HPB batteries are maintenance-free Valve Regulated Lead Acid Batteries with self-regulating one-sided safety valves and internal gas recombination. The batteries are made in AGM (Absorbent Glass Mat) technology; the electrolyte is held in the glass mat. The technology used allows installing batteries in places with natural (gravity) ventilation and minimizes maintenance. They are dedicated for devices requiring emergency power to a load when the input power source or mains power fails, such as: buffer power supplies used, among others, in CCTV systems, alarm systems (Intrusion Detection Systems, IDS), and access control systems (ACS), UPS units, etc... Nominal voltage: 12 VDC. Nominal capacity:9 Ah. Projected lifespan: 5 to 8 years at 20°C. Charging current: Recommended 0.9 Amp, Maximum 2.7 Amp. Dimensions: W=152, H=100, D=65 [mm, +/-2].

HPB batteries are maintenance-free Valve Regulated Lead Acid Batteries with self-regulating one-sided safety valves and internal gas recombination. The batteries are made in AGM (Absorbent Glass Mat) technology; the electrolyte is held in the glass mat. The technology used allows installing batteries in places with natural (gravity) ventilation and minimizes maintenance. They are dedicated for devices requiring emergency power to a load when the input power source or mains power fails, such as: buffer power supplies used, among others, in CCTV systems, alarm systems (Intrusion Detection Systems, IDS), and access control systems (ACS), UPS units, etc... Nominal voltage: 12 VDC. Nominal capacity: 80 Ah. Projected lifespan: 5 to 8 years at 20°C. Charging current: Recommended 8 Amp, Maximum 24 Amp. Dimensions: W=260 H=215 D=168 [mm, +/-2].

HPB batteries are maintenance-free Valve Regulated Lead Acid Batteries with self-regulating one-sided safety valves and internal gas recombination. The batteries are made in AGM (Absorbent Glass Mat) technology; the electrolyte is held in the glass mat. The technology used allows installing batteries in places with natural (gravity) ventilation and minimizes maintenance. They are dedicated for devices requiring emergency power to a load when the input power source or mains power fails, such as: buffer power supplies used, among others, in CCTV systems, alarm systems (Intrusion Detection Systems, IDS), and access control systems (ACS), UPS units, etc... Nominal voltage: 12VDC. Nominal capacity: 2.3Ah. Projected lifespan: 5 to 8 years at 20°C. Charging current: Recommended 0.23 Amp, Maximum 0.69 Amp. Dimensions: W=178, H=68, D=35 [mm, +/-2].

HPB batteries are maintenance-free Valve Regulated Lead Acid Batteries with self-regulating one-sided safety valves and internal gas recombination. The batteries are made in AGM (Absorbent Glass Mat) technology; the electrolyte is held in the glass mat. The technology used allows installing batteries in places with natural (gravity) ventilation and minimizes maintenance. They are dedicated for devices requiring emergency power to a load when the input power source or mains power fails, such as: buffer power supplies used, among others, in CCTV systems, alarm systems (Intrusion Detection Systems, IDS), and access control systems (ACS), UPS units, etc... Nominal voltage: 12 VDC. Nominal capacity: 1.2 Ah. Projected lifespan: 5 to 8 years at 20°C. Charging current: Recommended 0.12 Amp, Maximum 0.36 Amp. Dimensions: W=98, H=59, D=44 [mm, +/-2].

This Power Supply Unit is mounted in the VX-2000PF Power Supply Frame when in use. There are 2 DC output channels per unit. Use the VX-200PS in the number suited to the required total system power. Power Source: 230 V AC, 50/60 Hz. Power Consumption: 580 W. Weight: 14,5 kg.

The VX-3000DS is an emergency power supply manager used for the SX-2000, VX-2000 and VM-3000 systems. It is a 3U rack-mountable unit equipped with a battery charger and double-switching power supplies, which contribute to rack space, energy savings and lightweight design. The VX-3000DS is characterized by its easy maintenance, as the function setting switch and the kill switch are located inside the front panel, and the fuse change can be done at the rear of the unit. DC power supply to all system components. Combination of two integrated power supplies with a high performance charger. Automatic switch to auxiliary battery power if AC power supply does not work. VX-3000DS: EN 54-4 Certification, Certificate No. 1134-CPR-137.

DC power supply to all system components. Combination of integrated power supply with a high performance charger. Automatic switch to auxiliary battery power if AC power supply does not work. VX-3150DS: EN 54-4 Certification, Certificate No. 1134-CPR-137.

25 VCC and 200 mA Power Supply, for microphone desks for VM-300 system, RM-200M and RM-300MF. Weight: 420 g.

This Power Supply Frame permits the VX-200PS Power Supply Unit to be mounted in an equipment rack. Up to 3 VX-200PS units can be installed in the unit. Usable Unit: VX-200PS (up to 3). Dimensions: 483 x 132,6 x 324,8 mm. Weight: 4,8 kg.

Emergency Power Supply Unit supplies the DC power to each equipment in the VX-2000 system by connecting the VX-200PS Power Supply Unit. It keeps the battery unit that contains 2 × 12 V sealed lead batteries charged compensating for the temperature of the battery charging voltage. When the DC power supply from the VX-200PS stops, the VX-2000DS is automatically switched to the backup battery. Dimensions: 482 x 88,4 x 377,6 mm. Weight: 580 g.

Switch mode buffer power supply unit (with a transformer) EN54/LCD series. Dimensions: 420 x 420 x 182 mm, Input: 230V AC (-15%/+10%), Output: 5,0A / 27,6VDC - for continuous operation, 7,0A / 27,6VDC - for intermittent operation, tamper: 1xNC anti-sabotage protection. Space for battery 12V SLA ( 2x40Ah ), battery protection (UVP). Technical outputs: EPS (AC network failure), PSU (power supply failure) and APS (battery failure). Compliant with EN54-4 for fire alarm systems.

Switch mode buffer power supply unit (with a transformer) EN54/LED series. Dimensions: 420 x 420 x 182 mm, Input: 230V AC (-15%/+10%), Output: 1,5A / 27,6VDC - for continuous operation, 3,0A / 27,6VDC - for intermittent operation, tamper: 1xNC anti-sabotage protection. Space for battery 12V SLA ( 2x28Ah ), battery protection (UVP). Technical outputs: EPS (AC network failure), PSU (power supply failure) and APS (battery failure). Compliant with EN54-4 for fire alarm systems.

Switch mode buffer power supply unit (with a transformer) EN54/LED series. Dimensions: 420 x 420 x 182 mm, Input: 230V AC (-15%/+10%), Output: 5,5A / 27,6VDC - for continuous operation, 7,0A / 27,6VDC - for intermittent operation, tamper: 1xNC anti-sabotage protection. Space for battery 12V SLA ( 2x28Ah ), battery protection (UVP). Technical outputs: EPS (AC network failure), PSU (power supply failure) and APS (battery failure). Compliant with EN54-4 for fire alarm systems.

Switch mode buffer power supply unit (with a transformer) EN54/LED series. Dimensions: 420 x 420 x 102 mm, Input: 230V AC (-15%/+10%), Output: 1,0A / 27,6VDC - for continuous operation, 2,0A / 27,6VDC - for intermittent operation, tamper: 1xNC anti-sabotage protection. Space for battery 12V SLA ( 2x17Ah ), battery protection (UVP). Technical outputs: EPS (AC network failure), PSU (power supply failure) and APS (battery failure). Compliant with EN54-4 for fire alarm systems.

Switch mode buffer power supply unit (with a transformer) EN54/LED series. Dimensions: 420 x 420 x 182 mm, Input: 230V AC (-15%/+10%), Output: 3,5A / 27,6VDC - for continuous operation, 5,0A / 27,6VDC - for intermittent operation, tamper: 1xNC anti-sabotage protection. Space for battery 12V SLA ( 2x28Ah ), battery protection (UVP). Technical outputs: EPS (AC network failure), PSU (power supply failure) and APS (battery failure). Compliant with EN54-4 for fire alarm systems.

Switch mode buffer power supply unit (with a transformer) EN54/LCD series. Dimensions: 420 x 420 x 102 mm, Input: 230V AC (-15%/+10%), Output: 2,0A / 27,6VDC - for continuous operation, 3,0A / 27,6VDC - for intermittent operation, tamper: 1xNC anti-sabotage protection. Space for battery 12V SLA ( 2x17Ah ), battery protection (UVP). Technical outputs: EPS (AC network failure), PSU (power supply failure) and APS (battery failure). Compliant with EN54-4 for fire alarm systems.

The buffer power supply is designed in accordance with the requirements of the EN 50131-6 standard, grade 1÷2 and II environmental class. It is intended for an uninterrupted supply of alarm system devices requiring stabilized voltage of 12 V DC (+/-15%). Alinear stabilizing system, which has been used in the unit, provides voltage with a lower level of noise and a quicker response to interference when compared to a switched-mode regulator. Power supply: 230VAC/50Hz. Power supply output: (1) 3A/13,8VDC - for general application (2) 1,4A/13,8VDC - for grade 1, 2. Battery charging current: 0,4A/0,9A. Fitting battery: 17Ah/12V. Current consumption by PSU systems: 15 mA max. Protections: SCP, OLP, OVP, UVP, tamper (opening of the enclosure). Technical outputs OC type: EPS - 230V power failure AC, PSU - power supply failure, APS – battery failure. Compliance with the standards: EN50131-6. Dimensions: W=230 H=300 D+D1=82+8 mm [+/- 2mm]. Surface mounted enclosure, locking – bolted.

The buffer power supply is designed in accordance with the requirements of the EN 50131-6 standard, grade 1÷2 and II environmental class. It is intended for an uninterrupted supply of alarm system devices requiring stabilized voltage of 12 V DC (+/-15%). Alinear stabilizing system, which has been used in the unit, provides voltage with a lower level of noise and a quicker response to interference when compared to a switched-mode regulator Power supply: 230VAC/50Hz. Power supply output: (1) 2A/13,8VDC – for general application (2) 1,1A/13,8VDC – for grade 1, 2. Battery charging current: 0,4A/0,9A. Fitting battery: 17Ah/12V. Current consumption by PSU systems: 15 mA max. Protections: SCP, OLP, OVP, UVP, tamper (opening of the enclosure). Technical outputs OC type: EPS – 230V power failure AC, PSU – power supply failure, APS – battery failure. Compliance with the standards: EN50131-6. Dimensions: W=230 H=300 D+D1=82+8 mm [+/- 2mm]. Surface mounted enclosure, locking – bolted.

External Power Source for Turnstiles with operating unit MT - Indoor installation. 230VAC/12VDC, 3A. Operating temperature: -30°… +50°C.

The buffer power supply is designed in accordance with the requirements of the EN 50131-6 standard, grade 1÷2 and II environmental class. It is intended for an uninterrupted supply of alarm system devices requiring stabilized voltage of 24V DC (+/-15%). A linear stabilizing system, which has been used in the unit, provides voltage with a lower level of noise and a quicker response to interference when compared to a switched-mode regulator. Power supply: 230VAC/50Hz. Power supply output: (1) 2A/27,6VDC - for general application (2) 0,58A/27,6VDC - for grade 1, 2. Battery charging current: 0,4A. Fitting battery: 2x7Ah/12V. Current consumption by PSU systems: 15 mA max. Protections: SCP, OLP, OVP, UVP, tamper (opening of the enclosure). Technical outputs OC type: EPS - 230V power failure AC, PSU - power supply failure, APS – battery failure. Compliance with the standards: EN50131-6. Dimensions: W=230 H=300 D+D1=92+8 mm [+/- 2mm]. Surface mounted enclosure, locking – bolted.

To complement the range of low profile 12V CCTV power supplies, ELMDEME has just introduced an even smaller version! This 4A unit comes with 4 individually fused output circuits. It has all the features of the larger versions but measures just 185 x 200 x 60mm. Voltage range: 12 V, 4 A. IP65.

The GEN Switch Mode range of power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing Intruder Alarm Systems to grade 2 and 3 under PD6662:2010 / EN50131-6:2008, with built in quality and reliability. Both grades of product are available in two power variants with a range of enclosure sizes providing the required space for the standby battery. Two LED’s assist with quick and easy installation by showing presence of mains, correct battery charging or a fault condition, whilst fault outputs are available to relay this information back to the intruder panel. Each PSU incorporates intelligent battery management comprising of full load battery testing, low battery voltage detection and deep discharge protection. PSU protection is builit-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs. Voltage range: 12 V, 1,5+0,8 A. GRADE 2.

The GEN Switch Mode range of power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing Intruder Alarm Systems to grade 2 and 3 under PD6662:2010 / EN50131-6:2008, with built in quality and reliability. Both grades of product are available in two power variants with a range of enclosure sizes providing the required space for the standby battery. Two LED’s assist with quick and easy installation by showing presence of mains, correct battery charging or a fault condition, whilst fault outputs are available to relay this information back to the intruder panel. Each PSU incorporates intelligent battery management comprising of full load battery testing, low battery voltage detection and deep discharge protection. PSU protection is builit-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs. Voltage range: 12 V, 1+0,6 A. GRADE 2.

The GEN Switch Mode range of power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing Intruder Alarm Systems to grade 2 and 3 under PD6662:2010 / EN50131-6:2008, with built in quality and reliability. Both grades of product are available in two power variants with a range of enclosure sizes providing the required space for the standby battery. Two LED’s assist with quick and easy installation by showing presence of mains, correct battery charging or a fault condition, whilst fault outputs are available to relay this information back to the intruder panel. Each PSU incorporates intelligent battery management comprising of full load battery testing, low battery voltage detection and deep discharge protection. PSU protection is builit-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs. Voltage range: 12 V, 1,5+0,8 A. GRADE 3.