English
Español
  • Search
    • +34 902930427

    0.00 €

    Readers

    Products 683
    Low Range CDVI® PASS ™ Antenna AN02RCP with Built-in Receiver [F0103000138]
    Low Range CDVI® PASS ™ Antenna AN02RCP with Built-in Receiver
    Ref.: F0103000138
    The trigger antenna AN02RCP transmits periodically a trigger signal (with a period of 0,5 - 2,4 Sec) at 125 KHz, with a predefined pattern, that awakes the active cards standing in the detection zone [0,3 - 6 m]. Once awakened, the card, at its turn, sends a signal at 433,92 MHz to the built-in receiver of the antenna. The receiver can activate directly a relay or send out on the bus wiegand the s/n of the tag, that can be managed by a further access control system. The memory of the built-in receiver can hold up to 500 cards. A 10-position rotary switch allows to identify each antenna with a unique number, included in the wiegand protocol ( 26,30 or 44 bits ). Each antenna can even be enabled by an external PIR ( not provided ).
    V.A.T. included
    415.03 €
    Long Range CDVI® PASS™ Antenna AN01RCP with Built-in Receiver [F0103000139]
    Long Range CDVI® PASS™ Antenna AN01RCP with Built-in Receiver
    Ref.: F0103000139
    The trigger antenna AN01RCP transmits periodically a trigger signal (with a period of 0,5 - 2,4 Sec) at 125 KHz, with a predefined pattern, that awakes the active cards standing in the detection zone [6 - 15 m]. Once awakened, the card, at its turn, sends a signal at 433,92 MHz to the built-in receiver of the antenna. The receiver can activate directly a relay or send out on the bus wiegand the s/n of the tag, that can be managed by a further access control system. The memory of the built-in receiver can hold up to 500 cards. A 10-position rotary switch allows to identify each antenna with a unique number, included in the wiegand protocol (26, 30 or 44 bits). Each antenna can even be enabled by an external PIR (not provided).
    V.A.T. included
    701.80 €
    Long Range CDVI® PASS™ Antenna AN01CP with Stand [F0103000119]
    Long Range CDVI® PASS™ Antenna AN01CP with Stand
    Ref.: F0103000119
    The trigger antenna AN01RCP transmits periodically a trigger signal (with a period of 0,5 - 2,4 Sec) at 125 KHz, with a predefined pattern, that awakes the active cards standing in the detection zone [6 - 15 m]. Once awakened, the card, at its turn, sends a signal at 433,92 MHz to the built-in receiver of the antenna. The receiver can activate directly a relay or send out on the bus wiegand the s/n of the tag, that can be managed by a further access control system. The memory of the built-in receiver can hold up to 500 cards. A 10-position rotary switch allows to identify each antenna with a unique number, included in the wiegand protocol (26, 30 or 44 bits). Each antenna can even be enabled by an external PIR (not provided).
    V.A.T. included
    Consult
    CDVI® DTRR1434 Long Range Reader [F0103000087]
    CDVI® DTRR1434 Long Range Reader
    Ref.: F0103000087
    Long range reader with Wiegand output, adjustable range up to 15 m, can read up to 20 cards simultaneously, surface mounting.
    V.A.T. included
    267.41 €
    UPASS™ Adjustable Mounting Kit [ 9875840]
    UPASS™ Adjustable Mounting Kit
    Ref.: 9875840
    Enables reader adjustment of the uPASS™ Reach at the desired angle and direction to ensure reliable reading. The mounting set can also be used for mounting the reader to round or square masts.
    V.A.T. included
    Consult
    Protective Visor for NEDAP® uPASS™ Target [9218335]
    Protective Visor for NEDAP® uPASS™ Target
    Ref.: 9218335
    Protects the uPASS™ Target from temperature rise by means of long lasting exposure to the sun.
    V.A.T. included
    Consult
    NEDAP® uPASS™ Target Antenna [9219021]
    NEDAP® uPASS™ Target Antenna
    Ref.: 9219021
    External antenna for the uPASS Target reader. The combination (uPASS Target reader + uPASS™ Target Antenna) can be used to extend the read-range of the reader for a wider scope. Additionally, the external antenna can be used in situations where reading of both vehicle entry and exit lanes is required. The Wall Mounting Set (part number 9984364) is standard included.
    V.A.T. included
    Consult
    NEDAP® uPASS™ Target Reader [9217363]
    NEDAP® uPASS™ Target Reader
    Ref.: 9217363
    High-end UHF reader for long-range identification up to 10 meters (33ft.) for demanding situations. The Wall Mounting Set (part number 9984364) is standard included. ISO 18000 EPC Gen2 compliant.
    V.A.T. included
    Consult
    Protective Visor for NEDAP® uPASS™ [7591152]
    Protective Visor for NEDAP® uPASS™
    Ref.: 7591152
    Pole mounting kit for uPASS™ REACH reader.
    V.A.T. included
    Consult
    Mounting Kit for NEDAP® uPASS™ [9943803]
    Mounting Kit for NEDAP® uPASS™
    Ref.: 9943803
    Pole mounting kit, including uPASS™ protection cover.
    V.A.T. included
    Consult
    ENTRY™ Anchored kit to Mast [9875840]
    ENTRY™ Anchored kit to Mast
    Ref.: 9875840
    Swivel support for easy orientation, aluminum made. Only for the ENTRY ™ reader.
    V.A.T. included
    Consult
    Protective Visor for NEDAP® TRANSIT™ [9218327]
    Protective Visor for NEDAP® TRANSIT™
    Ref.: 9218327
    Additional protector for TRANSIT™ readers, for extreme climatic conditions. Compatible with wall and pole kits.
    V.A.T. included
    Consult
    Mast Anchored Kit [5626595]
    Mast Anchored Kit
    Ref.: 5626595
    Pole mounting kit for TRANSIT™ readers. Galvanized steel suitable for cilindric poles or squares up to 190 mm (diameter( or 150 mm (side).
    V.A.T. included
    Consult
    NEDAP® uPASS™ ACCESS Reader [9958240]
    NEDAP® uPASS™ ACCESS Reader
    Ref.: 9958240
    UHF (860 - 950 MHz) RFID reader, up to 2 meters range. Based on EPC GEN2 standar. Includes RS232 and 422 output for FIRMWARE and Wiegand 26 bits output directly.
    V.A.T. included
    Consult
    NEDAP® uPASS™ REACH Reader [9942319]
    NEDAP® uPASS™ REACH Reader
    Ref.: 9942319
    UHF (860 - 950 MHz) RFID reader, up to 4 meters range. Based on EPC GEN2 standar. Includes RS232 and 422 output for FIRMWARE and Wiegand 26 bits output directly.
    V.A.T. included
    Consult
    NEDAP® TRANSIT™ ENTRY™ Reader [9876200]
    NEDAP® TRANSIT™ ENTRY™ Reader
    Ref.: 9876200
    ISM (2446-2454 GHz) RFID reader, up to 4 meters range at 200 Km/h. Includes mounting wall kit, RS232 communications plate, and Wiegand 26 bits preconfigured protocol.
    V.A.T. included
    Consult
    NEDAP® TRANSIT™ ATEX Reader [9840990]
    NEDAP® TRANSIT™ ATEX Reader
    Ref.: 9840990
    ISM (2446-2454 GHz) RFID reader, up to 10 meters range at 200 Km/h, with KEMA 01 ATEX 2145 certification. Includes mounting wall kit, RS232 communications plate and Wiegand 26 bits preconfigured protocol.
    V.A.T. included
    Consult
    NEDAP® TRANSIT™ Ultimate Reader [9215689]
    NEDAP® TRANSIT™ Ultimate Reader
    Ref.: 9215689
    ISM (2446-2454 GHz) RFID reader, up to 10 meters range at 200 Km/h. Includes mounting wall kit, RS232 and Wiegand 26 bits preconfigured protocol communications board.
    V.A.T. included
    Consult
    HID® iCLASS™ SE U90 (NAM) Reader [RDRSEU909]
    HID® iCLASS™ SE U90 (NAM) Reader
    Ref.: RDRSEU909
    Long range contactless UHF card reader. Interoperable with SIO™ environment, just for long range between 3 and 5 metres. Wiegand and OSDP output protocol. Ideal for vehicle access control inexternal installations (IP65). Common Criteria Rating: EAL5+. NAM Antenna.
    V.A.T. included
    1,685.66 €
    HID® iCLASS™ SE U90 (EMEA) Reader [RDRSEU908]
    HID® iCLASS™ SE U90 (EMEA) Reader
    Ref.: RDRSEU908
    Long range contactless UHF card reader. Interoperable with SIO™ environment, just for long range between 3 and 5 metres. Wiegand and OSDP output protocol. Ideal for vehicle access control inexternal installations (IP65). Common Criteria Rating: EAL5+. EMEA Antenna.
    V.A.T. included
    1,685.66 €
    Magnetic Contact Mechanism P 14 [140000000080]
    Magnetic Contact Mechanism P 14
    Ref.: 140000000080
    Mechanism of encodable magnetic contact lock with lid P 14. Does not require power supply. It has an electrical contact of 10 A 230 V, with a guaranteed microswitch for 10 million operations. The number of keys admitted is unlimited and they have been built with the highest quality materials that prevent their oxidation or deterioration.
    V.A.T. included
    69.48 €
    Magnetic Contact Mechanism P 8 [140000000028]
    Magnetic Contact Mechanism P 8
    Ref.: 140000000028
    Mechanism of encodable magnetic contact lock with cover P 8. Does not require power supply. It has an electrical contact of 10 A 230 V, with a guaranteed microswitch for 10 million operations. The number of keys admitted is unlimited and they have been built with the highest quality materials that prevent their oxidation or deterioration.
    V.A.T. included
    51.24 €
    Magnetic Contact Reader CK 20 [140000000220]
    Magnetic Contact Reader CK 20
    Ref.: 140000000220
    Lock for magnetic keys LK 10. No power required. It has an electrical contact of 10 A 230 V, with a guaranteed microswitch for 10 million operations. The number of keys admitted is unlimited and they have been built with the highest quality materials that prevent their oxidation or deterioration.
    V.A.T. included
    91.44 €
    DORLET® 70-EAN-BM-PRX-CCTV Terminal [13070000]
    DORLET® 70-EAN-BM-PRX-CCTV Terminal
    Ref.: 13070000
    Mixed magnetic and / or proximity card reader (ISO14443A, INDALA®, HID® ...), 16-key membrane keyboard, 4x16 character display. It incorporates camera. Dimensions: 220 x 185 x 55 mm. Indicate proximity technology when ordering.
    V.A.T. included
    Consult
    SYSAWAY© 2024 All rights reserved