Phone dialer for conventional telephone line, that connected with our algorithmic panels, allows you to received text notifications about installation status in a phone. Dispose of severals zone control inputs, as well as programmable outputs for remote uses, such as replace of the panel, activate or desactivate devices.

TCP Network card for connection of algorithmic panels in Ethernet networking TCP/IP 10/100 Mbps. The card is housed inside the panel. For AE/SA-C2 and AE/SA-C8.

TCP Network card for connection of algorithmic panels in Ethernet networking TCP/IP 10/100 Mbps. The card is housed inside the panel. For AE/SA-C1.

Mircroprocessed control unit of two algorithmic loops. The capacity of each loop is about 125 devices, whcich you can connect detectors, push buttons, manoeuvre module, control module and more elements that configure the installation. Capacity to control a total of 250 devices. Dispose of light indicators for the control of correct operation and communication between devices and the panel.

Smart central for fire control with bus connections for 1 to 4 cards (AE/SA-CTL) . Each card control two bidirectional algorithm loop, with capacity of 125 devices for each loop, where you can connect detectors, buttons, manoeuvre module and more elements that configure the installation. Capacity to control up to 1000 devices that can control up to 3000 independents points. For each 250 devices the central provide an independen microprocesor. Independent switching power supply of 27,2VDC 4A. Emergency battery charger. Capacity for two 12V/17Ah batteries. Dimensions: High 500- Width 390- Depth 145mm.

Remote control terminal made by AGUILERA™ ELECTRÓNICA, provide remote control and managment of fire protection installations based in their algorithm centrals. This terminal permit aloof control by cable (RS-485) any installation based in AE/SA-C1, AE/SA-C2 and AE/SA-C8 centrals. Network connection, through RS-485 communication channel. All control panels shows general status of all existing centrals in the network. Provided with independent power supply and capacity for two 7Ah batteries. Dimensions: 410 x 310 x 120 mm.

Provided of 1 AE/SA-CTL card with 2 loops for 125 devices each, where you can connect detectors, buttons, manoeuvre module, control and more elements that configure the installation. Control Capacity up to 250 equipments. Switching power supply of 27.2VDC 4A. Emergency battery charger. Capacity for two 12V/7Ah batteries. Dimensions: High: 410- Width 310- Depth120mm.

Provided of 1 loop of 125 devices, where you can connect detectors, buttons, manoeuvre module, control and more elements that configure the installation. Switching power supply of 27,2VDC 2A. Emergency battery charger. Capacity for two batteries of 12V/7Ah. Dimensions: High 274 - Width 322 - Depth 123mm.

RS485 communications card for connecting the RP1R-RPT repeater or the RP1R-PAN-V annunciator up to 1,200 meters away. It has 24VDC output to power the repeater or isolator.

Card of 4 NA/NC relay. Each relay can be configured independently and connect to 12 activation configurable matrices. Its installed inside the panel.

Card with RS-232 communication port for control and technical management systems or graphic programs of VISION-PLUS2, RP1R-SUPRA and VISION-RP1R-PLUS2 panels. Its installed inside the panel.

Detection and fire extinction panel controlled by double microprocessor with redundance, with history of the last 450 events. Icludes leds that indicate the the state of the system and displaying screen with the downloading time digits and push button, extinction manual, discharged gas sign and key for mode selection: manual, automatic or out of order. Totally programmable: waiting times and pause, crossed zone, extinction secuency, etc. Incorporates input circuits for conventional detectors, input for pause or delay button, manual button, monitoring devices such as como pressure switch, low pressure, open doors and mechanical cancellation. Includes output circuits for the indication of the different stages of the system, sounders output with three phases: alert, alarm, and extinction, discharged gas sign, double extinction circuit and closing gates and signaling of the state of the system circuits. Opcionalmente permite conectar los siguientes módulos: un módulo ITAC, una tarjeta VSN-232 de puerto serie y un comunicador IP. Cabina con capacidad para 2 baterías de hasta 7A. No incluye baterías. Detection and fire extinction panel controlled by double microprocessor with redundancy, with a historic of the 450 last events. Dispose of LEDs status system indicators and visual display with two digits with the unloading time and includes an extinction push button, letters of launched gas and key to select a manual, automatical or out of service mode. Totally programmable.

Event annunciator with personalized voice and written messages for RP1R-Supra extinguishing systems.

Detection and extinction panel with 4,3" TFT touch screen and 480x272 pixels. With 32 bits microprocessor of the latest technology and controlled by double microprocessed circuit. Includes control and signaling circuit, power supply commuted with battery charge and room for 2 12V 7Ah batteries. Includes 42 leds that indicate the state of the system and displaying screen with downloading time digits and “discharged Gas ” sign and key for mode selection manual, automatic or out of order. Programmable functions of pause and delay, discharge timing, crossed zone, extinction secuency, etc. Incorporates circuits for alarm input for connection of conventional detectors, pause button, release button and monitoring devices; Output circuits for indication of alarm output with three phases, discharged Gas sign, double extinction circuit controlled by programmable timing and circuits for gate closing and signaling of the state of the system EN-12094 homologated.

Remote repeater for central RP1R-SUPRA detection and extinction via VSN-485. Requires external 24 VDC power. In accordance with Regulation (EU) No 305/2011 of the European Parliament regarding construction products.

To integrate DurGas/SiedeGas system in a BMS /SCADA system its necessary to acquire the Integra II module. Only for expandable panels. Integra II, is a module “plug&play” that allows the integration with other systems of DURGAS and SIEDEGAS panels, configuration from one to four zones, up a maximum number of 20 panels. Its not valide for DurGas Mini and SiedeGas Mini panels.

MODBUS Converter RTU-TCP/IP (1 per Panel)

This interface allows the connection of detectors with a standard format 4-20mA - 2 or 3 wires- with EUROSONDELCO, SIEMENS CC62P, DURGAS and SIEDEGAS panels in format RS485. With metal box.

DURGAS™ Module for power supply control.

Optional remote relay modules can be connected to the loops of the zone, in the installation point that you want to, and up to a maximum of 5. This module offers four manoeuvre outputs + one protected alarm with fuse, In addition to the individual manoeuvre status indication and the communication status.

DURGAS™ Module for zone panel.

Module. Zone 110. Standards (ESP/PRT) Languages (ESP/ENG/PRT). NO INCLUDES A ZONE PANEL.

Module. Zone 110 + Panel module TO EXPAND A panel ITS NECESSARY TO ACQUIRE A COMPLETE ZONE, COMPOSED BY A ZONE MODULE + A PANEL MODULE.

Detection panel for toxic, explosives and oxygen gases. 2 Zones. Expandable. Automatically detects the amount and type of detectors, as well as the rest of devices connected to its loop, auto configuration of gases type, ventilation level and alarm. Appropriate for industrial applications, underground parking and tunnels. Its compatible with all Eurosondelco, DURTEX, DIREX, DURTOX, SONDELTOX detectors and with new detectors DURPARK RS485. Programmed in accordance with differents standards and language. Each zone includes a LCD display with independent functioning.