English
Español
  • Search
  • 0.00 €

    Fire

    Products 2730
    • Access Control Readers
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    KILSEN® Conventional Pilot with Red Flash for Roof [FAC350]
    KILSEN® Conventional Pilot with Red Flash for Roof
    Ref.: FAC350
    High resistance strobe pilot at 24Vcc for indoor ceiling. Red flash and base. IP21. Dimensions: 100Øx81mm. Operating temperature: -25ºC to 70ºC. Certificates: CE and CPR (EN54 part 23).
    V.A.T. included
    86.89 €
    KILSEN® Action Indicator Pilot for PCI [PA25/3L]
    KILSEN® Action Indicator Pilot for PCI
    Ref.: PA25/3L
    Action indicator pilot, very low consumption and high brightness, for direct connection to a fire detector with three signalling LEDs. Dimensions: 80x80x42mm. Operating temperature: -10ºC to 60ºC.
    V.A.T. included
    14.29 €
    LED Strobe Light, Intrinsically Safe with Red Lens [FA370]
    LED Strobe Light, Intrinsically Safe with Red Lens
    Ref.: FA370
    Pilot intrinsically safe at 24Vcc/48mA. Red glass and base. IP65. Dimensions: 89x85mm. Certificates: CE and CPR (EN54 part 3).
    V.A.T. included
    1,012.31 €
    UTC™ GST® Intelligent Addr. Remote Indicator [ I-9314]
    UTC™ GST® Intelligent Addr. Remote Indicator
    Ref.: I-9314
    I-9314 intelligent door lamp is used to display the alarms of indoor detectors. It is usually installed on sites easy to view, such as above the door of meeting room, dining room and bedroom. When the indoor detector alarms, the LED on the lamp will flash so that personnel can know the detector has been triggered alarm without entering the room.
    V.A.T. included
    69.90 €
    Flash Inteligente Direccionable UTC™ GST® [I-9314]
    Flash Inteligente Direccionable UTC™ GST®
    Ref.: I-9314
    I-9314 Intelligent Door Lamp is used to display the alarms of indoor detectors. It is usually installed on sites easy to view, such as above the door of meeting room, dining room and bedroom. When the indoor detector alarms, the LED on the lamp will flash so that personnel can know the detector has been triggered alarm without entering the room.
    V.A.T. included
    69.90 €
    UTC™ GST® Remote Indicator [C-9314P]
    UTC™ GST® Remote Indicator
    Ref.: C-9314P
    The C-9314P Remote Indicator is used to display an alarm from a detector. Suitable applications include when a detector is installed inside a room, false ceiling or an under floor cable space. When the detector issues an alarm, the LED on the lamp will light indicating where the detector was triggered.
    V.A.T. included
    16.25 €
    KILSEN® Luminous Warning Signboard - Spanish Version [GRP26-09]
    KILSEN® Luminous Warning Signboard - Spanish Version
    Ref.: GRP26-09
    Luminous signboard with LEDs technology at 24VDC and consumption of 70mA. Buzzer of 90dB. Made in plastic box, provided with 3 differents signs "EVACUATE IMMEDIATELY THE AREA", "FIRE ALARM" and "EXTINGUISHING IN PROCESS". IP41C. Dimensions: 305x115x40mm. Operating temperature: -10ºC to 55ºC. Certificate: EN54-3.
    V.A.T. included
    132.05 €
    KILSEN® Luminous Warning Signboard - French Version [GRP26-02]
    KILSEN® Luminous Warning Signboard - French Version
    Ref.: GRP26-02
    Luminous signboard with LEDs technology at 24VDC and consumption of 70mA. Buzzer of 90dB. Made in plastic box, provided with 3 differents signs "EVACUATE IMMEDIATELY THE AREA", "FIRE ALARM" and "EXTINGUISHING IN PROCESS". IP41C. Dimensions: 305x115x40mm. Operating temperature: -10ºC to 55ºC. Certificate: EN54-3.
    V.A.T. included
    132.05 €
    UTC™ GST® Conventional Base Mount Sounder (24VDC) [C-9402]
    UTC™ GST® Conventional Base Mount Sounder (24VDC)
    Ref.: C-9402
    C-9402 Conventional Base Mount Sounder (the sounder) is an audible signal appliance in field, used together with I-9308 module. When there is a fire, the sounder gives alarming sound to warn people.
    V.A.T. included
    Consult
    UTC™ GST® Gas Extinguishing Warning Indicator [C-9318]
    UTC™ GST® Gas Extinguishing Warning Indicator
    Ref.: C-9318
    C-9318 Gas Extinguishing Warning Indicator (hereinafter called the indicator) is the accessory equipment of a gas extinguishing system. It's usually installed at the entrance of the protected area. After gas is released, the control panel will activate the indicator to give visual indication warning people in field to take relative measures. This indicator is non-addressable and is used together with GST303/GST306 extinguishing control panel.
    V.A.T. included
    77.68 €
    UTC™ GST® Deep Base for Surface Cable Entry [C-94DB]
    UTC™ GST® Deep Base for Surface Cable Entry
    Ref.: C-94DB
    Deep Base for surface mounting the GST souun nder and Sounder/beacon (addressable I-9403,I-9404and I-9407, CCo onventional C-9403 and C-9404).
    V.A.T. included
    14.56 €
    UTC™ GST® Conventional Sounder - 2 Tones [C-9404]
    UTC™ GST® Conventional Sounder - 2 Tones
    Ref.: C-9404
    C-9404 Conventional Sounder is an audible alarm device used to warn people in field when fire occurs. It can give audible alarm signal when applied to external 24VDC power (D1 connected with positive and D2 with negative). A 25.5mm high shallow base and a 40mm high deep base are available.
    V.A.T. included
    50.13 €
    UTC™ GST® Conventional Sounder with Visible Indicator [C-9403]
    UTC™ GST® Conventional Sounder with Visible Indicator
    Ref.: C-9403
    C-9403 Conventional Sounder Strobe is an audible and visible alarm device used to warn people in field when fire occurs. It can give audible and visible alarm signal when applied to external 24VDC power (D1 connected with positive and D2 with negative). A 25.5mm high shallow base and a 40mm high deep base are available.
    V.A.T. included
    117.10 €
    UTC™ Aritech™ Apollo® XPander Wireless Sounder With Base (White) [AS933RRF]
    UTC™ Aritech™ Apollo® XPander Wireless Sounder With Base (White)
    Ref.: AS933RRF
    The AS933RRF is a RED, wireless addressable fire alarm sounder including a wireless base and batteries. This 32 tone sounder is suitable for indoor use and connects to an addressable 950 series complaint panel by means of a wireless interface unit.
    V.A.T. included
    Consult
    UTC™ Aritech™ 2000 Series Loop Powered Sounder, Multi-Tone, Deep Base - (WHITE) [AS2364W]
    UTC™ Aritech™ 2000 Series Loop Powered Sounder, Multi-Tone, Deep Base - (WHITE)
    Ref.: AS2364W
    The AS2364W is a WHITE bodied, deep base addressable room sounder for fire alarm systems running 2000 series addressable fire protocol. Multiple tone selection and full CPD approval ensure conformance to local regulations. The sounders operate over a 2-wire 2000 series loop and are loop powered i.e. no external power supply is required. They are compatible with automatic phased-start synchronisation controlled from the fire panel. The AS2364W has a IP65 enclosure.
    V.A.T. included
    157.83 €
    UTC™ Aritech™ Apollo® XP95 Loop Powered Open-Area Sounder (Red) With Isolator [AS964I]
    UTC™ Aritech™ Apollo® XP95 Loop Powered Open-Area Sounder (Red) With Isolator
    Ref.: AS964I
    The AS964I is a 950 series, intelligent loop powered open-area sounder in RED with a built in isolator. It is designed for use in indoor and outdoor open area applications. It supports 3 tones with two volume settings. A locking mechanism is available to prevent unauthorized removal of the AS964I from its base.
    V.A.T. included
    157.83 €
    UTC™ Aritech™ 2000 Series Loop Powered Sounder, Multi-Tone, Shallow Base [AS2363]
    UTC™ Aritech™ 2000 Series Loop Powered Sounder, Multi-Tone, Shallow Base
    Ref.: AS2363
    The AS2363 is a RED bodied, shallow base addressable room sounder for fire alarm systems running 2000 series addressable fire protocol. Multiple tone selection and full CPD approval ensure conformance to local regulations. The sounders operate over a 2-wire 2000 series loop and are loop powered i.e. no external power supply is required. They are compatible with automatic phased-start synchronisation controlled from the fire panel.
    V.A.T. included
    126.08 €
    UTC™ Aritech™ Apollo® XPander Wireless Sounder with Base (White) [AS933WRF]
    UTC™ Aritech™ Apollo® XPander Wireless Sounder with Base (White)
    Ref.: AS933WRF
    The AS933WRF is a WHITE, wireless addressable fire alarm sounder including a wireless base and batteries. This 32 tone sounder is suitable for indoor use only and connects to an addressable 950 series complaint panel by means of a wireless interface unit.
    V.A.T. included
    596.58 €
    UTC™ Aritech™ 2000 Series Loop Powered Sounder, Multi-Tone, Deep Base [AS2364]
    UTC™ Aritech™ 2000 Series Loop Powered Sounder, Multi-Tone, Deep Base
    Ref.: AS2364
    The AS2364 is a RED bodied, deep base addressable room sounder for fire alarm systems running 2000 series addressable fire protocol. Multiple tone selection and full CPD approval ensure conformance to local regulations. The sounders operate over a 2-wire 2000 series loop and are loop powered i.e. no external power supply is required. They are compatible with automatic phased-start synchronisation controlled from the fire panel. The AS2364 has a IP65 enclosure.
    V.A.T. included
    157.83 €
    UTC™ Aritech™ 2000 Series Loop Powered Sounder, Multi-Tone, Shallow Base - (WHITE) [AS2363W]
    UTC™ Aritech™ 2000 Series Loop Powered Sounder, Multi-Tone, Shallow Base - (WHITE)
    Ref.: AS2363W
    The AS2363W is a WHITE bodied, addressable room sounder for fire alarm systems running 2000 series addressable fire protocol. Multiple tone selection and full CPD approval ensure conformance to local regulations. The sounders operate over a 2-wire 2000 series loop and are loop powered i.e. no external power supply is required. They are compatible with automatic phased-start synchronisation controlled from the fire panel.
    V.A.T. included
    126.08 €
    SYSAWAY© 2024 All rights reserved