English
Español
  • Search
    • +34 902930427

    0.00 €

    Fire

    Products 2730
    • Access Control Readers
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    • Access Control Credentials
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-ID2net5C]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-ID2net5C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 5 panels with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-ID2net2C]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-ID2net2C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 2 panels with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus [IBOX-MBS-NID3K]
    Protocol Converter for NOTIFIER® Panel to Modbus
    Ref.: IBOX-MBS-NID3K
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor a unique panel with 8 loops and 99 sensors + 99 modules and 255 zones. Requires 24Vdc amd RS232 port. Available OPC server gateway.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus for 16 PEARL Panels [IBOX-MBS-PRLNET16C]
    Protocol Converter for NOTIFIER® Panel to Modbus for 16 PEARL Panels
    Ref.: IBOX-MBS-PRLNET16C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 16 panels with 2 loops and 159 sensors + 159 modules, 10 sub dirrections for each device and 64 zones. Requires 24Vdc amd RS232 port.
    V.A.T. included
    Consult
    Protocol Converter for NOTIFIER® Panel to Modbus for 5 PEARL Panels [IBOX-MBS-PRLNET5C]
    Protocol Converter for NOTIFIER® Panel to Modbus for 5 PEARL Panels
    Ref.: IBOX-MBS-PRLNET5C
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor 5 panels with 2 loops and 159 sensors + 159 modules, 10 sub dirrections for each device and 64 zones. Requires 24Vdc amd RS232 port.
    V.A.T. included
    Consult
    NOTIFIER® Modbus Panels Protocol Converter [IBOX-MBS-PRL]
    NOTIFIER® Modbus Panels Protocol Converter
    Ref.: IBOX-MBS-PRL
    Gateway that convert Pearl panels protocol in Modbus standard server for communicacion via RS232 or RS485 with RTU Modbus devices or via Ethernet through RJ45 TCP Modbus. Permit to monitor a unique panel with two loops and 159 sensors + 159 modules, 10 sub dirrections for each device and 64 zones. Requires 24Vdc amd RS232 port.
    V.A.T. included
    Consult
    NOTIFIER® IP Module [TG-IP1-SEC]
    NOTIFIER® IP Module
    Ref.: TG-IP1-SEC
    Redirector device of RS232 port of the panel to the graphic management software GT, through IP protocol. Compatible with Ethernet networks at 10 and 100 MHz. Dispose of port input RS232, Ethernet connection and 24V power supply.
    V.A.T. included
    Consult
    NOTIFIER® TG GSM Transmitter [TG-GSM]
    NOTIFIER® TG GSM Transmitter
    Ref.: TG-GSM
    Events transmitter from the panel to mobile phone through SMS. Compatible with all TG programms and ID50/60 panels. Requires GSM coverage, 24Vdc, a RS232 serie port from the PC and a SIM card.
    V.A.T. included
    Consult
    NOTIFIER® Converter from Cable to Single Mode Fiber [TCF142S]
    NOTIFIER® Converter from Cable to Single Mode Fiber
    Ref.: TCF142S
    Cable converter/amplifier of single mode fiber for ID2net network of ID3000 panels and Pearl up to 20km. Compatible with 8,3/125, 8,7/125, 9/125 and 10/125mm fiber. Requires 24Vdc/140mA from the panel. In Pearl panels its necessary 2 units per panel.
    V.A.T. included
    Consult
    NOTIFIER® Converter from Cable to Multi Mode Fiber [TCF142M]
    NOTIFIER® Converter from Cable to Multi Mode Fiber
    Ref.: TCF142M
    Cable converter/amplifier of multi mode fiber for ID2net network of ID3000 panels and Pearl up to 3km. Compatible with 50/125 and 62,5/125mm fiber. Transmission rate from 50 to 920bps. Requires 24Vdc/140mA from the panel. In Pearl panels its necessary 2 units per panel.
    V.A.T. included
    Consult
    Surface Mounting Box for HONEYWELL™ Transmitter [SMBT]
    Surface Mounting Box for HONEYWELL™ Transmitter
    Ref.: SMBT
    Box for surface mounting of UCIP/UCIP-GPRS transmitter. Have necessary holes to realize connections and quick and easy mounting inside panels. Built in antistatic ABS, cream colour and cover with space for identification sticker.
    V.A.T. included
    Consult
    HONEYWELL™ IP/CRA/GPRS/SMS Communication Module [UCIP-GPRS]
    HONEYWELL™ IP/CRA/GPRS/SMS Communication Module
    Ref.: UCIP-GPRS
    TCP-IP and GPRS Universal communicator for managment system connection or SMS status report and connection to panel alarm receiver (ID series and RP1r-Supra). Connection up to 2 receivers with encrypted communication according to AES 128 Level 4 standard about ID contact. Events transmission by zone or point. Direct connection to Ethernet network or GPRS mobile network. Monitoring frame and periodic stay alive for compatible receiver. Sent SMS status messages with device text, up to 2 users. No includes SIM card for GPRS/GMS network. Connection to RS-232 port. Fulfill EN54-21 and EN50136 Grade 4 standards. Requires 24VDC power supply and SMBT box.
    V.A.T. included
    Consult
    MorleyIAS® Diagnostic Tool [POL-200-TS]
    MorleyIAS® Diagnostic Tool
    Ref.: POL-200-TS
    Installer support tool for start-up and maintenance of analogical systems. Coloured touch screen with icons, intuitive use. Allows to diagnose the loop before panel connection and realize a verufication, indicate devices directions and possibles duplicated directions. Moreover, works with multimeter that allows to detect wire faillure.
    V.A.T. included
    Consult
    Module Interface for NOTIFIER® RP1R-SUPRA Extinction Panels [ITAC]
    Module Interface for NOTIFIER® RP1R-SUPRA Extinction Panels
    Ref.: ITAC
    Communication card that allows to transmit individualized information in each zone or extinction panel input to analogical panel where appears as input/output module using CLIP protocol. Depending on ITAC configuration, its possible to know the status of extinction equipment. Dirrectionable throught micropush buttons (01 to 99). Can occupy input and output directions to supervised. Its installated inside the integrated equipment and its power supplied.
    V.A.T. included
    Consult
    NOTIFIER® Link for Power Amplifier [002-629]
    NOTIFIER® Link for Power Amplifier
    Ref.: 002-629
    Device that increase the loop capacity to connect more power supply equipment as loop or sounders, flash or analogical barriers, Each 002-629 raise of 1 amp the loop capacity. Its recommended to no install more than two IDP-LB1 in each loop.
    V.A.T. included
    Consult
    40 Columns Thermal Printer for NOTIFIER® Devices [020-708-009]
    40 Columns Thermal Printer for NOTIFIER® Devices
    Ref.: 020-708-009
    Kit with thermal printer of 40 digits. Dispose of a communication interface RS232 range and use a COM A port included in all ID3000 analogical panels. Requires 020-508-009 cabine and 020-481-009 front conver. Check that COM A port of the panel is available. If its occupy for others devices connections (TG, ID-CRA or IBOX), Consult NOTIFIER.
    V.A.T. included
    Consult
    Cover Cap for NOTIFIER® ID3000 Supplement Cabinets [020-481-009]
    Cover Cap for NOTIFIER® ID3000 Supplement Cabinets
    Ref.: 020-481-009
    Frontal cover cap for 020-508-009, 020-509-009 and 020-474-009 expansion cabine.
    V.A.T. included
    Consult
    NOTIFIER® Repeater Panel for ID50/60 Panels [002-450-001]
    NOTIFIER® Repeater Panel for ID50/60 Panels
    Ref.: 002-450-001
    Remote repeater panel with LCD alphanumeric screen of 2 lines and 40 alphanumeric digits. Includes warning device, membrane keypad protected with access key to control key and functions and leds for status system visualization. Its compatible with ID50/60 analogical panels and can connect with an optional communication interface 020-553.
    V.A.T. included
    Consult
    NOTIFIER® Bus to Fiber Converter [ICF1170IMST]
    NOTIFIER® Bus to Fiber Converter
    Ref.: ICF1170IMST
    Fieldbus-to-fiber converters convert fieldbus to fiber with ease, and also feature easy configuration and effortless troubleshooting. Our industrial-grade ICF converters can convert PROFIBUS to fiber, even in harsh environments. CANbus to fiber converter, multi-mode, ST connector, 0 to 60°C. 100BaseFX ports (multi-mode ST connector). DIN-rail mounting. Input Voltage: 12 to 48 VDC.
    V.A.T. included
    Consult
    NOTIFIER® Interface for Network Extension ID2net [002-467]
    NOTIFIER® Interface for Network Extension ID2net
    Ref.: 002-467
    ID2net Network interface that allows to increase the wire distance between panels and connect a 002-452-001 repeater at any point of the network. Includes a metal cabin, network interface card and capacity to host two 12V 7A/h batteries and a source of power supply 020-648 (Not included). Requires 020-643 card for network connection through optic fiber and a RS232 card for repeater connection 002-452-001. Requires two 12V 7A/h batteries and a source of power supply 020-648.
    V.A.T. included
    Consult
    NOTIFIER® Interface for ID2net Network Connection by Optic Fiber [020-643]
    NOTIFIER® Interface for ID2net Network Connection by Optic Fiber
    Ref.: 020-643
    Interface card that allows to connect ID3000 panels with ID2net network through optic fiber cable, recommended for distances up to 500 meters or for industrial environments. Its connected to 020-647 card. Includes regeneration circuit and signal amplification. Maximum distance, depend of the fibre type, between hubs of 3000 meters. Requires 020-647 and multimode fibre of 62,5/125?m with maximum attenuation of 8dB or 50/125 ?m with a maximal attenuation of 4,2dB with ST connector.
    V.A.T. included
    Consult
    NOTIFIER® Interface for ID2net Network Connection [020-647]
    NOTIFIER® Interface for ID2net Network Connection
    Ref.: 020-647
    Interface card that allows to contect ID3000 centraks with ID2net network through twisted pair cable. Can be connected to CPU of ID3000 system and includes insulation of the electric circuit between hubs and RS232 interface for self-testung. Maximum distance between hubs, depend of the wire used, up to 1,000 meters,
    V.A.T. included
    Consult
    NOTIFIER® RS232 Communication Interface Board [020-478]
    NOTIFIER® RS232 Communication Interface Board
    Ref.: 020-478
    Optional card for RS232 serie communication interface. Optional card for RS232 communication interface, optoisolated to connect a dot matrix printing, control systems and technical management or graphics programs to ID300 analogical panels.
    V.A.T. included
    Consult
    NOTIFIER® RS485 Communication Interface Board [020-479]
    NOTIFIER® RS485 Communication Interface Board
    Ref.: 020-479
    Optional card for RS485 communication interface, with optical isolation, for signal repetition of ID3000 panel to which is connected.
    V.A.T. included
    Consult
    SYSAWAY© 2025 All rights reserved