English
Español
  • Search
    • +34 902930427

    0.00 €

    Fire Detectors

    Products 623
    Additional UTC™ Detector Set For End-to-End Beam Smoke Detector 5 - 100 m (Flame Proof) [3000-026]
    Additional UTC™ Detector Set For End-to-End Beam Smoke Detector 5 - 100 m (Flame Proof)
    Ref.: 3000-026
    Additional detector Emitter / Receiver for barrier 3000-115 configurable from 5 to 100 meters.
    V.A.T. included
    5,580.85 €
    UTC™ End-to-End Beam Smoke Detector 5 - 100 m (Flame Proof) [3000-115]
    UTC™ End-to-End Beam Smoke Detector 5 - 100 m (Flame Proof)
    Ref.: 3000-115
    Configurable sender / receiver barrier from 5 to 100 meters. for environments that require intrinsically safe detectors. Independent transmitter and receiver unit (Exd Certificate). Allows 2 detectors per system controller (Additional detectors: 3000-026). Relays independent of fires and failures per detector. Integrated LASER alignment. Low current consumption Two wire connection between controller and receiver. Remote controller with LCD screen. Sensitivity and configurable delays. Compensation for dust contamination and movement of the available building. Adjustable light cancellation technology. Complies with ATEX, IECEx, EN54: 12, VdS.
    V.A.T. included
    6,082.55 €
    Set of Smoke Optic Detection for Additional UTC™ IR Barrier [FD805RH-N]
    Set of Smoke Optic Detection for Additional UTC™ IR Barrier
    Ref.: FD805RH-N
    additional detector for infrared rays barrier with a maximum range of 50 metres, to use with FD805R-N or FD810R-N. Power supply 24VDC. Maximum consumption: 50mA. Working temperature: -10ºC to 55ºC. IP54. Measures and weight of the detector: 135x135x135mm. and 0,5Kg. Measures and weight of the reflector: 100x100x9,5mm and 0,07Kg. Certified: CE and CPR (EN54 part 12).
    V.A.T. included
    907.05 €
    UTC™ GST® Digital Flame Proof UV Flame Detector [DI-9104Exd]
    UTC™ GST® Digital Flame Proof UV Flame Detector
    Ref.: DI-9104Exd
    DI-9104Exd is a light-sensitive detector that detects fire by picking up the ultraviolet light from flaming material. It’s designed for areas where an open fire is liable to occur with large amount of radiation and no smoldering stage, or where quick response to a fire is required. This detector can be applicable to zone 1 and 2 of explosive areas. The detector is able to work either in addressable mode connecting with GST intelligent fire alarm control panel to transmit signal through detection loop or in non-addressable mode connecting to 24VDC power supply to transmit signal by outputting different resistance values.
    V.A.T. included
    774.84 €
    Set of Smoke Optic Detection for UTC™ IR Barrier [FD810R-N]
    Set of Smoke Optic Detection for UTC™ IR Barrier
    Ref.: FD810R-N
    Controller with an auto-adjustable infrared rays linear smoke detector with a maximum range of 50 to 100 x 7,5 metres. Possibility of connecting up to 2 detectors per controller. Power supply 24VDC. Maximum consumption: 36mA. Working temperature: -10ºC to 55ºC. IP54. Measures and weight of the detector: 135x135x135mm. and 0,5Kg. Measures and weight of the controller: 200x235x71mm. and 1Kg. Measures and weight of the reflector: 100x100x9,5mm and 0,07Kg. Certified: CE and CPR (EN54 part 12).
    V.A.T. included
    1,405.73 €
    UTC™ Additional Emisor/Receiver for FD310 Barrier [FD310H]
    UTC™ Additional Emisor/Receiver for FD310 Barrier
    Ref.: FD310H
    additional Transmitter/Receiver for FD310 barrier.
    V.A.T. included
    1,156.26 €
    Set of Smoke Optic Detection for Additional UTC™ IR Barrier [FD810RH-N]
    Set of Smoke Optic Detection for Additional UTC™ IR Barrier
    Ref.: FD810RH-N
    additional detector for infrared rays barrier with a maximum range of 100 metres, to use with FD805R-N or FD810R-N. Power supply 24VDC. Maximum consumption: 50mA. Working temperature: -10ºC to 55ºC. IP54. Measures and weight of the detector: 135x135x135mm. and 0,5Kg. Measures and weight of the reflector: 100x100x9,5mm and 0,07Kg. Certified: CE and CPR (EN54 part 12).
    V.A.T. included
    1,140.21 €
    UTC™ Optic Smoke Detector by IR Barrier - 5 a 120m [FD310]
    UTC™ Optic Smoke Detector by IR Barrier - 5 a 120m
    Ref.: FD310
    Smoke detector by infrared rays barrier with an adjustable range from 5 to 120 m. Includes transmitter, receiver and control unit. Possiblilty of connecting and additional transmitter or receiver. Auto-adjustable alignment. Programable sensitivity.IP54. Requires external power supply (12 to 24VDC) consumption14 mA. Working temperature: -20ºC to 55ºC. Certified: CE, VDS and CPR (EN54 part 12).
    V.A.T. included
    1,413.21 €
    LHD Cable Accessory - Bracket "L", 50mm (2") (St Steel) w/ Sleeve - Qty 25 [ACA-BL20SS-025]
    LHD Cable Accessory - Bracket "L", 50mm (2") (St Steel) w/ Sleeve - Qty 25
    Ref.: ACA-BL20SS-025
    Cable sensor accessory. Double pin Support, L Shapped, 200mm arm. Made in stainless steel (Pack of 25 units).
    V.A.T. included
    377.52 €
    LHD Cable Accessory - Clip "Edge", (Sp Steel) 3-8mm (2/16") - Qty 25 [ACA-CPSS-025]
    LHD Cable Accessory - Clip "Edge", (Sp Steel) 3-8mm (2/16") - Qty 25
    Ref.: ACA-CPSS-025
    Cable sensor accessory. Clip P shapped. Made in Stainless Steel. (Pack of 25 Units).
    V.A.T. included
    97.15 €
    LHD Cable Accessory - Bracket "U", 60mm (2.4") (Zintec) w/ Sleeve - Qty 25 [ACA-CE03-025]
    LHD Cable Accessory - Bracket "U", 60mm (2.4") (Zintec) w/ Sleeve - Qty 25
    Ref.: ACA-CE03-025
    The ACA-CE series "Edge" clip is designed to secure linear heat sensor cable to metal structures such as girders, steel sections, angle bars, floating roof storage tank rim seals, foam dams etc. It is available to mount on steelwork of differing thickness and provides a stand-off for the sensor cable ensuring rapid response.
    V.A.T. included
    132.77 €
    LHD Cable Accessory - Bracket "L", 50mm (2") (St Steel) w/ Sleeve - Qty 100 [ACA-BL05SS-100]
    LHD Cable Accessory - Bracket "L", 50mm (2") (St Steel) w/ Sleeve - Qty 100
    Ref.: ACA-BL05SS-100
    The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.
    V.A.T. included
    493.56 €
    LHD Cable Accessory - Bracket "L", 100mm (3.9") (St Steel) w/ Sleeve - Qty 25 [ACA-BL10SS-025]
    LHD Cable Accessory - Bracket "L", 100mm (3.9") (St Steel) w/ Sleeve - Qty 25
    Ref.: ACA-BL10SS-025
    The ACA-BL series L-brackets is designed to support linear heat cable above the risk area e.g. the top run of a cable tray. A silicon protection sleeve is supplied with the unit to protect the sensor cable when fastened to the bracket.
    V.A.T. included
    Consult
    LHD Cable Accessory - Clip "Edge", (Sp Steel) 2-3mm (1/16") - Qty 100 [ACA-CP-100]
    LHD Cable Accessory - Clip "Edge", (Sp Steel) 2-3mm (1/16") - Qty 100
    Ref.: ACA-CP-100
    The ACA-CP series "P" clip is designed to secure LHD (linear heat detection) sensor cable. Every clip is supplied with a silicone pad. The pad protects the cable from mechanical damage and insulates it from the clip to protect it against heat transfer between the mounting surface and the sensor cable.
    V.A.T. included
    164.38 €
    LHD Cable Accessory - Clip "Edge", (Sp Steel) 2-3mm (1/16") - Qty 25 [ACA-CP-025]
    LHD Cable Accessory - Clip "Edge", (Sp Steel) 2-3mm (1/16") - Qty 25
    Ref.: ACA-CP-025
    The ACA-CP series "P" clip is designed to secure LHD (linear heat detection) sensor cable. Every clip is supplied with a silicone pad. The pad protects the cable from mechanical damage and insulates it from the clip to protect it against heat transfer between the mounting surface and the sensor cable.
    V.A.T. included
    51.43 €
    LHD Cable Accessory - Bracket "V", (St Steel) w/ Sleeve - Qty 100 [ACA-CE14-100]
    LHD Cable Accessory - Bracket "V", (St Steel) w/ Sleeve - Qty 100
    Ref.: ACA-CE14-100
    The ACA-CE series "Edge" clip is designed to secure linear heat sensor cable to metal structures such as girders, steel sections, angle bars, floating roof storage tank rim seals, foam dams etc. It is available to mount on steelwork of differing thickness and provides a stand-off for the sensor cable ensuring rapid response.
    V.A.T. included
    310.68 €
    LHD Cable Accessory - Clip "Edge", (Sp Steel) 3-8mm (2/16") - Qty 100 [ACA-CPSS-100]
    LHD Cable Accessory - Clip "Edge", (Sp Steel) 3-8mm (2/16") - Qty 100
    Ref.: ACA-CPSS-100
    Cable sensor accessory. Clip P shapped. Made in Stainless Steel. (Pack of 100 Units).
    V.A.T. included
    354.35 €
    LHD Cable Accessory - Bracket "U", 60mm (2.4") (St Steel) w/ Sleeve - Qty 25 [ACA-CE08-025]
    LHD Cable Accessory - Bracket "U", 60mm (2.4") (St Steel) w/ Sleeve - Qty 25
    Ref.: ACA-CE08-025
    The ACA-CE series "Edge" clip is designed to secure linear heat sensor cable to metal structures such as girders, steel sections, angle bars, floating roof storage tank rim seals, foam dams etc. It is available to mount on steelwork of differing thickness and provides a stand-off for the sensor cable ensuring rapid response.
    V.A.T. included
    120.89 €
    LHD Cable Accessory - Bracket "U", 60mm (2.4") (Zintec) w/ Sleeve - Qty 100 [ACA-CE03-100]
    LHD Cable Accessory - Bracket "U", 60mm (2.4") (Zintec) w/ Sleeve - Qty 100
    Ref.: ACA-CE03-100
    The ACA-CE series "Edge" clip is designed to secure linear heat sensor cable to metal structures such as girders, steel sections, angle bars, floating roof storage tank rim seals, foam dams etc. It is available to mount on steelwork of differing thickness and provides a stand-off for the sensor cable ensuring rapid response.
    V.A.T. included
    424.90 €
    LHD Cable Accessory - Bracket "L", 200mm (7.9") (St Steel) w/ Sleeve - Qty 100 [ACA-CE02-100]
    LHD Cable Accessory - Bracket "L", 200mm (7.9") (St Steel) w/ Sleeve - Qty 100
    Ref.: ACA-CE02-100
    The ACA-CE series "Edge" clip is designed to secure linear heat sensor cable to metal structures such as girders, steel sections, angle bars, floating roof storage tank rim seals, foam dams etc. It is available to mount on steelwork of differing thickness and provides a stand-off for the sensor cable ensuring rapid response.
    V.A.T. included
    525.99 €
    LHD Cable Accessory - Bracket "L", 200mm (7.9") (Zintec) w/ Sleeve - Qty 100 [ACA-BVSS-100]
    LHD Cable Accessory - Bracket "L", 200mm (7.9") (Zintec) w/ Sleeve - Qty 100
    Ref.: ACA-BVSS-100
    The ACA-BV series V-bracket is designed to secure linear heat sensor cable in Admiralty cable tray installations. A silicon protection sleeve is supplied with the unit to protect the linear heat cable when fastened to the bracket.
    V.A.T. included
    1,129.73 €
    LHD Cable Accessory - Bracket "V", (St Steel) w/ Sleeve - Qty 25 [ACA-CE14-025]
    LHD Cable Accessory - Bracket "V", (St Steel) w/ Sleeve - Qty 25
    Ref.: ACA-CE14-025
    The ACA-CE series "Edge" clip is designed to secure linear heat sensor cable to metal structures such as girders, steel sections, angle bars, floating roof storage tank rim seals, foam dams etc. It is available to mount on steelwork of differing thickness and provides a stand-off for the sensor cable ensuring rapid response.
    V.A.T. included
    96.57 €
    LHD Cable Accessory - Bracket "U", 60mm (2.4") (St Steel) w/ Sleeve - Qty 100 [ACA-CE08-100]
    LHD Cable Accessory - Bracket "U", 60mm (2.4") (St Steel) w/ Sleeve - Qty 100
    Ref.: ACA-CE08-100
    The ACA-CE series "Edge" clip is designed to secure linear heat sensor cable to metal structures such as girders, steel sections, angle bars, floating roof storage tank rim seals, foam dams etc. It is available to mount on steelwork of differing thickness and provides a stand-off for the sensor cable ensuring rapid response.
    V.A.T. included
    386.58 €
    LHD Cable Accessory - Bracket "L", 100mm (3.9") (St Steel) w/ Sleeve - Qty 100 [ACA-BU06SS-100]
    LHD Cable Accessory - Bracket "L", 100mm (3.9") (St Steel) w/ Sleeve - Qty 100
    Ref.: ACA-BU06SS-100
    The ACA-BU06 series U-bracket (channel bracket) is designed to secure linear heat sensor cable to metal surfaces where there is no return edge available to fix a bracket or clip e.g. fixed roof storage tanks. A silicon protection sleeve is supplied with the unit to protect the linear heat cable when fastened to the bracket.
    V.A.T. included
    662.75 €
    SYSAWAY© 2024 All rights reserved