Provides single channel monitoring of normally open contact fire alarm and supervisory devices. The TC809E1043 has a single tri-colour green/red/yellow LED, which can be set by panel command to pulse green each time the module is polled. In case of an alarm the panel can switch the red indicator on continuously. The Yellow LED is controlled by the module and blinks to indicate an open circuit on the input circuit. This fault indication is overridden by a panel command to turn the red LED on.

Supervised input wireless module and voltage-free output for Aritech™ analogical panels. Frequency 868 MHz. Occupies an analog address. It is powered by 6 AA batteries MN 1500 LR6, autonomy of up to 5 years. Dimensions 240 x 120 x 50 mm. Certificates: CE and CPR (EN54 parts 18 and 25).

In the event of short circuit on the detector loop the C-9503 Isolators either side of the loop will defect the problem and open circuit and isolates the faulty part of the loop, enabling other devises on the unaffected part of the loop to operate normally. The module will continue to monitor for the fault to be repaired, once the fault is cleared the isolator will automatically reinstate the effected part of the loop.

I-9319 intelligent zone monitor unit is an addressable interface module, which will integrate conventional detectors or conventional manual call points to addressable system. When any of the connected devices alarms are active, the unit can send the alarm message to fire alarm controller, which generates alarm signal and displays its address. The unit can match with the conventional optical smoke detector, conventional rate of rise and fixed temperature detector and conventional manual call point etc. It has the function of checking short or open circuit of the output connection, by the End of Line Resistor (EOLR) or Active End of Line unit (AEOL recommended). The fault massage includes open circuit, short circuit or any removal of the detectors. Electronic addressing can be done through Handheld Programming tool (P-9910), purchased separately.

With a microprocessor, I-9301 Addressable Single I/O Module can communicate with fire alarm control panel (FACP), check power cut, control output and LED. The module closes the output relay and illuminates the LED when receiving start command from fire alarm control panel.

P-9935EVAX RS232 communication card provide interface between GST-IFP8 series panel and EVAX system MP via RS232 port. Create Cause and Effect on GST-IFP8 panel able to active the EVAX related paging zone broadcast evacuation message automatically in case fire. In order to achieve this function, need put some virtue device on cause and effect, the virtue device first 3 digit number must same as the paging zone number, and second 3 digit number is 000, virtue device type is 30. For example: 001***03 + 001***02 + 001***11= 001000 30 00. It means when there is a fire alarm from zone 1 cause by smoke detector or heat detector or MCP, paging zone 1 of EVAX system will broadcast evacuation message immediately.

La tarjeta de comunicación ASCII P-9935 es una tarjeta opcional para el panel de control GST-IFP8, que proporciona una interfaz ASCII estándar para la integración del sistema de terceros. Esta tarjeta no debe insertarse ni retirarse cuando se activa. Cumple con el protocolo de comunicación STC de Ucrania.

Fiber optic interface for GST-IFP8 control panels. For single-mode fibers, distance up to 25 kms.

P-9965A network card provides CAN Class A network connection to GST-IFP8 panel. All panels are connected in peer to peer topology. In case of cable break among the network, there is still redundancy communication route. Compatible Panel: GST-IFP8 panel Communication Protocol: CAN. Node capacity: 99. Baud Rate: 10,000. Cable Requirement: Minimum 1.0 mm2 Fire Cable Communication Distance: 3000 meters.

A2 Custom Graphic Repeater Panel /w Facia & Box

A1 Custom Graphic Repeater Panel /w Facia & Box

This Intelligent Fire Alarm Control Panel is modularized multi-loop model, can be expanded to 8 loops (Max. 10 loops without network function). The panel is suitable for small to medium projects. Max.999 zones, 140 have individual alarm and fault/disable LEDs and a label. 8 Class A loops, total capacity of 1936 devices. 15X40 LCD screen, assisting the 17 LEDs to display important information. Compatible with full series of GST addressable and digital products. Non-Volatile memory ensures the data does not loss even if power supply is accidentally removed. Hong Kong version. LPCB certified.

This Intelligent Fire Alarm Control Panel is modularized multi-loop model, can be expanded to 8 loops (Max. 10 loops without network function). The panel is suitable for small to medium projects. Max.999 zones, 140 have individual alarm and fault/disable LEDs and a label. 8 Class A loops, total capacity of 1936 devices. 15X40 LCD screen, assisting the 17 LEDs to display important information. Compatible with full series of GST addressable and digital products. Non-Volatile memory ensures the data does not loss even if power supply is accidentally removed. French version. LPCB certified.

This Intelligent Fire Alarm Control Panel is modularized multi-loop model, can be expanded to 8 loops (Max. 10 loops without network function). The panel is suitable for small to medium projects. Max.999 zones, 140 have individual alarm and fault/disable LEDs and a label. 8 Class A loops, total capacity of 1936 devices. 15X40 LCD screen, assisting the 17 LEDs to display important information. Compatible with full series of GST addressable and digital products. Non-Volatile memory ensures the data does not loss even if power supply is accidentally removed. Italian version. LPCB certified.

GST200N is single loop panel, possible to be expanded the 2-loop version GST200N-2. They are suitable for small buildings like office, restaurant, store, shop, etc., provide simple installation, operation, and easy maintenance. Wide range power supply, 100-240VAC, 50-60Hz. Max. 30 zones. Each zone has its own alarm and fault/disable indicator and a label. Capacity 235 addressable devices. Optional expanded to 2 loops, 477 loop devices. Compatible with GST intelligent and digital products. 8X18 characters LCD screen. Non-Volatile memory ensures the data does not loss even if power supply is accidentally removed. Hong Kong version.

This Intelligent Fire Alarm Control Panel is modularized multi-loop model, can be expanded to 8 loops (Max. 10 loops without network function). The panel is suitable for small to medium projects. Max.999 zones, 140 have individual alarm and fault/disable LEDs and a label. 8 Class A loops, total capacity of 1936 devices. 15X40 LCD screen, assisting the 17 LEDs to display important information. Compatible with full series of GST addressable and digital products. Non-Volatile memory ensures the data does not loss even if power supply is accidentally removed. Spanish version. LPCB certified.

This Intelligent Fire Alarm Control Panel is modularized multi-loop model, can be expanded to 8 loops (Max. 10 loops without network function). The panel is suitable for small to medium projects. Max.999 zones, 140 have individual alarm and fault/disable LEDs and a label. 8 Class A loops, total capacity of 1936 devices. 15X40 LCD screen, assisting the 17 LEDs to display important information. Compatible with full series of GST addressable and digital products. Non-Volatile memory ensures the data does not loss even if power supply is accidentally removed. Portuguese version. LPCB certified.

GST200S is single loop panel, possible to be expanded the 2-loop version GST200N-2. They are suitable for small buildings like office, restaurant, store, shop, etc., provide simple installation, operation, and easy maintenance. Wide range power supply, 100-240VAC, 50-60Hz. Max. 30 zones. Each zone has its own alarm and fault/disable indicator and a label. Capacity 235 addressable devices. Optional expanded to 2 loops, 477 loop devices. Compatible with GST intelligent and digital products. 8X18 characters LCD screen. Non-Volatile memory ensures the data does not loss even if power supply is accidentally removed.

Two-loop analogical fire detection panel, expandable to 4 (2X-LB). Maximum capacity: 256 devices expandable to 512. 512 zones. 4 supervised outputs pre-programmed as sirens. 4 additional outputs (alarm and general fault), 2 voltage-free and 2 supervised. 2 configurable inputs. Includes printer. Ethernet port. Allows you to send emails. Integrable in ATS8600. Graphic LCD, 3 USB ports and RS232 port. Connectable in RS485 network through optional card (2010-2-NB). 20/40 zone LED card option. Auxiliary output 24VDC with optional reset, 3 levels of operator. 9999 events. Certificates: CE, CPR (EN54 parts 2, 4 and 13), WEEE and RoHS. Requires 2 batteries not included (BS131N). Dimensions: 450 x 550 x 171 mm. Includes 1 loop expansion card ref. 2X-LB.

Two-loop analogical fire detection panel, expandable up to 4 (2X-LB). Maximum capacity: 256 devices expandable to 512. 512 zones. 4 supervised outputs pre-programmed as sirens. 4 additional outputs (alarm and general fault), 2 voltage-free and 2 supervised. 2 configurable inputs. Ethernet port. Allows you to send emails. Integrable in ATS8600. Graphic LCD, 3 USB ports and RS232 port. Connectable in RS485 network through optional card (2010-2-NB). 20/40 zone LED card option. 24Vdc auxiliary output with optional reset, 3 operator levels. 9999 events. Certificates: CE, CPR (EN54 parts 2, 4 and 13), WEEE and RoHS. Requires 2 batteries not included (BS131N). Dimensions: 450 x 550 x 171 mm. Includes 1 loop expansion card ref. 2X-LB.

Expandable card with 8 configurable relays outputs. Can admit a maximum of 2 cards 020-747 in each NFS serie panel.

Card of two configurable relays NA/NC as siren output, alarm relay, fault relay, output for notification to firefighters, etc... By default, the relays are configurated as alarm and failure relay.