English
Español
  • Search
  • 0.00 €

    Sources & Batteries

    Products 1037
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    POWER PRODUCT™ 12VDC 1.4Amp Power Supply [16ADS120/14.00]
    POWER PRODUCT™ 12VDC 1.4Amp Power Supply
    Ref.: 16ADS120/14.00
    This product is intended for general use to feed electric and electronic devices in covered rooms, in environments without risk of explosion. Power supplies are PLUG-IN type. Stabilized output voltage. Voltage 12 VDC - 1.4 Amp. Output - twin-lead wire. Protection degree IP20.
    V.A.T. included
    Consult
    Splitter with 8 x DC 2.1/5.5 Socket [SP8]
    Splitter with 8 x DC 2.1/5.5 Socket
    Ref.: SP8
    Splitter, cable - 8x connector DC5,5/2 enables easy connection for max. 8 devices featuring DC5,5/2,1 outlet, supplied from a common PSU with one output.
    V.A.T. included
    7.11 €
    Módulo de Salidas Técnicas PULSAR® MPOC [AWZ639]
    Módulo de Salidas Técnicas PULSAR® MPOC
    Ref.: AWZ639
    The AWZ639 relay module of technical outputs is designed to change the OC (open collector) outputs to relay outputs in buffer power supplies of 12 and 24 V. The LEDs on the PCB indicate the status of the individual relays. Power supply input of the module is protected against reverse connection of power supply. CAUTION! Module is intended for power supplies with technical outputs.
    V.A.T. included
    21.34 €
    PULSAR® PoE Distribution Module 4 / 4x1A / 1.5 [AWZ602]
    PULSAR® PoE Distribution Module 4 / 4x1A / 1.5
    Ref.: AWZ602
    Power distribution module for IP cameras (PoE). Size: 105 x 43 x 24 mm, Uin=20÷56 VDC (+/-2%), UPoE=Uin (equal to supply voltage), 4x1.0A. Number of power inputs: 2 - DC 5.5/2.1 socket or screw terminal – max. cable length 1.5mm2. Number of PoE outputs: 4 – RJ45. The module supports both 10Mbps and 100Mbps networks).
    V.A.T. included
    Consult
    PULSAR® Crosier Anchor Support [OZB1]
    PULSAR® Crosier Anchor Support
    Ref.: OZB1
    Size: 152x112 mm.
    V.A.T. included
    Consult
    PULSAR® Boxed PSU IP65 24VAC / 6A / 1x6A / HERMETIC for Rotating Camera [PSACH01246EKO]
    PULSAR® Boxed PSU IP65 24VAC / 6A / 1x6A / HERMETIC for Rotating Camera
    Ref.: PSACH01246EKO
    Power supply: 230VAC. Power supply output: 1x6A/24VAC. Protections: SCP, OLP, OHP. Operating conditions: 2nd environmental class, indoor, -25°C÷40°C. Dimensions: W=160 H=160 D=90 [+/- 2mm]. The number of cable glands / The diameter of the cable: 2 pcs / 4÷8mm. Notes: hermetic enclosure IP65, ABS, surface mounted, locking – bolted.
    V.A.T. included
    162.62 €
    GEOVISION™ GV-MountD501 (24 VAC 72VA) PSU [81-P2030-001]
    GEOVISION™ GV-MountD501 (24 VAC 72VA) PSU
    Ref.: 81-P2030-001
    220VAC Outdoor Power Supply for SD010 / SD200.
    V.A.T. included
    Consult
    PULSAR® Boxed PSU IP65 24VAC / 6A / 1x6A / HERMETIC [PSACH01246]
    PULSAR® Boxed PSU IP65 24VAC / 6A / 1x6A / HERMETIC
    Ref.: PSACH01246
    Power supply for cameras 24VAC in ABS enclosure, hermetic IP65. Size: 160 x 160 x 90 mm, Uout=24VAC/27VAC, 1x6A@24V or 1x5.5A@27V. SCP (short circuit protection) with standard fuses. Number of cable glands: 2. Diameter of the cable: 4 to 8 mm.
    V.A.T. included
    172.79 €
    PULSAR® Boxed PSU IP65 24VAC / 4A / 1x4A / HERMETIC [PSACH01244]
    PULSAR® Boxed PSU IP65 24VAC / 4A / 1x4A / HERMETIC
    Ref.: PSACH01244
    Power supply for cameras 24VAC in ABS enclosure, hermetic IP65. Size: 160 x 160 x 90 mm, Uout=24VAC/27VAC, 1x4A@24V or 1x3.7A@27V. SCP (short circuit protection) with standard fuses. Number of cable glands: 2. Diameter of the cable: 4 to 8 mm.
    V.A.T. included
    162.62 €
    PULSAR® 24VAC / 6A / 8x0,75A Power Supply Unit in Metal Enclosure [PSAC08246]
    PULSAR® 24VAC / 6A / 8x0,75A Power Supply Unit in Metal Enclosure
    Ref.: PSAC08246
    Power supply for 24VAC cameras with metal enclosure. Size: 215 x 246 x 64 mm, 8 x adjustment, 8x0.75A, (? 6A max. for 24VAC, ? 5.5A max. for 27VAC), SCP (short circuit protection): standard fuses or PTC fuses. LED x 8: AC Failure. LED x 1: AW (Output Failure).
    V.A.T. included
    249.02 €
    PULSAR® Switched and Buffered PSU 13,8V / 12V / 20A / 2x17Ah [PSUPS20A12CR]
    PULSAR® Switched and Buffered PSU 13,8V / 12V / 20A / 2x17Ah
    Ref.: PSUPS20A12CR
    Switch mode buffer power supply units for HD cameras 13.8VDC and recorder 12VDC, and recorder space. Size: 425 x 535 x 190+14 mm. ?I=11A (8x0.75A/13.8VDC + 1x4A/12VDC). Recorder space: 380 x 335 x 80 mm. Tamper:1xNC, 17Ah-UVP (battery protection).
    V.A.T. included
    767.38 €
    PULSAR® Switched and Buffered PSU 13.8V / 12V / 10A / 17Ah [PSUPS10A12CR]
    PULSAR® Switched and Buffered PSU 13.8V / 12V / 10A / 17Ah
    Ref.: PSUPS10A12CR
    Switch mode buffer power supply units for HD cameras 13.8VDC and recorder 12VDC, and recorder space. Size: 425 x 535 x 190+14 mm. ?I=11A (8x0.75A/13.8VDC + 1x4A/12VDC). Recorder space: 380 x 335 x 80 mm. Tamper:1xNC, 17Ah-UVP (battery protection).
    V.A.T. included
    642.87 €
    PULSAR® Switched and Buffered PSU 13,8V / 9A / 9x1A / 17Ah [PSDCB09129C]
    PULSAR® Switched and Buffered PSU 13,8V / 9A / 9x1A / 17Ah
    Ref.: PSDCB09129C
    Switch mode buffer power supply unit (transformerless) for cameras 12VDC (+/- 15%). Size: 285 x 297 x 80+8 mm. Uin=176÷264VAC, Uout=13,8VDC/9x1A, ?I=9A+1A. Tamper: 1xNC, 17Ah. SCP (short-circuit protection) with standard fuses, OVP (over voltage protection), OLP (overload protection), UVP (deep discharge battery protection).
    V.A.T. included
    276.97 €
    PULSAR® Switched PSU 12V / 8A / 8x1A / TOPIC with Separated Channels [PSDCSEP08128]
    PULSAR® Switched PSU 12V / 8A / 8x1A / TOPIC with Separated Channels
    Ref.: PSDCSEP08128
    Power supply for cameras 12VDC with independent control of each output channel. Size: 365 x 220 x 70+8 mm. Uin=85÷264VAC, Uout=12,0÷15VDC. 8 x adjustment. 8x1A (independent regulation and galvanic separation of each channel). OVP (over voltage protection), SCP (short-circuit protection) with standard fuses.
    V.A.T. included
    533.61 €
    PULSAR® 12V / 14A / 16x1A / TOPIC PSU with DVR Space in Metal Enclosure [PSDCR161214]
    PULSAR® 12V / 14A / 16x1A / TOPIC PSU with DVR Space in Metal Enclosure
    Ref.: PSDCR161214
    Power supply for 12VDC cameras with recorder space. Size: 430 x 605 x 100+14 mm. Uin=176÷264VAC, Uout=12÷15VDC. 1 x adjustment. 16x0.87A, 14A. Recorder space max.: 400 x 100 x 345, SCP (short-circuit protection) with standard fuses, OVP (over voltage protection).
    V.A.T. included
    515.82 €
    PULSAR® 12V / 8A / 8x1A / TOPIC PSU with Space for DVR in Metal Enclosure [PSDCR08128]
    PULSAR® 12V / 8A / 8x1A / TOPIC PSU with Space for DVR in Metal Enclosure
    Ref.: PSDCR08128
    Power supply for 12VDC cameras with recorder space. Size: 430 x 605 x 100+14 mm. Uin=176÷264VAC, Uout=12÷15VDC. 1 x adjustment. 8x1A, 8A, recorder space max.: 400 x 100 x 345 mm. SCP (short-circuit protection) with standard fuses, OVP (over voltage protection).
    V.A.T. included
    426.89 €
    PULSAR® PSU with Fuses 12V / 16A / 16x1A / TOPIC in Metal Enclosure [PSDC161216T]
    PULSAR® PSU with Fuses 12V / 16A / 16x1A / TOPIC in Metal Enclosure
    Ref.: PSDC161216T
    Power supply for 12VDC cameras with standard fuses. ECONOMICAL VERSION. Size: 295 x 246 x 51+8 mm. Uin=176÷264VAC, Uout=12,0÷15VDC. 1x adjustment, 16x1A, 16A. OVP (over voltage protection), SCP (short-circuit protection).
    V.A.T. included
    251.56 €
    PULSAR® PSU with Fuses 12V / 8A / 8x1A / TOPIC in Metal Enclosure [PSDC08128T]
    PULSAR® PSU with Fuses 12V / 8A / 8x1A / TOPIC in Metal Enclosure
    Ref.: PSDC08128T
    Power supply for 12VDC cameras with standard fuses. ECONOMICAL VERSION. Size: 295 x 246 x 51+8 mm. Uin=176÷264VAC, Uout=12,0÷15VDC. 1x adjustment, 8x1A, 8A. OVP (over voltage protection), SCP (short-circuit protection).
    V.A.T. included
    180.41 €
    PULSAR® PSU with Fuses 12V / 5A / 5x1A / TOPIC in Metal Enclosure [PSDC05125T]
    PULSAR® PSU with Fuses 12V / 5A / 5x1A / TOPIC in Metal Enclosure
    Ref.: PSDC05125T
    Power supply for 12VDC cameras with standard fuses. ECONOMICAL VERSION. Size: 235 x 181 x 51+8 mm. Uin=85÷264VAC, Uout=12,0÷15VDC. 1x adjustment, 5x1.0A, 5A. OVP (over voltage protection), SCP (short-circuit protection).
    V.A.T. included
    157.54 €
    PULSAR® PSU with Fuses 12V / 12A / 16x0.8A / TOPIC in Metal Enclosure [PSDC161212T]
    PULSAR® PSU with Fuses 12V / 12A / 16x0.8A / TOPIC in Metal Enclosure
    Ref.: PSDC161212T
    Power supply for 12VDC cameras with standard fuses. ECONOMICAL VERSION. Size: 295 x 246 x 51+8 mm. Uin=176÷264VAC, Uout=12,0÷15VDC. 1x adjustment, 16x0.8A, 12A. OVP (over voltage protection), SCP (short-circuit protection).
    V.A.T. included
    200.74 €
    PULSAR® PSU with Fuses 12V / 8A / 8x1A in Metal Enclosure [PSDC08128]
    PULSAR® PSU with Fuses 12V / 8A / 8x1A in Metal Enclosure
    Ref.: PSDC08128
    Power supply for 12VDC cameras. Switch mode (without a transformer), in metal casing. Size: 285 x 260 x 58 mm. Uin=176÷264VAC, Uout=12.0÷15.0VDC. 1 x adjustment, 8x1A , 8A. AW (failure output), OVP (over voltage protection), SCP (short-circuit protection) with standard fuses or PTC fuses, LED 1x8: DC, LED 1x1: AW.
    V.A.T. included
    241.40 €
    PULSAR® PSU with Fuses 12V / 4A / 4x1A in Metal Enclosure [PSDC04124]
    PULSAR® PSU with Fuses 12V / 4A / 4x1A in Metal Enclosure
    Ref.: PSDC04124
    Power supply for 12VDC cameras. Switch mode (without a transformer), in metal casing. Size: 235 x 172 x 58 mm. Uin=85÷264VAC, Uout=12.0÷15.0VDC. 1 x adjustment, 4x1,0A , 4A. AW (failure output), OVP (over voltage protection), SCP (short-circuit protection) with standard fuses or PTC fuses, LED 4: DC, LED 1: AW.
    V.A.T. included
    190.58 €
    PULSAR® PSU with Fuses 12V / 14A / 16x1A in Metal Enclosure [PSDC161214]
    PULSAR® PSU with Fuses 12V / 14A / 16x1A in Metal Enclosure
    Ref.: PSDC161214
    Power supply for 12VDC cameras. Switch mode (without a transformer), in metal casing. Size: 285 x 260 x 58 mm. Uin=176÷264VAC, Uout=12.0÷15.0VDC. 1 x adjustment, 16x0,8A , 14A. AW (failure output), OVP (over voltage protection), SCP (short-circuit protection) with standard fuses or PTC fuses, LED 2x8: DC, LED 2x1: AW.
    V.A.T. included
    340.49 €
    SYSAWAY© 2024 All rights reserved