Power supply for 12VDC cameras. Switch mode (without a transformer), in metal casing. Size: 285 x 260 x 58 mm. Uin=176÷264VAC, Uout=12.0÷15.0VDC. 1 x adjustment, 16x0.5A , 8A. AW (failure output), OVP (over voltage protection), SCP (short-circuit protection) with standard fuses or PTC fuses, LED 2x8: DC, LED 2x1: AW.

Mounting kit for DIN rail.

The transformers are destined for supplying devices requiring AC voltage U1 or U2. (intercom, electric strike). Power supply voltage: 230 VAC. Power supply output: 11.5V/0.8Amp or 14V/0.6Amp. Power: 10VA. Notes: epoxy encapsulated. Protection rating: IP64. Cable length L2: 1610mm. Cable length L1: 1025mm. Operating temperature: -10º C÷40º C. Heat class: Ta 40B. Dimensions: 88 x 54 x 70 mm.

Power: 60VA. Power supply: 230V/50Hz/0.33A. Power supply output: 18V/3,3A or 20V/3,0A. Enclosure: PC/ABS, V-O, IP43. Thermal fuse 130ºC. Notes: epoxy encapsulated. For mounting on a DIN rail, required bracket: AWO466.

Power: 230VA. Power supply: 230V/50Hz/0.04Amp. Power supply output: 16.5V/1.8Amp. Enclosure: ABS, epoxy encapsulated. To be mounted on a flat surface. Supply voltage: V DC230V AC. Current consumption: 1.80Amp. Output voltage: 16.50V. Power: 30VA. Dimensions: 88 x 54 x 60 mm. Operating temperature: -10 ... +40° C.

Power: 230VA. Power supply: 230V/50Hz/0.04Amp. Power supply output: 16.5V/2.7Amp. Enclosure: ABS, epoxy encapsulated. To be mounted on a flat surface. Supply voltage: V DC230V AC. Current consumption: 0.06Amp. Output voltage: 16.50V. Power: 45VA. Dimensions: 88 x 54 x 60 mm. Operating temperature: -10 ... +40° C.

Power: 80VA. Power supply: 230V/50Hz/0.4Amp. Power supply output: 17V/4.7Amp or 24V/3.3Amp or 30V/2.7Amp. Enclosure: PC/ABS UL 94 V-0, IP30. Thermal fuse 130º C. Notes: epoxy encapsulated. For mounting on a DIN rail, required bracket: AWO467. Supply voltage: V DC230V AC. Current consumption: 0,40A. Output voltage: 17, 24, 30V. Dimensions: 100 x 137 x 70 mm. Operating temperature: -10 ... +40° C.

Power: 80VA. Power supply: 230V/50Hz/0.4Amp. Power supply output: 16V/5Amp or 18V/4.5Amp or 20V/4Amp. Enclosure: PC/ABS, V-O, IP30. Thermal fuse 130º C. Notes: epoxy encapsulated. For mounting on a DIN rail, required bracket: AWO467. Supply voltage: 230V AC. Current consumption: 0.40Amp. Output voltage: 16, 18, 20V. Dimensions: 100 x 137 x 70 mm. Operating temperature: -10 ... +40° C. Protection class: 30IP.

Power: 50VA. Power supply: 230V/50Hz/0.25Amp. Power supply output: 16V/3Amp lub 18V/2.8Amp lub 20V/2.5Amp. Enclosure: PC/ABS, V-O, IP30. Thermal fuse 130º C. Notes: epoxy encapsulated. For mounting on a DIN rail, required bracket: AWO467. Supply voltage: 230V AC. Current consumption: 0.25Amp. Output voltage: 16, 18, 20V. Dimensions: 100 x 137 x 70 mm. Operating temperature: -10 ... +40° C. Protection class: 30IP.

Power: 80VA. Power supply: 230V/50Hz/0.4Amp. Power supply output: 16V/5Amp lub 18V/4.5Amp lub 20V/4Amp. Enclosure: PC/ABS UL 94 V-0, IP43. Thermal fuse 130º C. Notes: epoxy encapsulated. For mounting on a DIN rail, required bracket: AWO467. Supply voltage: V DC230V AC. Current consumption: 0.40Amp. Output voltage: 16, 18, 20V. Dimensions: 95 x 136 x 76 mm. Operating temperature: -10 ... +40° C.

Power: 20VA. Power supply: 230V/50Hz/0.12A. Power supply output: 12V/1.6Amp lub 14V/1.4Amp. Enclosure: PC/ABS V-O, IP30. Thermal fuse 130º C. Notes: epoxy encapsulated. For mounting on a DIN rail, required bracket: AWO466. Dimensions: 72 x 124 x 70 mm. Operating temperature: -10 ... +40° C.

The buffer power supply is designed for uninterrupted supply of devices requiring stabilized voltage of 12V DC (+/-15%). The PSU supplies voltage of 13,8V DC with current efficiency of I = 5A + 0,5A battery charging. In the case of mains power failure, the unit will instantly switch to battery power. The PSU is fitted with short circuit protection and overload protection. The power supply unit is in plastic enclosure designed for DIN TH35 rail mounting (35mm width). Power supply: 176÷264VAC. Power supply output: 5A/13,8VDC. Battery charging current: 0,5Amp. Efficiency: 85%. Protections: SCP, OLP, UVP. Dimensions: L=122, W=93, H=60 [+/- 2mm]. Notes: for mounting on a DIN rail.

The buffer power supply is designed for uninterrupted supply of devices requiring stabilized voltage of 12V DC (+/-15%). The PSU supplies voltage of 13,8V DC with current efficiency of I = 2A + 0,5A battery charging. In the case of mains power failure, the unit will instantly switch to battery power. The PSU is fitted with short circuit protection and overload protection. The power supply unit is in plastic enclosure designed for DIN TH35 rail mounting (35mm width). Power supply: 90÷264VAC. Power supply output: 2A/13,8VDC. Battery charging current: 0,5Amp. Efficiency: 85%. Protections: SCP, OLP, UVP. Dimensions: L=122, W=93, H=50 [+/- 2mm]. Notes: for mounting on a DIN rail.

The buffer power supply is designed for uninterrupted supply of devices requiring stabilized voltage of 24V DC (+/-15%). The PSU supplies voltage of 27.6V DC with current efficiency of I = 3A + 0.2A battery charging. In the case of mains power failure, the unit will instantly switch to battery power. The PSU is fitted with short circuit protection and overload protection. The power supply unit is in plastic enclosure designed for DIN TH35 rail mounting (35mm width). Power supply: 176÷264VAC. Power supply output: 3A/27,6VDC. Battery charging current: 0,2Amp. Efficiency: 88%. Protections: SCP, OLP, UVP. Dimensions: L=122, W=93, H=60 [+/- 2mm]. Notes: for mounting on a DIN rail.

The buffer power supply is designed for uninterrupted supply of devices requiring stabilized voltage of 24V DC (+/-15%). The PSU supplies voltage of 27,6V DC with current efficiency of I = 2A + 0,2A battery charging. In the case of mains power failure, the unit will instantly switch to battery power. The PSU is fitted with short circuit protection and overload protection. The power supply unit is in plastic enclosure designed for DIN TH35 rail mounting (35mm width). Power supply: 90÷264VAC. Power supply output: 2A/27,6VDC. Battery charging current: 0,2Amp. Efficiency: 88%. Protections: SCP, OLP, UVP. Dimensions: L=122, W=93, H=50 [+/- 2mm]. Notes: for mounting on a DIN rail.

A buffer PSU is intended for an uninterrupted supply to devices requiring stabilized voltage of 24V DC (+/-15%). The PSU provides voltage of U=27,6 V DC. In case of power decay, a battery back-up is activated immediately. The PSU is constructed based on the switch mode PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which can accommodate two 2x17Ah/12V batteries. A micro switch indicates door opening (front cover). Power supply: 176÷264VAC. Power supply output: 5A/27.6VDC. Battery charging current: 0,5A/2A. Fitting battery: 2x17Ah/12V. Efficiency: 83%. Protections: SCP, OVP, OLP, UVP, tamper (opening of the enclosure). Technical outputs OC and relay type: EPS - AC network failure, LoB - low battery voltage, PSU - power supply failure. Dimensions: W=400, H=350, D+D1=92+8 [+/- 2mm]. Surface mounted enclosure, locking – bolted (lock assembly possible).

A buffer PSU is intended for an uninterrupted supply to devices requiring stabilized voltage of 24V DC (+/-15%). The PSU provides voltage of U=27,6V DC. In case of power decay, a battery back-up is activated immediately. The PSU is constructed based on the switch mode PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which can accommodate two 2x17Ah/12V batteries. A micro switch indicates door opening (front cover). Power supply: 176÷264VAC. Power supply output: 3A/27.6VDC. Battery charging current: 0,5A/1A. Fitting battery: 2x17Ah/12V. Efficiency: 83%. Protections: SCP, OVP, OLP, UVP, tamper (opening of the enclosure). Technical outputs OC and relay type: EPS - AC network failure, LoB - low battery voltage, PSU - power supply failure. Dimensions: W=400, H=350, D+D1=92+8 [+/- 2mm]. Surface mounted enclosure, locking – bolted (lock assembly possible).

A buffer PSU is intended for an uninterrupted supply to devices requiring stabilized voltage of 12V DC (+/-15%). The PSU provides voltage of U=13,8V DC. In case of power decay, a battery back-up is activated immediately. The PSU is constructed based on the switch mode PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which can accommodate a 17Ah/12V battery. A micro switch indicates door opening (front cover). Power supply: 176÷264VAC. Power supply output: 6A/13,8VDC. Battery charging current: 1A/2A. Fitting battery: 17Ah/12V. Efficiency: 80%. Protections: SCP, OVP, OLP, UVP, tamper (opening of the enclosure). Technical outputs OC and relay type: EPS - AC network failure, LoB - low battery voltage, PSU - power supply failure. Dimensions: W=280, H=292, D+D1=82+8 [+/- 2mm]. Surface mounted enclosure, locking – bolted (lock assembly possible).

A buffer PSU intended for uninterrupted supply to devices that require stabilized voltage of 12V DC (+/- 15%). The PSU provides voltage of U=13,8V DC with output current of I=3A + 0,5A for battery charging. In case of power decay, a battery back-up is activated immediately. The PSU is constructed based on the switch mode PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which can accommodate a 17Ah/12V battery. Amicro switch indicates door opening (front cover). Power supply: 176÷264VAC. Power supply output: 3A/13,8VDC. Battery charging current: 0,5A. Fitting battery:17Ah/12V. Efficiency: 76%. Protections: SCP, OVP, OLP, UVP, tamper (opening of the enclosure). Technical outputs OC and relay type: EPS - AC network failure, LoB - low battery voltage, PSU - power supply failure. Dimensions: W=280, H=292, D+D1=82+8 [+/- 2mm]. Surface mounted enclosure, locking – bolted (lock assembly possible).

A buffer PSU intended for uninterrupted supply to devices that require stabilized voltage of 12V DC (+/-15%). The PSU provides voltage of U=13,8V DC with output current of I=2A + 0,5A for battery charging. In case of power decay, a battery back-up is activated immediately. The PSU is constructed based on the switch mode PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which can accommodate a 7Ah/12V battery. Amicro switch indicates door opening (front cover). Power supply: 176÷264VAC. Power supply output: 2A/13,8VDC. Battery charging current: 0,5A. Fitting battery: 7Ah/12V. Efficiency: 74%. Protections: SCP, OVP, OLP, UVP, tamper (opening of the enclosure). Technical outputs OC and relay type: EPS - AC network failure, LoB - low battery voltage, PSU - power supply failure. Dimensions: W=250, H=250, D+D1=82+8 [+/- 2mm]. Surface mounted enclosure, locking – bolted (lock assembly possible).

An intermediate power supply designed for uninterrupted supply to devices that require a stabilized voltage of 12 VDC (+/- 15%). The power supply provides a voltage of U = 13.8 VDC with an output current of I = 3 Amp + 0.5 Amp for battery charging. In the event of a power failure, a backup battery is immediately activated. The unit is built on the basis of switched power supply, with high energy efficiency. The power supply is housed in a metal housing (RAL9003 color) that can accommodate a 7Ah / 12V battery. A microswitch indicates the opening of the door (front cover). Power supply: 176 ÷ 264VAC / 50Hz. Power supply output: 3A / 13.8VDC. Battery charging current: 0.5Amp. Mounting battery: Supports 7Ah / 12V. Efficiency: 87%. Protections: SCP, OVP, OLP, UVP, anti-sabotage (opening of the enclosure). Dimensions: 200 x 230 x 82 [+/- 2 mm]. Notes: Surface mounted box, locked - bolted (locking assembly possible).

A buffer PSU is intended for an uninterrupted supply to devices requiring stabilised voltage of 24V DC (+/-15%). The PSU provides voltage of U=27,6V DC. In case of power decay, a battery back-up is activated immediately. The PSU is constructed based on the switch mode PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which can accommodate two 17Ah/12V batteries. A micro switch indicates door opening (front cover). Power supply: 176÷264VAC/50Hz. Power supply output: 5A/27,6VDC. Battery charging current: 0,5A/2A. Fitting battery: 2x17Ah/12V. Efficiency: 83%. Protections: SCP, OVP, OLP, UVP, tamper (opening of the enclosure). Dimensions: W=400, H=350, D+D1=92+8 [+/- 2mm]. Notes: surface mounted enclosure, locking – bolted (lock assembly possible).

An intermediate power supply designed for uninterrupted supply to devices that require a stabilized voltage of 12 VDC (+/- 15%). The power supply provides a voltage of U = 13.8 VDC with an output current of I = 3 Amp + 0.5 Amp for battery charging. In the event of a power failure, a backup battery is immediately activated. The unit is built on the basis of switched power supply, with high energy efficiency. The power supply is housed in a metal housing (RAL9003 color) that can accommodate a 7Ah / 12V battery. A microswitch indicates the opening of the door (front cover). Power supply: 176 ÷ 264VAC / 50Hz. Power supply output: 3A / 13.8VDC. Battery charging current: 0.5Amp. Mounting battery: Supports 7Ah / 12V and 17Ah / 12V. Efficiency: 87%. Protections: SCP, OVP, OLP, UVP, anti-sabotage (opening of the enclosure). Dimensions: 230 x 300 x 82 [+/- 2 mm]. Notes: Surface mounted box, locked - bolted (locking assembly possible).

A buffer PSU is intended for an uninterrupted supply to devices requiring stabilised voltage of 24V DC (+/-15%). The PSU provides voltage of U=27,6V DC. In case of power decay, a battery back-up is activated immediately. The PSU is constructed based on the switch mode PSU, with high energy efficiency. The PSU is housed in a metal enclosure (colour RAL 9003) which can accommodate two 17Ah/12V batteries. A micro switch indicates door opening (front cover). Power supply: 176÷264VAC/50Hz. Power supply output: 3A/27,6VDC. Battery charging current: 0,5A/1A. Fitting battery: 2x17Ah/12V. Efficiency: 83%. Protections: SCP, OVP, OLP, UVP, tamper (opening of the enclosure). Dimensions: W=400, H=350, D+D1=92+8 [+/- 2mm]. Notes: surface mounted enclosure, locking – bolted (lock assembly possible).