English
Español
  • Search
    • +34 902930427

    0.00 €

    Fire Detectors

    Products 623
    UTC™ Analogical Control Unit for Sensor Cable [AACUSP]
    UTC™ Analogical Control Unit for Sensor Cable
    Ref.: AACUSP
    Control unit to configure analogical sensor cables. Allows to monitor and configure the cable temperature ranges of AA family. Establish two temperature parameters: Pre-alarm and alarm. Configurable directly through the control unit.
    V.A.T. included
    1,946.85 €
    UTC™ Aritech™ Wireless Temperature (80º C) Detector [FCX-176-001]
    UTC™ Aritech™ Wireless Temperature (80º C) Detector
    Ref.: FCX-176-001
    Analog temperature detector to be used with a radio base for Aritech analog control panels, trigger temperature 80ºC, class CS. Includes base and batteries. Frequency 868Mhz. It is powered by batteries. Dimensions: 113x81 mm. CE and CPR certificates (EN54 parts 5 and 25).
    V.A.T. included
    60.94 €
    UTC™ Aritech™ Wireless Optical Detector [FCX-177-001]
    UTC™ Aritech™ Wireless Optical Detector
    Ref.: FCX-177-001
    Analog optical smoke detector to be used with radio base for Aritech analog control panels. Selectable sensitivity. It is powered by batteries. IP23. Dimensions: 113x81 mm including base. Certificates: CE and CPR (EN54 parts 7 and 25).
    V.A.T. included
    61.54 €
    UTC™ Aritech™ Wireless Thermovelocimetric Detector [FCX-175-001]
    UTC™ Aritech™ Wireless Thermovelocimetric Detector
    Ref.: FCX-175-001
    Analog thermovelocimetric detector to be used with a radio base for Aritech analogue control panels, adjustable trigger temperature 57ºC, class A1R. Includes base and battery. Dimensions: 113x81 mm. Certificates: CE and CPR (EN54 parts 5 and 25).
    V.A.T. included
    60.94 €
    Base for UTC™ Aritech™ Wireless Detectors [FCX-170-001]
    Base for UTC™ Aritech™ Wireless Detectors
    Ref.: FCX-170-001
    Radio detector base for Fusion detection devices for Aritech analog control panels. Frequency 868Mhz. IP23. It is powered by 6 AA batteries. Certificates: CE and CPR (EN54 part 25).
    V.A.T. included
    200.16 €
    UTC™ Carbon Monoxide Detectors 300 Serie [KMD300]
    UTC™ Carbon Monoxide Detectors 300 Serie
    Ref.: KMD300
    Carbon monoxide detector of low consumption and ultrafast response Includes connection socket. Diagnostic LED.IP42. Dimensions: 124x62mm (with base). Certified, in accordance to UNE 23-301-88, CE, WEEE and RoHS standards.
    V.A.T. included
    99.95 €
    UTC™ Protection Cover For FDD710 [FDD710E]
    UTC™ Protection Cover For FDD710
    Ref.: FDD710E
    In applications where the FDD710 needs to be installed in cold attics or outdoor, condensation could be a problem. To avoid the formation of condensation, the use FDD710E protection cover is recommended.
    V.A.T. included
    458.78 €
    UTC™ Mounting Bracket For FDD710, Irregular Duct Shapes [FDD710MB]
    UTC™ Mounting Bracket For FDD710, Irregular Duct Shapes
    Ref.: FDD710MB
    The FDD710MB allows the FDD710 duct detector to be mounted on irregular shaped or circular ducts. Four tabs are easily bent to adapt to the shape of the duct. The FDD710 then mounts on the flat surface.
    V.A.T. included
    53.49 €
    UTC™ Universal Air Sampling Unit [FDD710]
    UTC™ Universal Air Sampling Unit
    Ref.: FDD710
    Camera for detector installations in ventilation ducts. Compatible with conventional and analogical UTC™ Fire & Security detectors. IP54. Detector and socket not included. Length of the sampling pipe: 600mm. Dimensions: 180x253x183mm.
    V.A.T. included
    206.40 €
    UTC™ Extension Pipe For FDD710, 1.5 m [FDD710LP]
    UTC™ Extension Pipe For FDD710, 1.5 m
    Ref.: FDD710LP
    The 1.5m extra-long sampling pipe is used with the FDD710 duct detector. It allows sampling in ducts that are too large for the 600mm sampling pipe normally supplied. The pipe may be cut to get an exact fit into the duct.
    V.A.T. included
    69.35 €
    UTC™ Aritech™ Apollo Series 65 Conventional Optical Detector [DP652L]
    UTC™ Aritech™ Apollo Series 65 Conventional Optical Detector
    Ref.: DP652L
    The detector sensor consists of 2 cambers - an open outer chamber and a semi-sealed reference chamber. As smoke enters the open chamber, the voltage difference between the chambers is measured and compared to a pre-set trigger level for alarm. An integrating ionisation detector, suitable for use in areas where transient levels of smoke may be present, is also available.
    V.A.T. included
    59.56 €
    UTC™ Aritech™ Apollo Series 65 Conventional Optical Detector [DP652]
    UTC™ Aritech™ Apollo Series 65 Conventional Optical Detector
    Ref.: DP652
    The detector sensor consists of 2 cambers - an open outer chamber and a semi-sealed reference chamber. As smoke enters the open chamber, the voltage difference between the chambers is measured and compared to a pre-set trigger level for alarm. An integrating ionisation detector, suitable for use in areas where transient levels of smoke may be present, is also available.
    V.A.T. included
    49.57 €
    UTC™ Aritech™ Surface Mount Conduit Box For Fire Detector Bases [DB806]
    UTC™ Aritech™ Surface Mount Conduit Box For Fire Detector Bases
    Ref.: DB806
    The DB806 is a versatile accessory for surface mounting fire detector bases. It was specifically designed to be used with 600, 860, 900 and 2000 series detectors, but may be used with most industry standard fire detector bases.
    V.A.T. included
    6.20 €
    UTC™ Aritech™ 700 Series Conventional Multi Detector w/ Relay Output [DP721RT]
    UTC™ Aritech™ 700 Series Conventional Multi Detector w/ Relay Output
    Ref.: DP721RT
    All Aritech 700 series smoke detectors continuously monitor their sensitivity and operational status. Background drift is daily compensated to maintain the original calibrated sensitivity within the required limits. Once a day the detector performs a full diagnostic test that includes dynamically testing the sensing chamber and internal electronics. If a detector drifts out of sensitivity range or fails the internal diagnostics test, this is reported back to the panel and indicated on the detector with a yellow fault LED.
    V.A.T. included
    76.50 €
    UTC™ Aritech™ 700 Series Conventional Multi Detector w/ Remote Indicator Output [DP721T]
    UTC™ Aritech™ 700 Series Conventional Multi Detector w/ Remote Indicator Output
    Ref.: DP721T
    All Aritech 700 series smoke detectors continuously monitor their sensitivity and operational status. Background drift is daily compensated to maintain the original calibrated sensitivity within the required limits. Once a day the detector performs a full diagnostic test that includes dynamically testing the sensing chamber and internal electronics. If a detector drifts out of sensitivity range or fails the internal diagnostics test, this is reported back to the panel and indicated on the detector with a yellow fault LED.
    V.A.T. included
    61.94 €
    UTC™ Aritech™ 700 Series Conventional Heat Detector, 70°C Class B [DT713-7]
    UTC™ Aritech™ 700 Series Conventional Heat Detector, 70°C Class B
    Ref.: DT713-7
    The 700 series conventional detector line includes a range of temperature detectors: The DT713-5 is a class A2 temperature detector with a fixed temperature threshold of 57°C and built in rate-or-rise functionality. Automatic self diagnostics: Dynamic full detector and sensitivity test. High false alarm immunity. Built-in relay option. Separate fire and fault LED. 12 - 24 VDC operation. Polarity insensitive. Part of a full range: optical, heat and optical/heat multi criteria detectors. EN54 approved and CPR certified. The DT713-7 is a class B temperature detector with a fix temperature threshold of 70°C and built in rate-or-rise functionality.
    V.A.T. included
    51.45 €
    Base for Intrinstically Safe Detectors [YBN-R/4IS(WHT)]
    Base for Intrinstically Safe Detectors
    Ref.: YBN-R/4IS(WHT)
    The YBN-R/4IS(WHT) is a WHITE conventional detector mounting base associated with the conventional range of intrinsically safe detectors which is fully compatible with the majority of existing conventional fire alarm control panels. The YBN-R/4IS(WHT) is supplied with square cable clamps for secure and reliable cable termination. Note that this base does not provide line continuity during detector removal (head out support). If manual call points are therefore being used, then these should be wired onto the zone first.
    V.A.T. included
    24.31 €
    UTC™ High Temperature Thermal Probe [ST802]
    UTC™ High Temperature Thermal Probe
    Ref.: ST802
    High temperature thermic detector by thermal probe with electrical interlock, adjustable temperature from 50 to 300ºC, Dimensions: 140 x 100 x 70 mm, grey color. Can be connected directly to any UTC fire detection central and automatical reset.
    V.A.T. included
    182.25 €
    UTC™ High Temperature Thermal Probe [ST801]
    UTC™ High Temperature Thermal Probe
    Ref.: ST801
    High temperature thermic detector by thermal probe with electrical interlock, adjustable temperature from 50 to 300ºC, Dimensions: 140 x 100 x 70 mm, grey color. Can be connected directly to any UTC fire detection central.
    V.A.T. included
    189.01 €
    KILSEN® Intrinsically Safe Conventional Smoke Detector [SLR-E-IS(WHT)]
    KILSEN® Intrinsically Safe Conventional Smoke Detector
    Ref.: SLR-E-IS(WHT)
    Conventional intrinsically safe smoke detector. Requires YBN-R/4IS(WHT) base. Certified DoP and CE.
    V.A.T. included
    194.88 €
    KILSEN® Fire Detection Conventional Base with Relay [KZ705R]
    KILSEN® Fire Detection Conventional Base with Relay
    Ref.: KZ705R
    Connection base with a relay output for all KL700 range detectors, includes anti-theft head system, stainless steel contacts, ground contact for screen connection, ABS material in white color.
    V.A.T. included
    27.08 €
    KILSEN® Thermovelocimetric Detector [KL710]
    KILSEN® Thermovelocimetric Detector
    Ref.: KL710
    Conventional thermovelocimetric detector, double LED indicator with total vision and a output for remote controller, anti-theft head system and stainless steel contacts. Requires KZ700 base, not included. Certified: CE and CPR (EN54 part 5).
    V.A.T. included
    19.88 €
    Connection Base for All KILSEN® 700 Series Detectors - Black [KZ700B]
    Connection Base for All KILSEN® 700 Series Detectors - Black
    Ref.: KZ700B
    Connection base for all KL700 and KL700A range detectors, includes anti-theft head system, stainless metal contact. Irregular roof fixing system, low perfil, ABS material in white color.
    V.A.T. included
    7.20 €
    Connection Base for All KILSEN® 700 Series Detectors [KZ700]
    Connection Base for All KILSEN® 700 Series Detectors
    Ref.: KZ700
    Connection base for all KL700 and KL700A range detectors, includes anti-theft head system, stainless metal contact. Irregular roof fixing system, low perfil, ABS material in white color.
    V.A.T. included
    4.74 €
    SYSAWAY© 2024 All rights reserved