Capable of controlling eight FHSD8330 laser analysis cameras. It features a user interface consisting of a TFT color display, navigation buttons, and status LEDs. The configuration of this Standard Headend Module with display (and associated detector modules) can be done through the user interface, through a PC with remote software, or through SenseNET with an FHSD8320 Display Command Module. The TFT color display supports simple operations such as changing setting options through a menu-driven structure, but also advanced features such as viewing graphics recording in graphical format. The standard display header module has two USB ports, a master and a slave. The master is used to connect a pen-drive, which in turn can be used to store settings, event logs, or graphics recordings, or to update firmware. While the USB slave is used for connecting a PC. It requires a 24V (250mA) power supply. Dimensions: 110.5 x 113.5 x 300 mm. Certificates: CE and CPR (EN54-20).

Capable of controlling eight FHSD8330 laser analysis cameras. It has LED indicators for faults and Alarm, it also has relay or APIC outputs. Configurable through a PC with remote software or through SenseNET with an FHSD8320 Display Command Module. It requires a 24V (250mA) power supply. Dimensions: 110.5 x 113.5 x 300 mm. Certificates: CE and CPR (EN54-20).

Clamping plate for 1 reflector mirror (OR2000), with the option of adjustment to the assembly supplement FD-MB20.

Assembly supplement for infrared rays linear smoke detectors, to use with FD700, FD900, FD2700 y FDR-EZn series. Cn be mounted in vertical or horizontal position and allows an adjustment from 0 to 45ºC.

Reflector mirror for infrared beam reflection barriers.

Clamping plate for 4 reflector mirrors (OR2000), with the option of adjustment to the assembly supplement FD-MB20.

Assembly supplement for infrared rays linear smoke detectors, to use with FD800 serie and FD-MB30 y FD-MB40 supplements. Can be mounted in vertical or horizontal position and allows an adjustment from 0 to 45ºC.

Controller with an auto-adjustable infrared rays linear smoke detector with a maximum range of 50 x 8 metres. Possibility of connecting up to 2 detectors per controller. Power supply 24VDC. Maximum consumption: 36mA. Working temperature: -10ºC to 55ºC. IP54. Measures and weight of the detector: 135x135x135mm. and 0,5Kg. Measures and weight of the controller: 200x235x71mm.and 1Kg. Measures and weight of the reflector: 100x100x9,5mm and 0,07Kg. Certified: CE and CPR (EN54 part 12).

Linear smoke detector with infrared beam, by reflection of light in a mirror, with a maximum range from 50 to 100 x 15 metres. Requires external power supply (12 to 24 VDC), maximum consumption 15mA. Certified: CE, VDS and CPR (EN54 part 12).

Linear smoke detector with infrared beam, by reflection of light in a mirror, with a maximum range from 5 to 50 x 15 metres. Requires external power supply (12 to 24 VDC), maximum consumption 15mA. Certified: CE, VDS and CPR (EN54 part 12).

Linear infrared smoke detector, for Aritech™ analogic panels, powered by the loop, by reflection of light in a mirror, with a maximum coverage of 100 x 15 meters. CPD certificate according to standard EN54 part 12.

Linear infrared smoke detector, for Aritech™ analogic panels, supplied by the loop, by reflection of light in a mirror, with a maximum coverage of 50 x 15 meters. CPD certificate according to standard EN54 part 12.

The C-9104 Conventional Ultraviolet Flames Detector senses the ultraviolet (UV) rays emitted by a burning substance and is used in areas where you would expect heat and smoke that would leave the usual option of heat or smoke detectors ineffective, such as generator rooms. Requires DZ-03 or DZ-03D mounting base.

Dual-band infrared light detection for fire alarm. Sensitive to flame from material containing carbon. Suitable for fire starting from flame in large indoor or outdoor areas. Addressable (connecting fire alarm control panel) and non-addressable (through relay contact) working modes optional. Flame-proof. Applicable to either commercial or hazardous industrial areas, such as explosive Zone 1 and 2, and Zone 21 and 22 with flammable dust.

Integration of the emitting and receiving part makes for easy installation and accurate optical pathway. Built-in microprocessor enables intelligent judgment of fire alarm and fault. Easy alignment ensures a single person installation. Self-diagnostic. Drift-compensation for factors weakness, such as dust contamination, positional excursion and component ageing. Integrated functions for both addressable and conventional use. Electrically address by handheld programmer. Fire and fault volt-free contact output for Integration of the system. 2 sensitivity levels can be set by programmer. SMT processing technology.

Additional detector Emitter / Receiver for barrier 3000-115 configurable from 5 to 100 meters.

Configurable sender / receiver barrier from 5 to 100 meters. for environments that require intrinsically safe detectors. Independent transmitter and receiver unit (Exd Certificate). Allows 2 detectors per system controller (Additional detectors: 3000-026). Relays independent of fires and failures per detector. Integrated LASER alignment. Low current consumption Two wire connection between controller and receiver. Remote controller with LCD screen. Sensitivity and configurable delays. Compensation for dust contamination and movement of the available building. Adjustable light cancellation technology. Complies with ATEX, IECEx, EN54: 12, VdS.

additional detector for infrared rays barrier with a maximum range of 50 metres, to use with FD805R-N or FD810R-N. Power supply 24VDC. Maximum consumption: 50mA. Working temperature: -10ºC to 55ºC. IP54. Measures and weight of the detector: 135x135x135mm. and 0,5Kg. Measures and weight of the reflector: 100x100x9,5mm and 0,07Kg. Certified: CE and CPR (EN54 part 12).

DI-9104Exd is a light-sensitive detector that detects fire by picking up the ultraviolet light from flaming material. It’s designed for areas where an open fire is liable to occur with large amount of radiation and no smoldering stage, or where quick response to a fire is required. This detector can be applicable to zone 1 and 2 of explosive areas. The detector is able to work either in addressable mode connecting with GST intelligent fire alarm control panel to transmit signal through detection loop or in non-addressable mode connecting to 24VDC power supply to transmit signal by outputting different resistance values.

Controller with an auto-adjustable infrared rays linear smoke detector with a maximum range of 50 to 100 x 7,5 metres. Possibility of connecting up to 2 detectors per controller. Power supply 24VDC. Maximum consumption: 36mA. Working temperature: -10ºC to 55ºC. IP54. Measures and weight of the detector: 135x135x135mm. and 0,5Kg. Measures and weight of the controller: 200x235x71mm. and 1Kg. Measures and weight of the reflector: 100x100x9,5mm and 0,07Kg. Certified: CE and CPR (EN54 part 12).

additional Transmitter/Receiver for FD310 barrier.

additional detector for infrared rays barrier with a maximum range of 100 metres, to use with FD805R-N or FD810R-N. Power supply 24VDC. Maximum consumption: 50mA. Working temperature: -10ºC to 55ºC. IP54. Measures and weight of the detector: 135x135x135mm. and 0,5Kg. Measures and weight of the reflector: 100x100x9,5mm and 0,07Kg. Certified: CE and CPR (EN54 part 12).

Smoke detector by infrared rays barrier with an adjustable range from 5 to 120 m. Includes transmitter, receiver and control unit. Possiblilty of connecting and additional transmitter or receiver. Auto-adjustable alignment. Programable sensitivity.IP54. Requires external power supply (12 to 24VDC) consumption14 mA. Working temperature: -20ºC to 55ºC. Certified: CE, VDS and CPR (EN54 part 12).

Cable sensor accessory. Double pin Support, L Shapped, 200mm arm. Made in stainless steel (Pack of 25 units).