English
Español
  • Search
    • +34 902930427

    0.00 €

    Fire

    Products 2730
    • Access Control Readers
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    UTC™ Resettable Element For Manual Call Point [ DMN800]
    UTC™ Resettable Element For Manual Call Point
    Ref.: DMN800
    The DMN800 is a resettable, plastic replacement element manual call points. It replaces the standard manual call point glass, allowing the manual call point to be acivated and reset (using the standard test key), without the need to replace the glass afterward.
    V.A.T. included
    2.83 €
    UTC™ EN54 Universal MCP Glass (Without Branding) - Pack 10 Pcs. [DM715]
    UTC™ EN54 Universal MCP Glass (Without Branding) - Pack 10 Pcs.
    Ref.: DM715
    Replacement glass. Provided in 10 units pack. The DM715 is an universal EN54 approved glass for the 700 Series as well as the DM2000 and KAL450 series manual call points. Plastic coated to prevent operator injury. No glass fragments on breaking. No hammer required. Approved EN54 part 11.
    V.A.T. included
    16.98 €
    KILSEN® Analogical Alarm Push Button [KAL455]
    KILSEN® Analogical Alarm Push Button
    Ref.: KAL455
    Directionable hand switch alarm, with LED status indicator and test key, connection through terminals, possibility of surface or flush mounting. Glass (DM715) and surface mounting accessory included, ABS material, red color. IP24. Dimensions: 89 x 9 3x 27.5 mm. Certified: CE and CPR (EN54 Part 11).
    V.A.T. included
    80.33 €
    KILSEN® Analogical Alarm Outdoor Push Button [KAL455E]
    KILSEN® Analogical Alarm Outdoor Push Button
    Ref.: KAL455E
    Directionable outdoor hand switch alarm, with LED status indicator and test key, connection through terminals for surface mounting. Glass (DM715) and surface mounting accessory included, ABS material, red color. IP67. Dimensions: 97.5 x 93 x 27.5 mm. Certified: CE and CPR (EN54 Part 11).
    V.A.T. included
    265.12 €
    UTC™ GST® Digital Manual Call Point [DI-9204E]
    UTC™ GST® Digital Manual Call Point
    Ref.: DI-9204E
    Connecting to the loop of GST fire alarm system, DI-9204 Digital Manual Call Point (the MCP) is suitable for public places. When there is fire, pressing the action plate on the MCP can send the alarm signal to fire alarm control panel. After receiving the signal, the control panel will show address information of the MCP and generate alarm sound.
    V.A.T. included
    83.45 €
    UTC™ GST® Weatherproof Box [D-92WPB]
    UTC™ GST® Weatherproof Box
    Ref.: D-92WPB
    Designed to protect manual call point from an accidental operation, outdoor solution and suitable for 92 MCP series. The D-92WPB constructed of high plastic quality with a modern pleasing appearance. Protection Rating: IP65. Cover seal: High performance EPDM gasket.
    V.A.T. included
    156.78 €
    UTC™ GST® Anti Tamper Security Cover [D-92FC]
    UTC™ GST® Anti Tamper Security Cover
    Ref.: D-92FC
    Designed to protect manual call point from an accidental operation and suitable for 92 MCP series. The D-92FC constructed of high plastic quality with a modern pleasing appearance.
    V.A.T. included
    5.13 €
    UTC™ GST® Addressable Gas Detector [I-9602LW-CG]
    UTC™ GST® Addressable Gas Detector
    Ref.: I-9602LW-CG
    I-9602LW Addressable Gas Detector is used to detect leakage of gas (LPG, Natural Gas or Coal Gas) in such areas as houses, hotels and apartments. Drift compensation, to suit environment changing extensively. Local buzzer alarm. Additional relay output for fan control and Valve shut off. Self-diagnostic. Electronically addressed, can be programmed by programmer.
    V.A.T. included
    237.80 €
    UTC™ GST® Addressable Gas Detector [C-9602LW-NG]
    UTC™ GST® Addressable Gas Detector
    Ref.: C-9602LW-NG
    I-9602LW addressable gas detector is used to detect leakage of gas (LPG, Natural Gas or Coal Gas) in such areas as houses, hotels and apartments. Cable connecting with Z1, Z2, V+, V- , K1 and K2 shall be 1.0mm2 or above flame-retardant copper-core.
    V.A.T. included
    114.21 €
    UTC™ GST® Addressable Gas Detector [I-9602LW-NG]
    UTC™ GST® Addressable Gas Detector
    Ref.: I-9602LW-NG
    I-9602LW Addressable Gas Detector is used to detect leakage of gas (LPG, Natural Gas or Coal Gas) in such areas as houses, hotels and apartments. Drift compensation, to suit environment changing extensively. Local buzzer alarm. Additional relay output for fan control and Valve shut off. Self-diagnostic. Electronically addressed, can be programmed by programmer.
    V.A.T. included
    177.33 €
    UTC™ GST® Addressable Gas Detector [I-9602LW-LPG]
    UTC™ GST® Addressable Gas Detector
    Ref.: I-9602LW-LPG
    I-9602LW Addressable Gas Detector is used to detect leakage of gas (LPG, Natural Gas or Coal Gas) in such areas as houses, hotels and apartments. Drift compensation, to suit environment changing extensively. Local buzzer alarm. Additional relay output for fan control and Valve shut off. Self-diagnostic. Electronically addressed, can be programmed by programmer.
    V.A.T. included
    177.33 €
    UTC™ GST® Addressable Gas Detector [C-9602LW-LPG]
    UTC™ GST® Addressable Gas Detector
    Ref.: C-9602LW-LPG
    I-9602LW addressable gas detector is used to detect leakage of gas (LPG, Natural Gas or Coal Gas) in such areas as houses, hotels and apartments. Cable connecting with Z1, Z2, V+, V- , K1 and K2 shall be 1.0mm2 or above flame-retardant copper-core.
    V.A.T. included
    117.10 €
    SENSITRON™ PATROL® CO (12/24VDC) Gas Detector [S2016CO]
    SENSITRON™ PATROL® CO (12/24VDC) Gas Detector
    Ref.: S2016CO
    Microprocessor based CO detector, with auto-zeroing procedure. It employs an electrochemical cell and provides an alarm intervention proportional to the CO contents. The unit comes complete with audible alarm and output relay. Power supply 12-24Vdc.
    V.A.T. included
    307.81 €
    SENSITRON™ PATROL® CO (220VAC) Gas Detector [S2015CO]
    SENSITRON™ PATROL® CO (220VAC) Gas Detector
    Ref.: S2015CO
    Microprocessor based CO detector, with auto-zeroing procedure. It employs an electrochemical cell and provides an alarm intervention proportional to the CO contents. The unit comes complete with audible alarm and output relay. Power supply 220Vac.
    V.A.T. included
    307.81 €
    SENSITRON™ PATROL® Methane, CH4 (220VAC) Gas Detector [S2013ME]
    SENSITRON™ PATROL® Methane, CH4 (220VAC) Gas Detector
    Ref.: S2013ME
    Microprocessor based flammable gas detector with auto-zeroing procedure. It employs a catalytic sensor calibrated to METHANE, with pre-alarm set at 5% LEL and alarm threshold set at 10% LEL, audible alarm and output relay. Power supply 12-24Vdc.
    V.A.T. included
    261.15 €
    SENSITRON™ PATROL® Methane, CH4 (12/24VDC) Gas Detector [S2014ME]
    SENSITRON™ PATROL® Methane, CH4 (12/24VDC) Gas Detector
    Ref.: S2014ME
    Microprocessor based flammable gas detector with auto-zeroing procedure. It employs a catalytic sensor calibrated to METHANE, with pre-alarm set at 5% LEL and alarm threshold set at 10% LEL, audible alarm and output relay. Power supply 220Vac.
    V.A.T. included
    261.15 €
    SENSITRON™ CO + Patrol Vapours EN50545-1 Gas Detector [S2400CO-VB]
    SENSITRON™ CO + Patrol Vapours EN50545-1 Gas Detector
    Ref.: S2400CO-VB
    CARBON MONOXIDE gas Detector (CO) 0-300 ppm. Electrochemical cell and PETROL VAPOURS. Detector 100% LEL Catalytic sensor - RS485 serial output - Dust Proof. Enclosure SMART P-2 for Car Parks. Designed to fulfil the new European Standard for gas detection in car parks, the SMART P-2 gas detectors offer the simultaneous detection of CO and NO2 or Petrol vapours integrated in the same detector. The SMART P-2 provide a serial RS485. To meet with the standard in full, these detectors are to be connected to MULTISCAN++PARK gas control panels.
    V.A.T. included
    806.99 €
    SENSITRON™ CO+NO2 EN50545-1 Gas Detector [S2400CO-ND]
    SENSITRON™ CO+NO2 EN50545-1 Gas Detector
    Ref.: S2400CO-ND
    CARBON MONOXIDE gas Detector (CO) 0-300 ppm and NITROGEN DIOXIDE gas Detector (NO2) 0-30 ppm - RS485 serial output - Electrochemical cell - Dust Proof Enclosure SMART P-2 for Car Parks. Designed to fulfil the new European Standard for gas detection in car parks, the SMART P-2 gas detectors offer the simultaneous detection of CO and NO2 or Petrol vapours integrated in the same detector. The SMART P-2 provide a serial RS485. To meet with the standard in full, these detectors are to be connected to MULTISCAN++PARK gas control panels.
    V.A.T. included
    768.58 €
    SENSITRON™ NO2 EN50545-1 Gas Detector [S2399ND]
    SENSITRON™ NO2 EN50545-1 Gas Detector
    Ref.: S2399ND
    NITROGEN DIOXIDE gas Detector (NO2) 0-30 ppm, RS485 serial output - Electrochemical cell - Dust Proof Enclosure SMART P-1 for Car Parks. Designed to fulfil the new European Standard for gas detection in car parks, the SMART P-1 gas detectors provide a serial RS485. The SMART P-1 employ electrochemical cells for the detection of CO or NO2. To meet with the standard in full, these detectors are to be connected to MULTISCAN++PARK gas control panels.
    V.A.T. included
    614.86 €
    SENSITRON™ CO EN50545-1 Gas Detector [S2398CO]
    SENSITRON™ CO EN50545-1 Gas Detector
    Ref.: S2398CO
    CARBON MONOXIDE gas Detector (CO) 0-300 ppm, RS485 serial output - Electrochemical cell - Dust Proof Enclosure SMART P-1 for Car Parks. Designed to fulfil the new European Standard for gas detection in car parks, the SMART P-1 gas detectors provide a serial RS485. The SMART P-1 employ electrochemical cells for the detection of CO or NO2. To meet with the standard in full, these detectors are to be connected to MULTISCAN++PARK gas control panels.
    V.A.T. included
    461.16 €
    SENSITRON™ Gas Detector for Carbon Dioxide SMART3 NC Series [S2401CO2]
    SENSITRON™ Gas Detector for Carbon Dioxide SMART3 NC Series
    Ref.: S2401CO2
    Detector designed to offer an economic product with professional services for unclassified areas. Use a infrared probe for CO2. Dispose of a standard output at 4-20mA and can dispose, in option of additional features for communications through RS485 or 3 output relays.
    V.A.T. included
    1,465.56 €
    SENSITRON™ Gas Detector for Carbon Monoxide SMART3 NC Series [S1450CO]
    SENSITRON™ Gas Detector for Carbon Monoxide SMART3 NC Series
    Ref.: S1450CO
    Detector designed to offer an economic product with professional services for unclassified areas. Use a electrochimic cell for CO. Dispose of a standard output at 4-20mA and can dispose, in option of additional features for communications through RS485 or 3 output relays.
    V.A.T. included
    547.30 €
    SENSITRON™ SMART3 GC2 Gas Detector for Methane [S2097ME]
    SENSITRON™ SMART3 GC2 Gas Detector for Methane
    Ref.: S2097ME
    Watertight gas detector without display. Aluminium. IP65. Dimensions: 130x155x90mm. For flammable gases, methane catalytic probe, 4-20mA, 0-100% LEL.
    V.A.T. included
    1,094.53 €
    SENSITRON™ SMART3 GC2 Gas Detector for Carbon Dioxide [S2131CO]
    SENSITRON™ SMART3 GC2 Gas Detector for Carbon Dioxide
    Ref.: S2131CO
    Watertight gas detector without display. Aluminium. IP65. Dimensions: 130x155x90mm. For toxic gases, carbone dioxide electrochemical probe, 0-5000ppm, 4-20mA. Probe type 3.
    V.A.T. included
    1,590.67 €
    SYSAWAY© 2024 All rights reserved