English
Español
  • Search
    • +34 902930427

    0.00 €

    PCI Centrals and Modules

    Products 406
    UTC™ GST® Active EOL Unit for C Series Devices [P-9907]
    UTC™ GST® Active EOL Unit for C Series Devices
    Ref.: P-9907
    Matching with conventional fire alarm control panel or addressable zone monitor unit, P-9907 Active End of Line Unit takes place of end-of-line resistor which is connected to the loop in traditional way. It resolves such problems as abnormal operation of the whole system and nuisance alarm because of inappropriate resistor.
    V.A.T. included
    16.81 €
    KILSEN® Module of 4 Monitored Outputs [2010-1-SB]
    KILSEN® Module of 4 Monitored Outputs
    Ref.: 2010-1-SB
    Card of four relays with tension (1,2A, 24VDC) for conventional panels of 2010-10 seriem allowing 4 tension output of 24V. Allows to configure outputs for sounders or as monitored output of 24V to power supply others devices.
    V.A.T. included
    109.57 €
    Galvanic Isolator for KILSEN® Conventional Systems [GBX2000]
    Galvanic Isolator for KILSEN® Conventional Systems
    Ref.: GBX2000
    Galvanic barrier for conventional detectors intrinsically safe. Necessary for each input of the intrinsic safe zone.
    V.A.T. included
    707.78 €
    KILSEN® Module of 4 Unmonitored Outputs [2010-1-RB]
    KILSEN® Module of 4 Unmonitored Outputs
    Ref.: 2010-1-RB
    Card of four voltage free relays (1,2A, 24VDC) for conventional panels of 2010-1 serie, allows to assign a relay by zone or to programm activation functions depending on its configuration.
    V.A.T. included
    83.82 €
    KILSEN® Card for RS485 Network Communication [2010-1-NB]
    KILSEN® Card for RS485 Network Communication
    Ref.: 2010-1-NB
    Network card for 2010-1 serie panels that allows to create a network of analogical, conventional and extincion panels (Class A/B), with a miximum of 32 nodes/ 32 loops / 64 zones.
    V.A.T. included
    335.17 €
    Galvanic Isolator for KILSEN® AS372/FA370 Series [GBX370]
    Galvanic Isolator for KILSEN® AS372/FA370 Series
    Ref.: GBX370
    Galvanic barrier special for AS372 siren and FA370 pilots.
    V.A.T. included
    721.79 €
    UTC™ Aritech™ Conventional Fire Panel (Detection & Extinguishing) - 2+1 Zones [1X-X3-09]
    UTC™ Aritech™ Conventional Fire Panel (Detection & Extinguishing) - 2+1 Zones
    Ref.: 1X-X3-09
    Programmable fire detection and extinguishing control unit for the control of 1 risk (2 crossed detection zones and 1 free zone - programmable) of any extinguishing installation using gaseous agents. Direct inputs for stop, trigger, pause button, pressure switch monitoring and outputs for pre-alarm siren, triggered extinction signaling, open door control and extinction trigger (solenoid or pyrotechnic option). Indicator (led) for each extinction control output. Ground fault detection. Expandable I / O via 2010-1-RB / SB card. 4A power supply. 2-level siren output. Auto / manual control and indicators through the user interface. Certificates: CE and CPR (EN54-2, EN54-4, EN12094-1 for gas extinguishing). Requires 2 batteries, reference BS127N (not included).
    V.A.T. included
    556.03 €
    UTC™ Aritech™ Conventional Fire Panel (Detection) - 4 Zones (Board Only) [1X-F4-MB]
    UTC™ Aritech™ Conventional Fire Panel (Detection) - 4 Zones (Board Only)
    Ref.: 1X-F4-MB
    Conventional fire detection control unit (.net) with 4 microprocessed zones with the possibility of combining push buttons and detectors in one zone, with 4 outputs for supervised sirens (250mA each), 2 voltage-free relay outputs (1.2A, 24VDC ) for alarm and fault and 2 configurable inputs. Upgradeable firmware. It allows complete communication with our analogue control panels via RS-485 connection, as well as the connection between conventional control panels (max. 64 zones). For the connection you need the 2010-1-NB card (not included). CleanMeTM function (dirty detector indication). Zone test by one person. Ground fault supervision. It can incorporate 4-output modules (2010-1-RB and 2010-1-SB). Optical-acoustic indications by zones. Certificates: CE, CPR (EN-54 parts 2 and 4), CPD, WEEE and RoHS. Requires 2 batteries not included. Dimensions: 435 x 320 x 134 mm.
    V.A.T. included
    307.68 €
    UTC™ Aritech™ Conventional Fire Panel (Detection) - 4 Zones [1X-F4-09]
    UTC™ Aritech™ Conventional Fire Panel (Detection) - 4 Zones
    Ref.: 1X-F4-09
    Conventional fire detection control unit (.net) with 4 microprocessed zones with the possibility of combining push buttons and detectors in one zone, with 4 outputs for supervised sirens (250mA each), 2 voltage-free relay outputs (1.2A, 24VDC ) for alarm and fault and 2 configurable inputs. Upgradeable firmware. It allows complete communication with our analogue control panels via RS-485 connection, as well as the connection between conventional control panels (max. 64 zones). For the connection you need the 2010-1-NB card (not included). CleanMeTM function (dirty detector indication). Zone test by one person. Ground fault supervision. It can incorporate 4-output modules (2010-1-RB and 2010-1-SB). Optical-acoustic indications by zones. Certificates: CE, CPR (EN-54 parts 2 and 4), CPD, WEEE and RoHS. Requires 2 batteries not included. Dimensions: 435 x 320 x 134 mm.
    V.A.T. included
    270.68 €
    UTC™ Aritech™ Conventional Fire Panel (Detection) - 2 Zones (Board Only) [1X-F2-MB]
    UTC™ Aritech™ Conventional Fire Panel (Detection) - 2 Zones (Board Only)
    Ref.: 1X-F2-MB
    Conventional fire detection control panel (.net) with 2 microprocessed zones with the possibility of combining push buttons and detectors in one zone, with 2 outputs for supervised sirens (250mA each), 2 voltage-free relay outputs (1.2A, 24VDC ) for alarm and fault and 2 configurable inputs. Upgradeable firmware. It allows complete communication with our analogue control panels via RS-485 connection, as well as the connection between conventional control panels (max. 64 zones). For the connection you need the 2010-1-NB card (not included). CleanMeTM function (dirty detector indication). Zone test by one person. Ground fault supervision. It can incorporate 4-output modules (2010-1-RB and 2010-1-SB). Optical-acoustic indications by zones. Certificates: CE, CPR (EN-54 parts 2 and 4), CPD, WEEE and RoHS. Requires 2 batteries not included. Dimensions: 435 x 320 x 134 mm.
    V.A.T. included
    282.00 €
    UTC™ Aritech™ Conventional Fire Panel (Detection & Extinguishing) - 2+1 Zones (Board Only) [1X-X3-MB]
    UTC™ Aritech™ Conventional Fire Panel (Detection & Extinguishing) - 2+1 Zones (Board Only)
    Ref.: 1X-X3-MB
    Programmable fire detection and extinguishing control unit for the control of 1 risk (2 crossed detection zones and 1 free zone - programmable) of any extinguishing installation using gaseous agents. Direct inputs for stop, trigger, pause button, pressure switch monitoring and outputs for pre-alarm siren, triggered extinction signaling, open door control and extinction trigger (solenoid or pyrotechnic option). Indicator (led) for each extinction control output. Ground fault detection. Expandable I / O via 2010-1-RB / SB card. 4A power supply. 2-level siren output. Auto / manual control and indicators through the user interface. Certificates: CE and CPR (EN54-2, EN54-4, EN12094-1 for gas extinguishing). Requires 2 boxes + batteries, reference BS127N (not included).
    V.A.T. included
    444.37 €
    UTC™ Aritech™ Conventional Fire Panel (Detection) - 8 Zones (Board Only) [1X-F8-MB]
    UTC™ Aritech™ Conventional Fire Panel (Detection) - 8 Zones (Board Only)
    Ref.: 1X-F8-MB
    Conventional fire detection panel (.net) with 8 microprocessed zones with the possibility of combining push buttons and detectors in one zone, with 4 outputs for supervised sirens (500mA each), 2 voltage-free relay outputs (1.2A, 24VDC ) for alarm and fault and 2 configurable inputs. Upgradeable firmware. It allows complete communication with our analogue control panels via RS-485 connection, as well as the connection between conventional control panels (max. 64 zones). For the connection you need the 2010-1-NB card (not included). CleanMeTM function (dirty detector indication). Zone test by one person. Ground fault supervision. It can incorporate 4-output modules (2010-1-RB and 2010-1-SB). Optical-acoustic indications by zones. Certificates: CE, CPR (EN-54 parts 2 and 4), CPD, WEEE and RoHS. Requires 2 batteries not included. Dimensions: 480 x 440 x 140 mm.
    V.A.T. included
    393.12 €
    UTC™ Aritech™ Conventional Fire Panel (Detection & Extinguishing) - 2+1 Zones [1X-X3E-09]
    UTC™ Aritech™ Conventional Fire Panel (Detection & Extinguishing) - 2+1 Zones
    Ref.: 1X-X3E-09
    Programmable fire detection and extinguishing control unit for the control of 1 risk (2 crossed detection zones and 1 free zone - programmable) of any extinguishing installation using gaseous agents. Direct inputs for stop, trigger, pause button, pressure switch monitoring and outputs for pre-alarm siren, triggered extinction signaling, open door control and extinction trigger (solenoid or pyrotechnic option). Own indicator (led) for each extinction control output. Ground fault detection. Expandable I / O via 2010-1-RB / SB card. For network connection you need the 2010-1-NB card (not included). 4A power supply. 2-level siren output. Auto / manual control and indicators through the user interface. Certificates: CE and CPR (EN54-2, EN54-4, EN12094-1 for gas extinguishing). Requires 2 batteries, reference BS127N (not included).
    V.A.T. included
    769.21 €
    UTC™ Aritech™ Conventional Fire Panel (Detection) - 8 Zones [1X-F8-09]
    UTC™ Aritech™ Conventional Fire Panel (Detection) - 8 Zones
    Ref.: 1X-F8-09
    Conventional fire detection panel (.net) with 8 microprocessed zones with the possibility of combining push buttons and detectors in one zone, with 4 outputs for supervised sirens (500mA each), 2 voltage-free relay outputs (1.2A, 24VDC ) for alarm and fault and 2 configurable inputs. Upgradeable firmware. It allows complete communication with our analogue control panels via RS-485 connection, as well as the connection between conventional control panels (max. 64 zones). For the connection you need the 2010-1-NB card (not included). CleanMeTM function (dirty detector indication). Zone test by one person. Ground fault supervision. It can incorporate 4-output modules (2010-1-RB and 2010-1-SB). Optical-acoustic indications by zones. Certificates: CE, CPR (EN-54 parts 2 and 4), CPD, WEEE and RoHS. Requires 2 batteries not included. Dimensions: 480 x 440 x 140 mm.
    V.A.T. included
    406.02 €
    UTC™ Aritech™ Conventional Fire Panel (Detection) - 2 Zones [1X-F2-09]
    UTC™ Aritech™ Conventional Fire Panel (Detection) - 2 Zones
    Ref.: 1X-F2-09
    Conventional fire detection control panel (.net) with 2 microprocessed zones with the possibility of combining push buttons and detectors in one zone, with 2 outputs for supervised sirens (250mA each), 2 voltage-free relay outputs (1.2A, 24VDC ) for alarm and fault and 2 configurable inputs. Upgradeable firmware. It allows complete communication with our analogue control panels via RS-485 connection, as well as the connection between conventional control panels (max. 64 zones). For the connection you need the 2010-1-NB card (not included). CleanMeTM function (dirty detector indication). Zone test by one person. Ground fault supervision. It can incorporate 4-output modules (2010-1-RB and 2010-1-SB). Optical-acoustic indications by zones. Certificates: CE, CPR (EN-54 parts 2 and 4), CPD, WEEE and RoHS. Requires 2 batteries not included. Dimensions: 435 x 320 x 134 mm.
    V.A.T. included
    236.89 €
    KILSEN® Conventional Fire Panel with User Interface - 8 Zones [KFP-CF8-09]
    KILSEN® Conventional Fire Panel with User Interface - 8 Zones
    Ref.: KFP-CF8-09
    Conventional fire detection panel (.net) of 8 microprocessed zones with possibility to combine in a zone push buttons and detectors, with 4 outputs for monitored sounders (250mA c/u), 2 voltage free outputs (1,2, 24VDC) for alarms and failure and 2 configurable inputs. Upgradeable firmeware. Allows the complete communication with out analogical panels through RS-485 connection, as well as the connection between conventional panels (Maximum 64 zones). The connection requires 2010-1-NB card (Not included). Zones test for a unique person. Supervisión del fallo de deriVACión a tierra. Can include module of 4 outputs (2010-1-RB and 2010-1-SB). Optical/acoustic indications by zones. Certified: CE, CPR (EN-54 parts 2 and 4), CPD, WEEE and RoHS. Requires 2 batteries not included. Weight: 3,9Kg. Dimensions: 480x440x140mm.
    V.A.T. included
    406.02 €
    KILSEN® Conventional Fire Panel with User Interface - 4 Zones [KFP-CF4-09]
    KILSEN® Conventional Fire Panel with User Interface - 4 Zones
    Ref.: KFP-CF4-09
    Conventional fire detection panel (.net) of 4 microprocessed zones with possibility to combine in a zone push buttons and detectors, with two outputs for monitored sounders (250mA c/u), 2 voltage free outputs (1,2, 24VDC) for alarms and failure and 2 configurable inputs. Upgradeable firmeware. Allows the complete communication with out analogical panels through RS-485 connection, as well as the connection between conventional panels (Maximum 64 zones). The connection requires 2010-1-NB card (Not included). Zones test for a unique person. Supervisión del fallo de deriVACión a tierra. Can include module of 4 outputs (2010-1-RB and 2010-1-SB). Optical/acoustic indications by zones. Certified: CE, CPR (EN-54 parts 2 and 4), CPD, WEEE and RoHS. Requires 2 batteries not included. Weight: 2,8Kg. Dimensions: 435x320x134mm.
    V.A.T. included
    270.68 €
    UTC™ GST® Conv. Repeater Panel [GST-RP16]
    UTC™ GST® Conv. Repeater Panel
    Ref.: GST-RP16
    GST-RP-16 Conventional Repeater Panel, provides a remote display for the GST108 and the GST116 conventional fire panels. Visual and audible fire indication proveded in alarm conditions. Mute facillity for silencing of panel sounder. GSTRP-16 can connect to more than one control panel, for example 2x GST108 conventional fire panels. 16 Zones, for GST101, GST102A, GST104A, GST108A & GST116A Panels.
    V.A.T. included
    303.73 €
    Conventional UTC™ GST® Control Panel, 8 Zones [GST108A]
    Conventional UTC™ GST® Control Panel, 8 Zones
    Ref.: GST108A
    This Conventional Fire Alarm Control Panel is designed in compliance with EN 54-2 & EN54-4 standard. It’s compatible with GST conventional detectors, manual call points and sounders. The panel is easy to install and operate. Control functions are enabled by a key switch. Programming functions are enabled by a key switch and an internal switch. Connecting with conventional detectors and manual call points, generating alarm in case of fire, to save human life. Every detection zone can have at most 15 conventional detectors. The total number of detectors and call points in a zone shall not exceed 32. The A series panel is an upgrading version of previous GST100 series conventional panel. New designed front fascia, printed circuit board and simplified operations make it more reliable, stable and convenience to use.
    V.A.T. included
    500.35 €
    Conventional UTC™ GST® Control Panel, 4 Zones [GST104A]
    Conventional UTC™ GST® Control Panel, 4 Zones
    Ref.: GST104A
    This Conventional Fire Alarm Control Panel is designed in compliance with EN 54-2 & EN54-4 standard. It’s compatible with GST conventional detectors, manual call points and sounders. The panel is easy to install and operate. Control functions are enabled by a key switch. Programming functions are enabled by a key switch and an internal switch. Connecting with conventional detectors and manual call points, generating alarm in case of fire, to save human life. Every detection zone can have at most 15 conventional detectors. The total number of detectors and call points in a zone shall not exceed 32. The A series panel is an upgrading version of previous GST100 series conventional panel. New designed front fascia, printed circuit board and simplified operations make it more reliable, stable and convenience to use.
    V.A.T. included
    379.81 €
    Conventional UTC™ GST® Control Panel, 2 Zones [GST102A]
    Conventional UTC™ GST® Control Panel, 2 Zones
    Ref.: GST102A
    This Conventional Fire Alarm Control Panel is designed in compliance with EN 54-2 & EN54-4 standard. It’s compatible with GST conventional detectors, manual call points and sounders. The panel is easy to install and operate. Control functions are enabled by a key switch. Programming functions are enabled by a key switch and an internal switch. Connecting with conventional detectors and manual call points, generating alarm in case of fire, to save human life. Every detection zone can have at most 15 conventional detectors. The total number of detectors and call points in a zone shall not exceed 32. The A series panel is an upgrading version of previous GST100 series conventional panel. New designed front fascia, printed circuit board and simplified operations make it more reliable, stable and convenience to use.
    V.A.T. included
    326.35 €
    Conventional UTC™ GST® Control Panel, 16 Zones [GST116A]
    Conventional UTC™ GST® Control Panel, 16 Zones
    Ref.: GST116A
    This Conventional Fire Alarm Control Panel is designed in compliance with EN 54-2 & EN54-4 standard. It’s compatible with GST conventional detectors, manual call points and sounders. The panel is easy to install and operate. Control functions are enabled by a key switch. Programming functions are enabled by a key switch and an internal switch. Connecting with conventional detectors and manual call points, generating alarm in case of fire, to save human life. Every detection zone can have at most 15 conventional detectors. The total number of detectors and call points in a zone shall not exceed 32. The A series panel is an upgrading version of previous GST100 series conventional panel. New designed front fascia, printed circuit board and simplified operations make it more reliable, stable and convenience to use.
    V.A.T. included
    691.03 €
    UTC™ Aritech™ 1 Zone Monitoring Module (Up to 30 Detect.) Conventional [IU2055NC]
    UTC™ Aritech™ 1 Zone Monitoring Module (Up to 30 Detect.) Conventional
    Ref.: IU2055NC
    One zone monitor module to control up to 20 conventional detectors or push buttons. It discriminates pushbutton and detector on the control panel display, discriminates breakdown due to cut or short circuit, occupies an address in the loop and is powered by it. Status indicator LED. It has a remote pilot output. Certificates: CE and CPR (EN54 part 18).
    V.A.T. included
    101.23 €
    UTC™ Aritech™ Isolator Module for Analogic Loop Protection [ISM-95]
    UTC™ Aritech™ Isolator Module for Analogic Loop Protection
    Ref.: ISM-95
    Short circuit protection isolator module in the analogical loop, with status indicator LED, which isolates the area between two isolators, in the event of a short circuit in the loop. It does not take direction in the loop. Certificates: CE and CPR (EN54 part 17).
    V.A.T. included
    49.82 €
    SYSAWAY© 2024 All rights reserved