English
Español
  • Search
    • +34 902930427

    0.00 €

    Sources & Batteries

    Products 1037
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    • Access Control Readers
    PULSAR® HPSB 27,6V/3Amp/2x7Ah Buffer Switch Mode PSU [HPSB3524B]
    PULSAR® HPSB 27,6V/3Amp/2x7Ah Buffer Switch Mode PSU
    Ref.: HPSB3524B
    A buffer PSU is intended for an uninterrupted supply to devices requiring stabilised voltage of 24V DC (+/-15%). The PSU provides voltage of U=27,6V DC. In case of power decay, a battery back-up is activated immediately. The PSU is constructed based on the switch mode PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which can accommodate two 7Ah/12V batteries. A micro switch indicates door opening (front cover). Power supply: 176÷264VAC/50Hz. Power supply output: 3A/27,6VDC. Battery charging current: 0,5A/1Amp. Fitting battery: 2x7Ah/12V. Efficiency: 83%. Protections: SCP, OVP, OLP, UVP, tamper (opening of the enclosure). Dimensions: W=280, H=292, D+D1=82+8 [+/- 2mm]. Notes: surface mounted enclosure, locking – bolted (lock assembly possible).
    V.A.T. included
    Consult
    PULSAR® HPSB 13.8V/20Amp/65Ah Buffer Switch Mode PSU [HPSB20A12E]
    PULSAR® HPSB 13.8V/20Amp/65Ah Buffer Switch Mode PSU
    Ref.: HPSB20A12E
    A buffer PSU is intended for an uninterrupted supply to devices requiring stabilised voltage of 12V DC (+/-15%). The PSU provides voltage of U=13,8V DC. In case of power decay, a battery back-up is activated immediately. The PSU is constructed based on the switch mode PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which can accommodate a 65Ah/12V battery. Amicro switch indicates door opening (front cover). Power supply: 176÷264VAC/50Hz. Power supply output: 20A/13,8VDC. Battery charging current: 2A/4A/8A. Fitting battery: 65Ah/12V. Efficiency: 85%. Protections: SCP, OVP, OLP, UVP, OHP, tamper (opening of the enclosure). Dimensions: W=400, H=350, D+D1=173+8 [+/- 2mm]. Surface mounted enclosure, locking – bolted (lock assembly possible). Built-in power factor correction system (PFC). Forced cooling - built-in fan.
    V.A.T. included
    388.77 €
    PULSAR® HPSB 13.8V/5Amp/17Ah Buffer Switch Mode PSU [HPSB5512C]
    PULSAR® HPSB 13.8V/5Amp/17Ah Buffer Switch Mode PSU
    Ref.: HPSB5512C
    A buffer PSU intended for uninterrupted supply to devices that require stabilised voltage of 12V DC (+/-15%). The PSU provides voltage of U=13,8V DC with output current of I=5A + 0,5A for battery charging. In case of power decay, a battery back-up is activated immediately. The PSU is constructed based on the switch mode PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which can accommodate a 17Ah/12V battery. A micro switch indicates door opening (front cover). Power supply: 176÷264VAC/50Hz. Power supply output: 5A/13,8VDC. Battery charging current: 0,5Amp. Fitting battery: 17Ah/12V. Efficiency: 80%. Protections: SCP, OVP, OLP, UVP, tamper (opening of the enclosure). Dimensions: W=280, H=292, D+D1=82+8 [+/- 2mm]. Notes: surface mounted enclosure, locking – bolted (lock assembly possible).
    V.A.T. included
    Consult
    PULSAR® HPSB 13.8V/3Amp/17Ah Buffer Switch Mode PSU [HPSB3512C]
    PULSAR® HPSB 13.8V/3Amp/17Ah Buffer Switch Mode PSU
    Ref.: HPSB3512C
    A buffer PSU intended for uninterrupted supply to devices that require stabilised voltage of 12V DC (+/-15%). The PSU provides voltage of U=13,8V DC with output current of I=3A + 0,5A for battery charging. In case of power decay, a battery back-up is activated immediately. The PSU is constructed based on the switch mode PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which can accommodate a 17Ah/12V battery. A micro switch indicates door opening (front cover). Power supply: 176÷264VAC/50Hz. Power supply output: 3A/13,8VDC. Battery charging current: 0,5Amp. Fitting battery:17Ah/12V. Efficiency: 76%. Protections: SCP, OVP, OLP, UVP, tamper (opening of the enclosure). Dimensions: W=280, H=292, D+D1=82+8 [+/- 2mm]. Notes: surface mounted enclosure, locking – bolted (lock assembly possible).
    V.A.T. included
    Consult
    PULSAR® HPSB 13.8V/6Amp/17Ah Buffer Switch Mode PSU [HPSB7012C]
    PULSAR® HPSB 13.8V/6Amp/17Ah Buffer Switch Mode PSU
    Ref.: HPSB7012C
    A buffer PSU is intended for an uninterrupted supply to devices requiring stabilised voltage of 12V DC (+/-15%). In case of power decay, a battery back-up is activated immediately. The PSU is constructed based on the switch mode PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which can accommodate a 17Ah/12V battery. A micro switch indicates door opening (front cover). Power supply: 176÷264VAC/50Hz. Power supply output: 6A/13,8VDC. Battery charging current: 1A/2Amp. Fitting battery: 17Ah/12V. Efficiency: 80%. Protections: SCP, OVP, OLP, UVP, tamper (opening of the enclosure). Dimensions: W=280, H=292, D+D1=82+8 [+/- 2mm]. Notes: surface mounted enclosure, locking – bolted (lock assembly possible).
    V.A.T. included
    Consult
    PULSAR® HPSB 13.8V/3Amp/7Ah Buffer Switch Mode PSU [HPSB3512B]
    PULSAR® HPSB 13.8V/3Amp/7Ah Buffer Switch Mode PSU
    Ref.: HPSB3512B
    A buffer PSU intended for uninterrupted supply to devices that require stabilised voltage of 12V DC (+/-15%). The PSU provides voltage of U=13,8V DC with output current of I=3A + 0,5A for battery charging. In case of power decay, a battery back-up is activated immediately. The PSU is constructed based on the switch mode PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL9003) which can accommodate a 7Ah/12V battery. A micro switch indicates door opening (front cover). Power supply: 176÷264VAC/50Hz. Power supply output: 3A/13,8VDC. Battery charging current: 0,5Amp. Fitting battery: 7Ah/12V. Efficiency: 76%. Protections: SCP, OVP, OLP, UVP, tamper (opening of the enclosure). Dimensions: W=250, H=250, D+D1=82+8 [+/- 2mm]. Notes: surface mounted enclosure, locking – bolted (lock assembly possible).
    V.A.T. included
    Consult
    PULSAR® HPSB 13.8V/1Amp/7Ah Buffer Switch Mode PSU [HPSB1512B]
    PULSAR® HPSB 13.8V/1Amp/7Ah Buffer Switch Mode PSU
    Ref.: HPSB1512B
    A buffer PSU intended for uninterrupted supply to devices that require stabilised voltage of 12V DC (+/-15%). The PSU provides voltage of U=13,8V DC with output current of I=1A + 0,5A for battery charging. In case of power decay, a battery back-up is activated immediately. The PSU is constructed based on the switch mode PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL9003) which can accommodate a 7Ah/12V battery. A micro switch indicates door opening (front cover). Power supply: 176÷264VAC/50Hz. Power supply output: 1A/13,8VDC. Battery charging current: 0,5Amp. Fitting battery: 7Ah/12V. Efficiency: 70%. Protections: SCP, OVP, OLP, UVP, tamper (opening of the enclosure). Dimensions: W=200, H=230, D+D1=82+8 [+/- 2mm]. Notes: surface mounted enclosure, locking – bolted (lock assembly possible).
    V.A.T. included
    Consult
    PULSAR® 54V Automation Module [MPSB48]
    PULSAR® 54V Automation Module
    Ref.: MPSB48
    Operating automation module. Size: 127 x 56 x 58 mm, Uin=54VDC, technical outputs: (relay type and transistor type), FAC - AC failure, FPS - PSU failure, FLB - low battery voltage).
    V.A.T. included
    55.65 €
    PULSAR® 27.6V Automation Module [MPSB24]
    PULSAR® 27.6V Automation Module
    Ref.: MPSB24
    Operating automation module. Size: 127 x 56 x 58 mm, Uin=27.6VDC, technical outputs: (relay type and transistor type), FAC - AC failure, FPS - PSU failure, FLB - low battery voltage).
    V.A.T. included
    55.65 €
    PULSAR® PSCLB 13,8V/3Amp Buffer Switch Mode PSU [PSCLB13830]
    PULSAR® PSCLB 13,8V/3Amp Buffer Switch Mode PSU
    Ref.: PSCLB13830
    The buffer power supply is designed for uninterrupted supply of devices requiring stabilized voltage of 12 V DC (+/-15%). The PSU supplies voltage of 13,8 V DC with current efficiency of I = A + 0,3 A battery charging. In the case of mains power failure, the unit will instantly switch to battery power. The power supply unit is protected against shortcircuit, overload and overvoltage. During normal operation, the total current drawn by the device cannot exceed I=3 A. The maximum battery charging current is 0,3 A. The total current of the receivers + battery is max. 3,3 A. Power supply: 90÷264VAC/50Hz. Power supply output: 3A/13,8VDC. Battery charging current: 0,3Amp. Efficiency: 85%. Protections: SCP, OLP, UVP. IP67 over molded plastic enclosure. Plastic enclosure with mounting brackets. Dimensions: 178 x 56 x 34 mm.
    V.A.T. included
    62.51 €
    PULSAR® PSCLB 13,8V/2Amp Buffer Switch Mode PSU [PSCLB13820]
    PULSAR® PSCLB 13,8V/2Amp Buffer Switch Mode PSU
    Ref.: PSCLB13820
    The buffer power supply is designed for uninterrupted supply of devices requiring stabilized voltage of 12 V DC (+/-15%). The PSU supplies voltage of 13,8 V DC with current efficiency of I = A + 0,3 A battery charging. In the case of mains power failure, the unit will instantly switch to battery power. The power supply unit is protected against shortcircuit, overload and overvoltage. During normal operation, the total current drawn by the device cannot exceed I=2 A. The maximum battery charging current is 0,3 A. The total current of the receivers + battery is max. 2,3 A. Power supply: 90÷264VAC/50Hz. Power supply output: 2A/13,8VDC. Battery charging current: 0,3Amp. Efficiency: 82%. Protections: SCP, OLP, UVP. IP67 over molded plastic enclosure. Plastic enclosure with mounting brackets. Dimensions: 150 x 56 x 34 mm.
    V.A.T. included
    55.65 €
    PULSAR® Buffered PSU in 13,8 / 7A / OC Grid Box with Wired Connectors [PSBOC1001270]
    PULSAR® Buffered PSU in 13,8 / 7A / OC Grid Box with Wired Connectors
    Ref.: PSBOC1001270
    Switch mode buffer power supply unit for cameras and recorders. Size: 199 x 97 x 65 mm. Uin=176÷264VAC, Uout=13.8VDC. ?I=7A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection), EPS (AC Failure), PSU (Power Supply Failure), LoB (Low Battery Voltage).
    V.A.T. included
    Consult
    PULSAR® Buffered PSU in 13,8 / 3,5A / OC Grid Box with Wired Connectors [PSBOC501235]
    PULSAR® Buffered PSU in 13,8 / 3,5A / OC Grid Box with Wired Connectors
    Ref.: PSBOC501235
    Switch mode buffer power supply unit for cameras and recorders. Size: 160 x 98 x 65 mm. Uin=176÷264VAC, Uout=13.8VDC. ?I=3.5A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection), EPS (AC Failure), PSU (Power Supply Failure), LoB (Low Battery Voltage).
    V.A.T. included
    Consult
    PULSAR® Buffered PSU in 13,8V / 5A / OC Grid Box with Wired Connectors [PSBOC751250]
    PULSAR® Buffered PSU in 13,8V / 5A / OC Grid Box with Wired Connectors
    Ref.: PSBOC751250
    Switch mode buffer power supply unit for cameras and recorders. Size: 159 x 97 x 65 mm. Uin=176÷264VAC, Uout=13.8VDC. ?I=5A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection), EPS (AC Failure), PSU (Power Supply Failure), LoB (Low Battery Voltage).
    V.A.T. included
    Consult
    PULSAR® Buffered PSU in 27.6V / 5.5A Grid Box with Wired Connectors [PSB-1552455]
    PULSAR® Buffered PSU in 27.6V / 5.5A Grid Box with Wired Connectors
    Ref.: PSB-1552455
    Switch mode buffer power supply unit for cameras and recorders. Size: 199 x 110 x 50 mm. Uin=176÷264VAC, Uout=27,6VDC. ?I=5.5A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection).
    V.A.T. included
    112.06 €
    PULSAR® Buffered PSU in 13,8V / 20A Grid Box with Wired Connectors [PSB-30012200]
    PULSAR® Buffered PSU in 13,8V / 20A Grid Box with Wired Connectors
    Ref.: PSB-30012200
    Switch mode buffer power supply unit for cameras and recorders. Size: 275 x 115 x 50 mm. Uin=176÷264VAC, Uout=13,8VDC. ?I=20A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection).
    V.A.T. included
    190.58 €
    PULSAR® Buffered PSU in 13,8V / 2,5A Grid Box with Wired Connectors [PSB-351225]
    PULSAR® Buffered PSU in 13,8V / 2,5A Grid Box with Wired Connectors
    Ref.: PSB-351225
    Switch mode buffer power supply unit for cameras and recorders. Size: 128 x 98 x 41 mm. Uin=176÷264VAC, Uout=13,8VDC. ?I=2.5A, SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection).
    V.A.T. included
    Consult
    PULSAR® Buffered PSU in 13,8V / 7A Grid Box with Wired Connectors [PSB-1001270]
    PULSAR® Buffered PSU in 13,8V / 7A Grid Box with Wired Connectors
    Ref.: PSB-1001270
    Switch mode buffer power supply unit for cameras and recorders. Size: 199 x 97 x 42 mm. Uin=176÷264VAC, Uout=13,8VDC. ?I=7A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection).
    V.A.T. included
    Consult
    PULSAR® Buffered PSU in 13,8V / 5A Grid Box with Wired Connectors [PSB-751250]
    PULSAR® Buffered PSU in 13,8V / 5A Grid Box with Wired Connectors
    Ref.: PSB-751250
    Switch mode buffer power supply unit for cameras and recorders. Size: 159 x 97 x 42 mm. Uin=176÷264VAC, Uout=13,8VDC. ?I=5A. SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection).
    V.A.T. included
    Consult
    PULSAR® Buffered PSU in 13,8V / 3,5A Grid Box with Wired Connectors [PSB-501235]
    PULSAR® Buffered PSU in 13,8V / 3,5A Grid Box with Wired Connectors
    Ref.: PSB-501235
    Switch mode buffer power supply unit for cameras and recorders. Size: 160 x 98 x 42 mm. Uin=176÷264VAC, Uout=13,8VDC. ?I=3.5A, SCP (Short Circuit Protection), OLP (Overload Protection), OVP (Over Voltage PRotection), UVP (Deep Discharge Battery Protection).
    V.A.T. included
    Consult
    PULSAR® 12V/1.2Amp Switch-Mode Power Supply Adapter [PSR12012]
    PULSAR® 12V/1.2Amp Switch-Mode Power Supply Adapter
    Ref.: PSR12012
    Switch-mode power supply for CCTV - desktop (cable-cable) - 12÷15VDC. Uin=90-264VAC 50Hz, Uout=12-15VDC. Size: 78 x 48 x 35(41.5) mm. IMAX=1.2A, I=0.84A, SCP (short circuit protection), OLP (overload protection), LED (operation status indication) x 1.
    V.A.T. included
    25.41 €
    PULSAR® PSD 52V/2,3Amp Desktop PSU for CCTV [PSD520230]
    PULSAR® PSD 52V/2,3Amp Desktop PSU for CCTV
    Ref.: PSD520230
    The power supply is intended for supply cameras that require stabilised voltage of 52 V DC. The unit has a cable with a DC5.5/2.1 plug. The power supply unit is protected against short-circuit, overload and overvoltage. Power supply: 90 ÷264V AC/50Hz. Power supply output: 2,3A/52VDC. Efficiency: 90%. Efficiency level: VI. Protections: SCP, OLP. Indicators: LED. Dimensions: 162 x 69 x 34 [mm]. Notes: cable with a 5,5/2,1 plug and permanently attached 230V power cable.
    V.A.T. included
    123.24 €
    PULSAR® PSD 52V/1,75Amp Desktop PSU for CCTV [PSD520175]
    PULSAR® PSD 52V/1,75Amp Desktop PSU for CCTV
    Ref.: PSD520175
    The power supply is intended for supply cameras that require stabilised voltage of 52 V DC. The unit has a cable with a DC5.5/2.1 plug. The power supply unit is protected against short-circuit, overload and overvoltage. Power supply: 100÷240V AC/50Hz. Power supply output: 1,75A/52VDC. Efficiency: 92%. Efficiency level: VI. Protections: SCP, OLP. Indicators: LED. Dimensions: 132 x 61 x 32 mm. Notes: cable with a 5,5/2,1 plug and permanently attached 230V power cable.
    V.A.T. included
    60.22 €
    PULSAR® 230VAC 2x0.5 mm² (1.2 m) Power Cable [PSD12]
    PULSAR® 230VAC 2x0.5 mm² (1.2 m) Power Cable
    Ref.: PSD12
    Additional power cord 230VAC 2x0.5mm2, 1.2m, CEE 7/16, IEC C7.
    V.A.T. included
    Consult
    SYSAWAY© 2024 All rights reserved