English
Español
  • Search
    • +34 902930427

    0.00 €

    Fire Detectors

    Products 623
    Surface Supplement [AE/SA-ZS]
    Surface Supplement
    Ref.: AE/SA-ZS
    Mounting supplement for tubes. Easy to install allowing th input of 3 tubes of 20mm. Compatible with all algorithmic detectors. Made in ABS.
    V.A.T. included
    Consult
    AGUILERA™ Thermovelocimetric Detector [AE/SA-T]
    AGUILERA™ Thermovelocimetric Detector
    Ref.: AE/SA-T
    Heat detector made by AGUILERA™ ELECTRÓNICA in accordance with UNE EN54-5 standard with CE certificate of conformity and AENOR quality mark. addressable algorithmic unit thant manage two temperature parameters: Differential and thermal. Both measure are analized and send to the central to take a alarm decision with the setting made in each case.
    V.A.T. included
    Consult
    AGUILERA™ Optical-Thermal Detector [AE/SA-OPT]
    AGUILERA™ Optical-Thermal Detector
    Ref.: AE/SA-OPT
    Multisensor detector with double technology, of smoke and heat, made by AGUILERA™ ELECTRÓNICA according to UNE EN 54-7 and UNE EN 54-5 standards with CE certificate of conformity and AENOR quality mark. addressable algorithmic unit that manage a optic smoke sensor and other of heat. The optic sensor take light measure that disperse smoke particles and its raise. All measurements are analized and sended to the central to take a alarm decision that always reaches the programmated parameters. Possess the same features than AE/SA-OP detector.
    V.A.T. included
    Consult
    AGUILERA™ Low Profile Optic Detector [AE/SA-OPI]
    AGUILERA™ Low Profile Optic Detector
    Ref.: AE/SA-OPI
    Features that give the distinction between the rest of optic detectors are its design and its dimensions. The AE/SA-OPI has a lower perfil, only 43mm high, that permit to be fixed closer to the roof. CE certificate of conformity according EN54-7 standard.
    V.A.T. included
    Consult
    AGUILERA™ Optic Detector with Alarm Acoustic Warning [AE/SA-OPZ]
    AGUILERA™ Optic Detector with Alarm Acoustic Warning
    Ref.: AE/SA-OPZ
    Smoke detector made by AGUILERA™ ELECTRÓNICA according to UNE EN 54-7 standards, with CE certificate of conformity and AENOR quality mark. addressable algorithmic unit that manage a optical smoke sensor. Its function is to tke light measures that disperse smoke particles, assess the density and the rate of increase in the time and to send an information to the analized central to take an alame decision when it reach the set parameters. Includes a audible warning that activate in case of alarm the smoke detector or if it has been programmated in the central, with any alarm device in its zone. Sound intensity 85dB. Maximum consumption in alarm 13mA.
    V.A.T. included
    Consult
    AGUILERA™ Optic Detector [AE/SA-OP]
    AGUILERA™ Optic Detector
    Ref.: AE/SA-OP
    Smoke detector made by AGUILERA™ ELECTRÓNICA according to UNE EN 54-7 standards, with CE certificate of conformity and AENOR quality mark. addressable algorithmic unit that manage a optical smoke sensor. Its function is to tke light measures that disperse smoke particles, assess the density and the rate of increase in the time and to send an information to the analized central to take an alame decision when it reach the set parameters.
    V.A.T. included
    Consult
    XTRALIS™ Linear Smoke Detector Test Station [RTS151KIT]
    XTRALIS™ Linear Smoke Detector Test Station
    Ref.: RTS151KIT
    Test station with key and status indicator, surface mounted for linear smoke detectors NFXI-BEAM-T, 6500RS or OSID. Includes RTS151KEY test unit and WM2348E surface base. Requires 24 VDC External Power on the Linear detector. It requires 5 connection wires between the test station and detector.
    V.A.T. included
    Consult
    Key Test Station for XTRALIS™ Linear Smoke Detectors [RTS151KEY]
    Key Test Station for XTRALIS™ Linear Smoke Detectors
    Ref.: RTS151KEY
    Test station with key and status indicator, surface mounted for linear smoke detectors NFXI-BEAM-T, 6500RS or OSID. For recessed mounting. Requires 24 VDC External Power on the Linear detector. It requires 5 connection wires between the test station and detector.
    V.A.T. included
    Consult
    IP Box for XTRALIS™ OSID Transmitter [OSID-EHE]
    IP Box for XTRALIS™ OSID Transmitter
    Ref.: OSID-EHE
    IP66 protection box for OSID transmitter
    V.A.T. included
    Consult
    Replacement Battery for XTRALIS™ OSID Transmitters OSE-xP-01 [OSE-RBA]
    Replacement Battery for XTRALIS™ OSID Transmitters OSE-xP-01
    Ref.: OSE-RBA
    Replacement alkaline battery for OSE-SP-01 and OSE-HP-01 emitters.
    V.A.T. included
    Consult
    IP Box for XTRALIS™ OSID Receiver [OSID-EHI]
    IP Box for XTRALIS™ OSID Receiver
    Ref.: OSID-EHI
    IP66 protection box for OSID receiver.
    V.A.T. included
    Consult
    Test Filter for XTRALIS™ OSID (10 Units) [OSP-003]
    Test Filter for XTRALIS™ OSID (10 Units)
    Ref.: OSP-003
    Test filter for OSID - 10 Units
    V.A.T. included
    Consult
    XTRALIS™ Test Filter (Pack 200 Units) [OSP-003-200]
    XTRALIS™ Test Filter (Pack 200 Units)
    Ref.: OSP-003-200
    Test filter for OSID - 200 Units
    V.A.T. included
    Consult
    XTRALIS™ Protective Grid [OSID-WG]
    XTRALIS™ Protective Grid
    Ref.: OSID-WG
    Metal protection grid for OSID transmitter/receiver.
    V.A.T. included
    Consult
    XTRALIS™ OSID Installation Kit [OSID-INST]
    XTRALIS™ OSID Installation Kit
    Ref.: OSID-INST
    OSID installation KIT with laser tool, diagnostic cable and test filter.
    V.A.T. included
    Consult
    XTRALIS™ PC Connection Cable [OSP-001]
    XTRALIS™ PC Connection Cable
    Ref.: OSP-001
    Diagnostic USB FTDI cable for 1.5m OSID receiver.
    V.A.T. included
    Consult
    XTRALIS™ High Power OSID Transmitter with Battery [OSE-HP-01]
    XTRALIS™ High Power OSID Transmitter with Battery
    Ref.: OSE-HP-01
    High power emitting device with battery power for operation with OSI-90. Compatible with OSI-90. Approximately 3 years of useful life.
    V.A.T. included
    Consult
    Standard XTRALIS™ OSID transmitter with battery [OSE-SP-01]
    Standard XTRALIS™ OSID transmitter with battery
    Ref.: OSE-SP-01
    Standard power emitting device with battery power for operation with OSI-10 and OSI-90. Compatible with OSI-10 or OSI-90. Approximately 5 years of useful life.
    V.A.T. included
    Consult
    XTRALIS™ OSID High Power Transmitter Powered at 24VDC [OSE-HPW]
    XTRALIS™ OSID High Power Transmitter Powered at 24VDC
    Ref.: OSE-HPW
    High power emitting device with wired power for operation with OSI-90. Requires 12/24VDC power from a power source conforming to EN54/4. Compatible with OSI-90. Operating voltage 20 to 30 VDC. Current consumption @ 24 VDC approx. 800µA. Operating temperature: -10° C to 55° C. Relative humidity: 10 to 95% (not condensed). Dimensions. A: 136mm H: 208mm F: 96mm.
    V.A.T. included
    Consult
    Standard XTRALIS™ OSID transmitter Powered at 24VDC [OSE-SPW]
    Standard XTRALIS™ OSID transmitter Powered at 24VDC
    Ref.: OSE-SPW
    Standard power emitting device with wired power for operation with OSI-10 and OSI-90. Requires 12/24VDC power from a power source conforming to EN54/4. Compatible with OSI-10 or OSI-90.
    V.A.T. included
    Consult
    XTRALIS™ Linear OSID Receiver with 80° Field of View [OSI-90]
    XTRALIS™ Linear OSID Receiver with 80° Field of View
    Ref.: OSI-90
    80° OSID receiver for up to 7 transmitters and distances of 6m to 36m using standard power transmitters and 12m to 68m with high power transmitters OSE-HPW or 50m with OSE-HP-01. Requires 12/24VDC power from a power source conforming to EN54/4.
    V.A.T. included
    Consult
    XTRALIS™ Linear OSID Receiver with 7° Field of View [OSI-10]
    XTRALIS™ Linear OSID Receiver with 7° Field of View
    Ref.: OSI-10
    OSID receiver 7° coverage of 30m up to 150m range. Compatible with OSE-SPW and OSE-SP-01 Distance from 30 to 150 m with OSE-SP-01/W. Requires 12/24VDC power from a power source conforming to EN54/4.
    V.A.T. included
    Consult
    HONEYWELL™ FSL Detector Test Lamp - Unclassified [FSL100-TL]
    HONEYWELL™ FSL Detector Test Lamp - Unclassified
    Ref.: FSL100-TL
    Test lamp for FSL detectors, includes universal charger and carrying case. For unclassified areas.
    V.A.T. included
    Consult
    Support for HONEYWELL™ FSL Detectors [FSL100-SM21]
    Support for HONEYWELL™ FSL Detectors
    Ref.: FSL100-SM21
    Ball joint mount for mounting FSL detectors.
    V.A.T. included
    Consult
    SYSAWAY© 2025 All rights reserved