included
    135.63 €
    UTC™ Aritech™ 700 Series 6 Terminal Conventional 2-wire Base - 100 mm [DB702]
    UTC™ Aritech™ 700 Series 6 Terminal Conventional 2-wire Base - 100 mm
    Ref.: DB702
    The DB702 is a conventional fire detector base used for all 700 series conventional fire detectors. It includes a normally closed continuity switch to allow for easy cable testing during installation. Inserting a detector into the base “opens” the continuity switch in the base to allow for standard open circuit monitoring. A locking mechanism implementation in conjunction with the detector allows for the detector to be safeguarded against unauthorized removal.
    V.A.T. included
    4.79 €
    PFANNENBERG™ IP66 EN54/3 and EN54/23 Flash Sounder with Transparent Lens [PA X 1-05-CL]
    PFANNENBERG™ IP66 EN54/3 and EN54/23 Flash Sounder with Transparent Lens
    Ref.: PA X 1-05-CL
    Sounder and flash light combined. 24VDC IP66 105 db. 5 joules Internal adjustable volume. Shockproof. RAL3000 red body, transparent lens. Temperature -40 to + 55º C. EN 54.3 and EN 54.23
    V.A.T. included
    788.84 €
    KAC® Launching Extinguishing Push Button IP67 [W3A-Y000SG-K013-65]
    KAC® Launching Extinguishing Push Button IP67
    Ref.: W3A-Y000SG-K013-65
    Launching extinguishing push button IP67 by glass breakage, with NA or NC conctact, in yellow color for fire extinguishing systems. Design for an exlusive use indoor and surface mounting or recessed through standard box. Includes plastic protection cover, SUS758 glass and PS010W surface mounting box. For aggressive environments its recommended to install it in STI3150 box.
    V.A.T. included
    301.48 €
    Prohibition and Fire Signboard Type 3 (Plastic Sheet - Class B) [P-178-B]
    Prohibition and Fire Signboard Type 3 (Plastic Sheet - Class B)
    Ref.: P-178-B
    Indication Signboard for fire protection element. Made of methacrylate. Designed under UNE 23035 part 1, 2, 3 and 4 standard of 1995 and 1994. Photoluminescent. FIRE DOOR - KEEP CLOSED.
    V.A.T. included
    3.21 €
    AGUILERA™ 50Kg Retainer [AE/V-R2450B15]
    AGUILERA™ 50Kg Retainer
    Ref.: AE/V-R2450B15
    Retainer 50 Kg/490N for floor with extendable arm from 15 to 18 cm, with traction plate, release button, 2 protection diodes. EN 1155 certified. Protection: IP40. Consumption: 45mA 24Vcc.
    V.A.T. included
    Consult
    AGUILERA™ Algorithmic Detector Base with Sounder [ AE/SA-ASG3S]
    AGUILERA™ Algorithmic Detector Base with Sounder
    Ref.: AE/SA-ASG3S
    Base for algorithmic detector equipped with siren. The siren is powered at 24 Vdc from a monitored output module of the algorithmic panel. The detector is connected to the socket's own connectors. Maximum consumption 5 mA. Sound level 90 dB (A).
    V.A.T. included
    83.25 €
    AGUILERA™ Algorithmic Detector Base with Sounder + Spotlight [ AE/SA-ASG3]
    AGUILERA™ Algorithmic Detector Base with Sounder + Spotlight
    Ref.: AE/SA-ASG3
    Base for algorithmic detector equipped with siren and low consumption light bulb. The siren and the focus are powered at 24 Vdc from a monitored output module of the algorithmic control unit. The detector is connected to the socket's own connectors. Maximum consumption 10 mA. Sound level 90 dB (A).
    V.A.T. included
    163.66 €
    AGUILERA™ 2-Loop Analog Cards [AE/SA-TA]
    AGUILERA™ 2-Loop Analog Cards
    Ref.: AE/SA-TA
    Two analog loop control unit with independent microprocessor. The capacity of each loop is 125 pieces of equipment, to which the detectors, buttons, maneuver modules, control modules and other elements that make up the installation are connected. Total control capacity of 250 teams. It has light indicators to control the correct operation and communications with the equipment and the control unit.
    V.A.T. included
    Consult
    AGUILERA™ Master Module [AE/94-M]
    AGUILERA™ Master Module
    Ref.: AE/94-M
    Addressable module developed to control a series of conventional detectors or pushbuttons in a 2-wire controlled loop, which can correspond to a specific area, sector or room.
    V.A.T. included
    Consult
    AGUILERA™ Assistance System for People with Disabilities [AE/DDA]
    AGUILERA™ Assistance System for People with Disabilities
    Ref.: AE/DDA
    Warning and assistance system for disabled people. It is a 2-wire system, which consists of a warning button with double handle, acoustic and luminous indicator, reset button and power supply, allows, through an algorithmic module, its integration in the SA series fire panels from AGUILERA® Electrónica.
    V.A.T. included
    Consult
    AGUILERA™ Thermal Detector [AE/94-TVA]
    AGUILERA™ Thermal Detector
    Ref.: AE/94-TVA
    Microprocessed temperature detector that programmed from the control unit controls the temperature parameters in two levels: Differential and thermal. The thermal detectors are specially designed for those places where the fire starts with sudden rises in temperature or where smoke detectors are not recommended due to the existence of combustion gases in the environment.
    V.A.T. included
    Consult
    SYSAWAY© 2024 All rights reserved